Zhangjiagang U Tech Machine Co., Ltd
| Payment Terms | L/C, T/T |
| Supply Ability | 15 Set/Sets per Month |
| Delivery Time | 45 work days |
| Packaging Details | Wooden Case for 5L-10L-15L-20L HDPE Plastic Jerry Can Tank Container Drum Extrusion Blowing Mould /Blow Molding Machine |
| Condition | New |
| Material | Stainless Steel |
| Automatic | Yes |
| Warranty | 2 Years |
| Max. Product Volume | 5L |
| Weight | 4.5T |
| Screw Dia. | 75, 80, 90 mm |
| Dimension | 1960x1180x1960mm |
| Brand Name | U TECH |
| Model Number | BST-5 |
| Certification | CE SGS ISO |
| Place of Origin | Jiangsu, China (Mainland) |
View Detail Information
Explore similar products
Medicine Bottle Plastic Blow Molding Machine / Extrusion Moulding Machine
Plastic HDPE Extrusion Blow Molding Machine 5 Liter Two Years Warranty
Engine Oil Bottle Plastic Bottle Blow Molding Machine Automatic Extrusion
Double Station Plastic Blow Molding Machine / Hdpe Blow Moulding Machine
Product Specification
| Payment Terms | L/C, T/T | Supply Ability | 15 Set/Sets per Month |
| Delivery Time | 45 work days | Packaging Details | Wooden Case for 5L-10L-15L-20L HDPE Plastic Jerry Can Tank Container Drum Extrusion Blowing Mould /Blow Molding Machine |
| Condition | New | Material | Stainless Steel |
| Automatic | Yes | Warranty | 2 Years |
| Max. Product Volume | 5L | Weight | 4.5T |
| Screw Dia. | 75, 80, 90 mm | Dimension | 1960x1180x1960mm |
| Brand Name | U TECH | Model Number | BST-5 |
| Certification | CE SGS ISO | Place of Origin | Jiangsu, China (Mainland) |
| High Light | automatic blow moulding machine ，blow molding equipment | ||
5L PP bottles energy-saving automatic plastic blow molding machine
Introduction
This machine belongs to the continuous extrusion blow molding equipment, plastic raw materials through the extruder plasticizing and mixing, forming organization, colour, temperature uniformity of the melt, through the joint, the port into the loading cylinder, by charging - to the next blow mouth, the loading cylinder device, clamping closing, blowing tube billet with the mould cavity, cooling stereotypes make products appearance repetition mold cavity, and then open the mould products molding, the same process.
The machine is suitable for working under the following environmental conditions:
1. The altitude is not higher than 2000 meters
2. Working environment air temperature: +5℃-+40℃;
3. The relative humidity of working environment should not be more than 85 percent;
4. Working environment atmospheric pressure 0.85-1.1 standard atmosphere;
5, the workplace without strong electric field, strong magnetic field, strong electromagnetic radiation, strong ultraviolet radiation, strong vibration wave;
6. Air flow speed in the workplace shall not be greater than level 3;
7. Power supply: 38V(AC),50Hz;
8. The air source is dry and clean, with a pressure of 0.8-1.0mpa and stable pressure;
9. There is no dirt in the cooling water, the water temperature is 10℃--30℃, the water pressure is 0.1-0.4 MPa, and the pressure is stable;
10. Tilt Angle of the machine shall not be greater than 3°;
11. Bearing capacity of installed foundation shall not be less than 2MPa.
Parameter
| SPECIFICATIONS FOR 5 L Blow Molding Machine | |||
|
| Max. Product Volume | 5 L |
|
| Product Max. Dia. | 18 CM | ||
| Thickness of Mould | 150-220 mm | ||
| Width of Mould Board | 303 mm | ||
| Distance of Mould Board | 230 mm | ||
| Production Speed | 200-300 PCS/HR | ||
| Applicable Raw Material | HDPE/LDPE/PP | ||
| Distance of Mold | 160-500 mm | ||
| Force of Closing Mold | 60 KN | ||
|
Machine Parameters | Screw Dia. | 75, 80, 90 mm | |
| Screw Rod Length/Dia. Ratio | 25:1 | ||
| Speed Control Method | PLC | ||
|
Energy Consumption | Heating Power | 15 KW | |
| Hydraulic Pump Power | 4.5 KW | ||
| Extruder Motor Power | 18.5 KW | ||
| Air Consumption | 0.6 m3/Min. | ||
| Machine Dimension and weight | Dimension | 1960x1180x1960mm | |
| Weight | 4.5 Ton | ||
Company Details
Business Type:
Manufacturer
Year Established:
2008
Total Annual:
10,000,000-30,000,000
Employee Number:
51~100
Ecer Certification：
Active Member
Company Introduction ZHANGJIAGANG U TECH MACHINE was founded at 2008.It is located at Zhangjiagang city economic industrial town,We devote ourselves to the development, research and production of extrusion blow molding machine Our Main products including: extrusion blow molding machine ,leak test... Company Introduction ZHANGJIAGANG U TECH MACHINE was founded at 2008.It is located at Zhangjiagang city economic industrial town,We devote ourselves to the development, research and production of extrusion blow molding machine Our Main products including: extrusion blow molding machine ,leak test...
Get in touch with us
Leave a Message, we will call you back quickly!