E-link China Technology Co., Ltd.
| Payment Terms | T/T, Western Union, MoneyGram, Paypal |
| Supply Ability | 1000000000pcs/Month |
| Delivery Time | 3-5 working days |
| Packaging Details | 10 piece in 1 carton box |
| XENPAK MSA | Compatible |
| Connector | SC Receptacle |
| Wavelength | 1310nm DFB Laser |
| Power | +3.3V, APS(+1.2V) |
| Interface | MDIO 2-wire |
| 70-PIN Connector | Support |
| Brand Name | E-link China |
| Model Number | LNK-XENPAK-10G-LR |
| Certification | CE, RoHS, FCC |
| Place of Origin | Shenzhen, China |
View Detail Information
Explore similar products
ABS Housing SFP Optical Transceiver Module CWDM Mux/Demux Low Insertion Loss
Handheld Optical Detectors For SFP & SFP+ Optical Transceivers , Fiber Optic
CWDM Mux/Demux SFP Optical Transceiver Module 1270-1610nm Wavelength In LGX
E- Link SFP Optical Transceiver Module CWDM Mux / Demux Module In 1U/2U Rack
Product Specification
| Payment Terms | T/T, Western Union, MoneyGram, Paypal | Supply Ability | 1000000000pcs/Month |
| Delivery Time | 3-5 working days | Packaging Details | 10 piece in 1 carton box |
| XENPAK MSA | Compatible | Connector | SC Receptacle |
| Wavelength | 1310nm DFB Laser | Power | +3.3V, APS(+1.2V) |
| Interface | MDIO 2-wire | 70-PIN Connector | Support |
| Brand Name | E-link China | Model Number | LNK-XENPAK-10G-LR |
| Certification | CE, RoHS, FCC | Place of Origin | Shenzhen, China |
| High Light | sfp bidirectional transceiver ，fiber optic transceiver module | ||
XENPAK 10GBASE-LR SC 1310nm DDM SFP Optical Transceiver Module
Features
Applications
Absolute Maximum Ratings
| Parameter | Symbol | Min | Max | Unit | Ref. |
| Storage Ambient Temperature Range | -40 | +85 | °C | non condensing | |
| Powered case Temperature Range | 0 | +70 | °C | non condensing | |
| Adaptable Power Supply (APS) | Vapsense | 0 | 1.5 | V | Voltage @ Pin APS Sense |
| Supply Voltage Range @ 3.3V | Vcc3 | -0.5 | 4.0 | V |
Any stress beyond the maximum ratings can result in permanent damage. The device specifications are guaranteed only under the recommended operating conditions.
Operating Conditions
| Parameter | Symbol | Min | Typical | Max | Unit | |
| Operating Case Temperature | Tc | 0 | +70 | °C | ||
| Power Supply Voltage | VCC3 | 3.14 | 3.3 | 3.47 | V | |
| VAPS | 1.152 | 1.2 | 1.248 | |||
| Power Dissipation | PD | 3.5 | W | |||
Optical Interface
Transmitter Characteristics
| Parameter |
Symbol |
Min. |
Typ. |
Max. |
Unit |
Note |
| Operating Range |
|
|
|
10 |
Km |
|
| Operating Date Rate | 10.3125 | Gb/s | ||||
| Average Optics Power | Po |
-8.2 |
|
0.5 |
dBm | |
| Input Centre Wavelength | λ | 1260 | 1310 | 1355 | nm | |
| SMSR. | SWSR | 30 | dB | |||
| Extinction Ratio |
ER |
3.5 |
|
|
|
|
| Optical Modulation Amplitude |
OMA |
500 |
|
|
µW |
|
| Transmitter and Dispersion Penalty |
TDP |
|
|
3.2 |
dB |
|
| Parameter |
Symbol |
Min. |
Typ. |
Max. |
Unit |
Note |
| Operating Date Rate | 10.3125 | Gb/s | ||||
| Average Optics Power | Po |
0.5 |
|
|
dBm | |
