Hvac System Standing CCC 340m3/H Make Up Air Handling Unit

Product Specification

HVAC System Make up Air Handling Unit Standing Vertical Fan Coil Unit

Product Overview
Integral stamping streamline air inlet
Copper tube string sets of highly efficient two-way cracked aluminum fins
Innovative air inlet flange design
The water receiving tray is formed by one-time stamping and inclined installation
The left and right type of the unit can be interchanged freely on site, and the rear return air and lower return air can be freely swapped on site.
Structural characteristics

Fan
Stable and stable operation, low noise-the use of a streamlined air inlet with integrated stamping, smooth air flow, small loss, compact structure, high strength, can reduce the noise of the impeller at high speed. Apply thread-locking glue to the impeller fixing bolt, and then fix the impeller firmly on the motor shaft with a fixed torque wrench. Each fan has gone through four dynamic and static balance tests of the middle plate, impeller, complete machine, and factory license, and truly achieves high reliability.

Coil
High heat transfer efficiency, rich in cold and heat-using copper tube string sets of high-efficiency bidirectional cracked aluminum fins, sinusoidal bidirectional cracks with windows and full form, arranged in an orderly and hierarchical manner, which fully increases the heat transfer area and improves Heat transfer efficiency. The copper tube and aluminum foil are tightly combined through a precise mechanical tube expansion device, which fully improves the heat transfer efficiency.

Water tray
Smooth drainage and no stagnant water-using one-time stamping: no welding at the four corners, no rust, no water leakage, overall PE insulation, no joints, no bubbles, and no condensation. In addition, the diversion structure is stamped in the water receiving tray, and the inclined installation is specially designed when it is installed on the unit, so that the condensed water is discharged more smoothly, and no water is generated in the water receiving tray.

Motor
Durable and low noise--Single-phase capacitor motor, three-speed adjustable, sufficient overload capacity, withstand voltage AC1000 for 1 minute, high-precision high-quality ball bearing, no need to refuel, self-lubrication, low noise, running life> 70000h The central axis is quenched and tempered and the surface is anticorrosive. The design of the hexagonal hole and the rivet nut improves the safety performance of the fan support plate and bolt connection. It will not slip and loosen. A torque pneumatic wrench is used to make the motor more reliably connected to the fan support plate.

The best match for central air-conditioning
The latest fan coil unit is carefully designed and manufactured based on the characteristics of excellent products at home and abroad, and can be widely used in shopping malls, hospitals, office buildings and other places. Compact structure, novel shape, abundant heat and cold, low noise, convenient installation and maintenance, it is your ideal choice product.
Diverse types: There are horizontal concealed, horizontal exposed, vertical concealed, vertical exposed, vertical and horizontal, wall-mounted, luxurious vertical exposed, ceiling embedded four-blowing and two hair dryer coil for selection.
Complete specifications: air volume range from 190-5950m3 / h, cooling capacity range from 1770-29700W, static pressure types are 12Pa 30Pa 50Pa 120Pa, etc. There are two types of heat exchangers, divided into 2 rows and 3 rows, 2 + 1 And 3 + 1.
 

Fan coil units

1. Cooling: The inlet and outlet water temperature is 7ºC/12ºC, the inlet dry bulb temperature is DB27.0ºC, and the wet bulb temperature is WB19.5ºC.
2. Heating: The inlet and outlet water temperature is 60ºC/50ºC, and the inlet air dry bulb temperature is DB21.0ºC.
3. The noise in the table is the unit measured in the background noise 16.5dB (A) of the total anechoic chamber (according to GB/T19232-2003).
4. The outlet static pressure of the low-static compressor unit with tuyere and filter is 0Pa;The outlet static pressure is 12Pa without tuyere and filter.
5. If the actual working condition is different from the standard working condition, please refer to the data in the correction coefficient table in the sample for correction.
Correction method: Actual refrigeration (heat) capacity = rated refrigeration (heat) capacity × working condition correction coefficient.

Company Profile

Dezhou Aoxin Air Conditioning Equipment Co., Ltd. (formerly Shandong Jianhua Air Conditioning Equipment Co., Ltd.), founded in 1997, is located in Tengzhuang Industrial Development Zone, Dezhou City, Shandong Province, both transportation and communication are convenient. It is a specialized enterprise in the manufacturing of central air conditioning equipment, with strong technical force and production product quality is reliable, service is warm and thoughtful, management concept is novel, mechanism is flexible, adaptability is strong and stands in the industry.
In the increasingly fierce international and domestic competition, Aoxin Air Conditioning is determined to adopt the way of absorbing the world's advanced technology and developing its own high-tech products, and constantly develop high-grade, high-tech content and high added value products. With advanced equipment, perfect technology and scientific management, Aoxin's central air conditioning series products are based on the domestic market and towards the international market.