Product Specification
|
|
|
|
| Payment Terms |
T/T (30% payment in advance, the balance is paid at the sight of B/L copy) |
Supply Ability |
1000Sets per Months |
| Delivery Time |
Within 30~45 days after received payment |
Packaging Details |
Woden Case |
| Material of body |
Ductile Iron / Cast Iron |
Material of bonnet |
Ductile Iron / Cast Iron |
| Material of wedge |
Ductile Iron with NBR/EPDM |
Stem |
2Cr13 |
| Mesh |
Stainless Steel |
Pressure |
PN10/PN16 |
| Finish |
EPOX Coating |
HS Code |
8481804090 |
| Standard |
DIN Standard |
Brand Name |
INOVI |
| Model Number |
DIN3202-F1 |
Place of Origin |
CHINA |
| High Light |
DIN3202 Cast Iron Valves PN16
，Cast Iron Valves PN10
，Y Strainer Ductile Iron
|
Y Strainer Ductile or Cast Iron DIN3202 - F1 PN16/PN10
The strainer incorporates a stainless steel wire mesh or punched plate that filters out foreign matter in the piping (such as sediment and iron rust in piping), and has a structure that can remove accumulated foreign matter from the piping.
This prevents foreign matter from damaging valve and related equipment, and enhances the safety and durability of facilities and equipment.
Correspond to various fluids INOVI strainer
Various fluids such as water, oil, gas, air, and steam flowing through the piping line may contain foreign matter, corrosion in the piping, dust caused by leaking gaskets, etc., and if left as it is, the valve seats of various valve installed in the piping line may be damaged, shortening their life, and the various devices may not operate normally or damage the devices. To prevent these problems, a strainer that separates and eliminates foreign matter and debris in the fluid plays an important role in the piping line.
Strainers are classified into Y-type strainer and U-type strainer according to their shapes. INOVI supply Y-type strainer, which have relatively low fluid-resistance and a compact mounting space. U-type strainer, which allow direct piping to equipment.
Type and selection of Y-type strainer screen
The strainer incorporates a screen to eliminate foreign matter, dirt, etc. in the fluid, but it is necessary to select the mesh of the screen considering the type of fluid, prescribed pressure, flow velocity, etc. The screen of the Y-shaped strainer has a perforated-plate screen with holes drilled in the stainless steel sheet at the specified pitch, a plain-woven and tatami-woven wire mesh made of stainless steel wire, and a double-structured screen with a perforated plate for reinforcement attached to this wire mesh.
Stainless steel wire mesh type
The stainless steel wire mesh type is marking with a mesh. A mesh is a unit representing the number of meshes in a wire mesh, and refers to the number of meshes in a row between 1 inch for plain weaving. The larger the number of meshes, the finer the mesh. Note, however, that the opening area varies depending on the wire diameter even for the same mesh. The right figure shows a 5-mesh screen with 5 meshes in a row between 1 inch.
Cast iron has a long history that dates back hundreds of years and is mainly employed for low-pressure, low-temperature applications. All INOVI Cast iron valves are manufactured in our specialized plant under our strict quality control system. INOVI cast iron valves are commonly used for a wide range of applications, including air-conditioning and plumbing in buildings, fire fighting equipment, water and sewer lines and utility systems in various industrial plants.
Scene of use
- ・Air-conditioning and sanitation of building equipment, factory production equipment, machine tools, equipment, etc.
Main applicable fluids
- ・Water, oil, gas (non-flammable)
Point of technology
- ・we offer a lineup that is compatible with DIN standard “gray cast iron valve.”
- ・The steering wheel is designed for ease of gripping and operability from an ergonomic point of view.
- ・0.01mg/L and below are cleared and can be used as a valve for water supply.
- ・Cast iron linings are valve for high temperature and high pressure applications such as petroleum plants.
- ・Cast iron linings can be as large as 2B or larger than 60B.
Ductile cast iron Low temperature and high pressure
Ductile iron has much stronger mechanical properties than ordinary cast steel. Ductile valves also have a wide range of operating pressures and temperatures, and are more economical than stainless steel valves. In response to market demands, IVOVI group have a lineup of bellows seal valves, and the standardized ductile valves used in water, air, gas, oil, and other applications.
