Product Specification

Ductile Iron Single Ball Air Valve Screwed DIN/BS/ANSI/JIS Standard PN16/PN10

Screwed End

This connention method uses pipe threads and is mainly used for connections of sizes 2 inches or smaller and pressures of 1 MPa or less. Because it is easy to install only by thread processing, it is economical because it does not require a large number of parts compared with other connection methods. On the other hand, it becomes difficult to redo it in repairs, etc. There are “female thread and male thread” and “taper thread and parallel thread” for the types of screws. valve is “taper female thread” for the majority.

Valve is connected to the pipes to form a pipe system so that the fluid can be flowed for the first time.
Therefore, the connection between valve and the pipe is a critical part, and after connection, careful work is required to prevent leakage or breakage.
In addition, when classifying valve, it is sometimes classified by the construction of the connecting end.
This section describes the most basic “screw-in type”, “flange type”, and “welded type”.

Scene of use

• ・Air-conditioning and sanitation of building equipment, factory production equipment, machine tools, equipment, etc.
  Flammable gases, gas lines, etc. (approved under high pressure gas)

Main applicable fluids

• ・Steam, fuel oil, flammable gas

Point of technology

• ・Ductile valves are more economical than cast steel/stainless valve.
• ・This product has a wide operating pressure and temperature range. It can be used not only for general-purpose applications such as building facilities, but also as a valve for high-pressure gas facilities, pressure vessels, and hazardous material storage tanks.

Application as valve

• ・For steam, gas, and oil
• ・Valve which is cheaper than cast steel and higher in strength than cast iron

INOVI Supply a wide range of valves are used in the construction of office buildings, hotels, public facilites, homes and other facilities among many of the consttruction facilities, including air conditioning equipment, heat exchange piping for heat source equipment, hot water supply equipment With our integrated piping systems, supported by our unique digital design service, you always get the best and most efficient solution for installing an integrated piping system. From the moment your plan is drawn up on the digital drawing board, we provide advice on our complete and tailor-made solutions.

​Highlights

It has a relatively low melting point of 1150℃, and is used in valve for low pressure and room temperature.

INOVI cast iron valve is manufactured at a dedicated plant from foundry to thorough quality-control.
Cast iron valve is used in a wide range of fields, including air conditioning, water supply and drainage of building facilities, fire extinguishing systems, water supply and sewerage systems, and ancillary facilities of various plants.

Cast iron lining is made by lining internal and external surfaces of valve made of cast iron with nylon or epoxy.
INOVI cast iron linings have been subjected to extreme caution, from the subsurface treatment of cast iron to lining treatment, inspection, and shipping, in order to demonstrate the resin’s superior corrosion resistance.
It is used in various tap water and seawater lines.

Manufacturer's Guarantee

 
INOVI Supply a wide range of valves are used in the construction of office buildings, hotels, public facilites, homes and other facilities among many of the consttruction facilities, including air conditioning equipment, heat exchange piping for heat source equipment, hot water supply equipment. With our integrated piping systems, supported by our unique digital design service, you always get the best and most efficient solution for installing an integrated piping system. From the moment your plan is drawn up on the digital drawing board, we provide advice on our complete and tailor-made solutions.

Basic Knowledge of Valves

Welcome to the Basic Knowledge of Valves site. Some of you may be less familiar with “valve.” “However, “”valve”” firmly supports your everyday lives in the shade.”

The origin of ” valve ” can be traced back to the wooden cock excavated from the ancient Egyptian ruins around 1000 BC. In the ancient Roman period, a water pipe was laid in the aristocracy’s house, and a bronze cock was attached to the outlet. In this way, metallic valve has been in practical use for more than 2000 years.

Today, valve is used in a variety of activities to protect the global environment. These include kitchens, bathrooms, washrooms, air-conditioning equipment in office buildings, various facilities in manufacturing plants, vehicles such as automobiles and trains, and power stations and incinerators.

We would like you to know, pay attention to, and be familiar with valve, which has a long history and is active in a wide range of fields, from home to business.