SZLH25 15kw Cattle Feed Production Unit For Small Feed Factories

Product Specification

Animal Feed Pellet Machine Cattle Feed Manufacturing Plant Animal Feed Making Machine

Feed pellet machine is the key equipment for the production of pellet feed, suitable for small feed factories, aquaculture farms and professional households to produce poultry, livestock, aquatic pellet feed.

The machine has absorbed the advantages of domestic and foreign granulating equipment, combined with my factory design and manufacturing experience developed from the small pellet feed pressing machine.

The feeding system is controlled by stepless variable speed motor, which is convenient for speed regulation. The main drive system is driven by gear.

It has the advantages of high output, low noise, low energy consumption, long working life and easy operation and maintenance

No magnetic separation iron removal and overload protection device, safe and reliable work.

Parameter:

So how to control the moisture content required for feed mixing in the work?

1. The moisture content of the single raw material purchased is strictly determined.

2. Test the first sample of the processed feed, that is, measure the initial moisture of the mixed raw materials in each shift.

3. After measuring the moisture of the original material, calculate its theoretical mixing value according to the moisture ratio to decide whether to add water component to meet the actual moisture value requirements of the feed.

Therefore, in the process of mixed feed, the coefficient of moisture uniformity and variation determine the quality of mixed feed, which has a direct impact on the subsequent processing process and plays an important role in the storage and quality of materials.

Feed pellet machine common faults and troubleshooting methods:
First, because the pellet machine produced by our company is a precision bearing transmission, the high-efficiency power input is ensured while the power loss in the belt conveyor of the pellet machine is eliminated. The precision bearing gearbox pellet motor is directly connected to the pellet machine to make the pellet machine It has more power during operation and lower power loss. There are many precision bearing parts in the granule machine gearbox that need lubrication. After receiving the granule machine, add 4L gear oil to the granule machine. Different oil types may have different amounts.
The butter on the main shaft of the pellet machine has been filled before leaving the factory, and it needs to be greased every 15 days. (Need to choose high temperature butter)

Second, the pellet machine just received will not reach the normal output, which is a normal phenomenon, because the pellet machine is all new machine, the pellet machine just running does not reach the running state, after the standby device is used for a period of time, the pellet Please understand that the production and discharge quality of the pellet machine will reach the state after the parts of the machine are grounded to the state.
1. The output of the feed pellet machine is too low or even granules or a lot of powder. Although this problem does not occur often, if it appears, it means that you have not grinded the pressure roller and the grinding disc during the grinding process of the pellet machine. The reason for the similar problem may be the poor finish of the grinding disc for the first time. After grinding the disc with the abrasive or after using for a period of time, the output of the pellet machine will reach the normal output.