Ductile valves are valve made of free-carbon spheroidized ductile iron (FCD-S) called graphite in the metallographic structure. Ductile iron has stronger mechanical properties than ordinary cast iron. Ductile cast iron (FCD-S) is used for INOVI’s ductile valve, and the graphite spheroidizing in the structure is different from that of malleable cast iron. Ductile cast iron is more suitable for valve in mechanical properties than maleable cast iron. Ductile valve is widely used in industrial applications such as steam, gases, oils and water.
Scene of use
- ・Air-conditioning and sanitation of building equipment, factory production equipment, machine tools, equipment, etc.
Flammable gases, gas lines, etc. (approved under high pressure gas)
Main applicable fluids
- ・Steam, fuel oil, flammable gas
Point of technology
- ・Ductile valves are more economical than cast steel/stainless valve.
- ・This product has a wide operating pressure and temperature range. It can be used not only for general-purpose applications such as building facilities, but also as a valve for high-pressure gas facilities, pressure vessels, and hazardous material storage tanks.
Application as valve
- ・For steam, gas, and oil
- ・Valve which is cheaper than cast steel and higher in strength than cast iron
INOVI Supply a wide range of valves are used in the construction of office buildings, hotels, public facilites, homes and other facilities among many of the consttruction facilities, including air conditioning equipment, heat exchange piping for heat source equipment, hot water supply equipment With our integrated piping systems, supported by our unique digital design service, you always get the best and most efficient solution for installing an integrated piping system. From the moment your plan is drawn up on the digital drawing board, we provide advice on our complete and tailor-made solutions.
Highlights
Cast iron (cast iron lining) Normal temperature and low pressure
It has a relatively low melting point of 1150℃, and is used in valve for low pressure and room temperature.
INOVI cast iron valve is manufactured at a dedicated plant from foundry to thorough quality-control.
Cast iron valve is used in a wide range of fields, including air conditioning, water supply and drainage of building facilities, fire extinguishing systems, water supply and sewerage systems, and ancillary facilities of various plants.
Cast iron lining is made by lining internal and external surfaces of valve made of cast iron with nylon or epoxy.
INOVI cast iron linings have been subjected to extreme caution, from the subsurface treatment of cast iron to lining treatment, inspection, and shipping, in order to demonstrate the resin’s superior corrosion resistance.
It is used in various tap water and seawater lines.
Manufacturer's Guarantee
INOVI Supply a wide range of valves are used in the construction of office buildings, hotels, public facilites, homes and other facilities among many of the consttruction facilities, including air conditioning equipment, heat exchange piping for heat source equipment, hot water supply equipment. With our integrated piping systems, supported by our unique digital design service, you always get the best and most efficient solution for installing an integrated piping system. From the moment your plan is drawn up on the digital drawing board, we provide advice on our complete and tailor-made solutions.
Basic Knowledge of Valves
Welcome to the Basic Knowledge of Valves site. Some of you may be less familiar with “valve.” “However, “”valve”” firmly supports your everyday lives in the shade.”
The origin of ” valve ” can be traced back to the wooden cock excavated from the ancient Egyptian ruins around 1000 BC. In the ancient Roman period, a water pipe was laid in the aristocracy’s house, and a bronze cock was attached to the outlet. In this way, metallic valve has been in practical use for more than 2000 years.
Today, valve is used in a variety of activities to protect the global environment. These include kitchens, bathrooms, washrooms, air-conditioning equipment in office buildings, various facilities in manufacturing plants, vehicles such as automobiles and trains, and power stations and incinerators.
We would like you to know, pay attention to, and be familiar with valve, which has a long history and is active in a wide range of fields, from home to business.
Company Details
Bronze Gleitlager
,
Bronze Sleeve Bushings
and
Graphite Plugged Bushings
from Quality China Factory
-
Business Type:
Manufacturer,Exporter
-
-
Total Annual:
1000000-50000000
-
Employee Number:
100~200
-
Ecer Certification：
Verified Supplier
+ Read More