| Sensitivity in OMA | OMA0 | -12.6 | dBm | |||
| Stressed Sensitivity in OMA |
OMAst |
|
|
-10.3 |
dBm |
|
| Sensitivity MINI |
Pmin |
|
|
-14.4 |
dBm |
1 |
Note :
1. Measured at 10.3125Gb/s,Non-framed PRBS2^31-1,NRZ
XAUI I/O Characteristics
| Parameter | Symbol | Min. | Typ. | Max. | Unit | Note |
| XAUI Date Rate | DR | 3.125 | Gb/s | |||
| XAUI Baud Rate Tolerance | -100 | +100 | ppm | Relative Tolerance | ||
| Differential Input Voltage Swing | 220 | 1600 | mv | 8B/10B Coded Input Signal | ||
| Differential Output Voltage Swing | 800 | 1600 | mVp-p | RLOAD = 100Ω ± 5% | ||
| Differential Input Impedance | 80 | 100 | 120 | Ω | ||
| Total Output Jitter | TJXAUI | 0.35 | UI | no pre-equalization | ||
| Total Deterministic Output Jitter | DJXAUI | 0.17 | UI | no pre-equalization |
Signal Specifications – Electrical
| Parameter | Symbol | Min | Typ | Max | Units |
| 1.2 V CMOS | |||||
| Input High Voltage | VIL(MAX) | - | - | 0.36 | V |
| Input Low Voltage | VIH(MIN) | 0.84 | - | 1.25 | V |
| Capacitance | - | - | 320 | pF | |
| Pull Up Resistance | Rpull | 4.7k | 10k - | 22k | ohm |
| MDIO I/O | |||||
| Output Low Voltage | VOL | -0.3 | - | 0.2 | V |
| Output Low Current | IOL | - | - | 4 | mA |
| Input High Voltage | VIH | 0.84 | - | 1.5 | V |
| Input Low Voltage | VIL | -0.3 | - | 0.36 | V |
| Pull-up Supply Voltage | VPULL | 1.14 | 1.2 | 1.26 | |
| Input Capacitance | CIN | - | - | 10 | Pf |
| Load Capacitance | CLOD | - | - | 470 | Pf |
| External Pull-up Resistance | EPULL | 200 | - | - | Ohm |
Pin Definitions
| Pin No | Name | Dir | Function | Notes |
| 1 | GND | Electrical Ground | 1 | |
| 2 | GND | Electrical Ground | 1 | |
| 3 | GND | Electrical Ground | 1 | |
| 4 | 5.0V | Power | 2 | |
| 5 | 3.3V | Power | 2 | |
| 6 | 3.3V | Power | 2 | |
| 7 | APS =1.2V | Adaptive Power Supply | 2 | |
| 8 | APS =1.2V | Adaptive Power Supply | 2 | |
| 9 | LASI |
Open Drain Compatible 10K-22K pull up on host. Logic High: Normal Operation Logic Low: LASI Asserted |
3 | |
| 10 | RESET | I |
Open Drain compatible. 10-22K pull-up on transceiver Logic high = Normal operation Logic low = Reset Minimum reset assert time 1 ms |
3 |
| 11 | VEND SPECIFIC |
Vendor Specific Pin. Leave unconnected when not in use. |
6 | |
| 12 | TX ON/OFF | I |
Open Drain compatible. 10-22K pull-up on transceiver Logic high = Transmitter On (capable) Logic low = Transmitter Off (always) |
3 |
| 13 | RESERVED | Reserved | 3 | |
| 14 | MOD DETECT | O | Pulled low inside module through 1k | |
| 15 | VEND SPECIFIC |
Vendor Specific Pin. Leave unconnected when not in use. |
6 | |
| 16 | VEND SPECIFIC |
Vendor Specific Pin. Leave unconnected when not in use. |
6 | |
| 17 | MDIO | I/O | Management Data IO | 3, 4 |
| 18 | MDC | I | Management Data Clock | 3, 4 |
| 19 | PRTAD4 | I | Port Address Bit 4 (Low = 0) | 3 |
| 20 | PRTAD3 | I | Port Address Bit 3 (Low = 0) | 3 |
| 21 | PRTAD2 | I | Port Address Bit 2 (Low = 0) | 3 |
| 22 | PRTAD1 | I | Port Address Bit 1 (Low = 0) | 3 |
| 23 | PRTAD0 | I | Port Address Bit 0 (Low = 0) | 3 |
| 24 | VEND SPECIFIC |
Vendor Specific Pin. Leave unconnected when not in use. |
6 | |
| 25 | APS SET | Feedback input for APS | ||
| 26 | RESERVED | Reserved for Avalanche Photodiode use. | 6 | |
| 27 | APS SENSE | APS Sense Connection | ||
| 28 | APS =1.2V | Adaptive Power Supply | 2 | |
| 29 | APS =1.2V | Adaptive Power Supply | 2 | |
| 30 | 3.3V | Power | 2 | |
| 31 | 3.3V | Power | 2 | |
| 32 | 5.0V | Power | 2 | |
| 33 | GND | Electrical Ground | 1 | |
| 34 | GND | Electrical Ground | 1 | |
| 35 | GND | Electrical Ground | 1 | |
| 36 | GND | Electrical Ground | 1 | |
| 37 | GND | Electrical Ground | 1 | |
| 38 | RESERVED | Reserved | ||
| 39 | RESERVED | Reserved | ||
| 40 | GND | Electrical Ground | 1 | |
| 41 | RX LANE0+ | O | Module XAUI Output Lane 0+ | 5 |
| 42 | RX LANE0- | O | Module XAUI Output Lane 0- | 5 |
| 43 | GND | Electrical Ground | 1 | |
| 44 | RX LANE1+ | O | Module XAUI Output Lane 1+ | 5 |
| 45 | RX LANE1- | O | Module XAUI Output Lane 1- | 5 |
| 46 | GND | Electrical Ground | 1 | |
| 47 | RX LANE2+ | O | Module XAUI Output Lane 2+ | 5 |
| 48 | RX LANE2- | O | Module XAUI Output Lane 2- | 5 |
| 49 | GND | Electrical Ground | 1 | |
| 50 | RX LANE3+ | O | Module XAUI Output Lane 3+ | 5 |
| 51 | RX LANE3- | O | Module XAUI Output Lane 3- | 5 |
| 52 | GND | Electrical Ground | 1 | |
| 53 | GND | Electrical Ground | 1 | |
| 54 | GND | Electrical Ground | 1 | |
| 55 | TX LANE0+ | I | Module XAUI Input Lane 0+ | 5 |
| 56 | TX LANE0- | I | Module XAUI Input Lane 0- | 5 |
| 57 | GND | Electrical Ground | 1 | |
| 58 | TX LANE1+ | I | Module XAUI Input Lane 1+ | 5 |
| 59 | TX LANE1- | I | Module XAUI Input Lane 1- | 5 |
| 60 | GND | Electrical Ground | 1 | |
| 61 | TX LANE2+ | I | Module XAUI Input Lane 2+ | 5 |
| 62 | TX LANE2- | I | Module XAUI Input Lane 2- | 5 |
| 63 | GND | Electrical Ground | 1 | |
| 64 | TX LANE3+ | I | Module XAUI Input Lane 3+ | 5 |
| 65 | TX LANE3- | I | Module XAUI Input Lane 3- | 5 |
| 66 | GND | Electrical Ground | 1 | |
| 67 | RESERVED | Reserved | ||
| 68 | RESERVED | Reserved | ||
| 69 | GND | Electrical Ground | 1 | |
| 70 | GND | Electrical Ground | 1 |
Company Details
Business Type:
Manufacturer
Year Established:
2001
Total Annual:
10000000-20000000
Employee Number:
100~150
Ecer Certification：
Verified Supplier
Established in 2001& headquartered in Shenzhen, E-link China Technology Co., Ltd. (E-link) is a leading Fiber Optic Communication and CCTV Security Transmission product manufacturer in China. Our main products include active equipments including fiber media converters, CCTV fiber converters... Established in 2001& headquartered in Shenzhen, E-link China Technology Co., Ltd. (E-link) is a leading Fiber Optic Communication and CCTV Security Transmission product manufacturer in China. Our main products include active equipments including fiber media converters, CCTV fiber converters...
Get in touch with us
Leave a Message, we will call you back quickly!