Zhangjiagang U Tech Machine Co., Ltd
| Payment Terms | L/C, T/T |
| Supply Ability | 15 Set/Sets per Month |
| Delivery Time | 45 work days |
| Packaging Details | Wooden Case for 5L-10L-15L-20L HDPE Plastic Jerry Can Tank Container Drum Extrusion Blowing Mould /Blow Molding Machine |
| Condition | New |
| Material | Stainless Steel |
| Automatic | Yes |
| Warranty | 2 Years |
| Max. Product Volume | 5L |
| Weight | 4.5T |
| Speed Control Method | PLC |
| Distance of Mold | 160-500 mm |
| Screw Rod Length/Dia. Ratio | 25:1 |
| Brand Name | U TECH |
| Model Number | BST-5 |
| Certification | CE SGS ISO |
| Place of Origin | Jiangsu, China (Mainland) |
View Detail Information
Explore similar products
Medicine Bottle Plastic Blow Molding Machine / Extrusion Moulding Machine
Oil Drum Bottles Small Blow Moulding Machine Full Automatic Energy Saving
Engine Oil Bottle Plastic Bottle Blow Molding Machine Automatic Extrusion
Double Station Plastic Blow Molding Machine / Hdpe Blow Moulding Machine
Product Specification
| Payment Terms | L/C, T/T | Supply Ability | 15 Set/Sets per Month |
| Delivery Time | 45 work days | Packaging Details | Wooden Case for 5L-10L-15L-20L HDPE Plastic Jerry Can Tank Container Drum Extrusion Blowing Mould /Blow Molding Machine |
| Condition | New | Material | Stainless Steel |
| Automatic | Yes | Warranty | 2 Years |
| Max. Product Volume | 5L | Weight | 4.5T |
| Speed Control Method | PLC | Distance of Mold | 160-500 mm |
| Screw Rod Length/Dia. Ratio | 25:1 | Brand Name | U TECH |
| Model Number | BST-5 | Certification | CE SGS ISO |
| Place of Origin | Jiangsu, China (Mainland) | ||
| High Light | automatic blow moulding machine ，pp blow moulding machine | ||
Plastic HDPE extrusion blow molding machine 5L for plastic model
Introduction
In blow molding, hollow plastic parts are being formed through a manufacturing process that is generally categorized into three main methods, namely injection blow molding, extrusion blow molding and injection stretch blow molding. Basically, the extrusion blow molding starts with melting down the plastic and forming it into a parison—a rounded mass of molten material formed by rolling it immediately after being removed from the furnace, with its final form being a tube-like plastic that has a hole in one end that serves as a passage way for compressed air. This material is then clamped into a mold and then blown by air, of which pressure will push the plastic out in order to match the mold. Once it has cooled and hardened, the mold would open up to eject the part. In the case of injection and injection stretch blow molding, these processes use a preform, which is a piece that already has a form beforehand.
Now, many plastic manufacturers use this method for the obvious benefits it brings. However, there are also some drawbacks to it that we should be aware of to know whether it is best to employ for the betterment of all.
1. Control Unit: Japan Mitsubishi PLC programmable controller and Taiwan HITECH touch panel. English parameter process setting, state monitoring and products counting are convenient and intuitionistic. PLC automatic temperature control model.
2. Hydraulic Unit: It adopts international famous Japan YUKEN brand hydraulic valve and seal, proportional control. And has features of high stationarity and reliability, accurate operation, long longevity, quick response and so on.
3. Extrusion Unit: Hard gear surface decelerator; famous HFinverter inverter adopts Italian technology; Screw speed regulation adopts variable-frequency speed regulation control system. It has the features of stable rotate speed, powerful power, energy-saving and so on. Mixing screw has wide applicability to raw materials and the plasticization quality is even better. Energy-saving machine barrel and A-alloy heaters are adopted for heating.
4. Die Head Unit: With single cylinder material-center-in accumulator head, is smooth and dependable. This die head adopts German technology and is made by special imported steel.
5. Clamping Unit: Adopts fixed mould open-closing system,fast and balanced.
6. Blow Fitting Unit: Down blowing fitting is equipped.
7. Lifter Unit: Four turbine reducer liter, lifting balance, quick, stable.
8. Electrical Components: All of the electrical components are made in Japan and Taiwan.
Parameter
| SPECIFICATIONS FOR 5 L Blow Molding Machine | |||
|
| Max. Product Volume | 5 L |
|
| Product Max. Dia. | 18 CM | ||
| Thickness of Mould | 150-220 mm | ||
| Width of Mould Board | 303 mm | ||
| Distance of Mould Board | 230 mm | ||
| Production Speed | 200-300 PCS/HR | ||
| Applicable Raw Material | HDPE/LDPE/PP | ||
| Distance of Mold | 160-500 mm | ||
| Force of Closing Mold | 60 KN | ||
|
Machine Parameters | Screw Dia. | 75, 80, 90 mm | |
| Screw Rod Length/Dia. Ratio | 25:1 | ||
| Speed Control Method | PLC | ||
|
Energy Consumption | Heating Power | 15 KW | |
| Hydraulic Pump Power | 4.5 KW | ||
| Extruder Motor Power | 18.5 KW | ||
| Air Consumption | 0.6 m3/Min. | ||
| Machine Dimension and weight | Dimension | 1960x1180x1960mm | |
| Weight | 4.5 Ton | ||
Company Details
Business Type:
Manufacturer
Year Established:
2008
Total Annual:
10,000,000-30,000,000
Employee Number:
51~100
Ecer Certification：
Active Member
Company Introduction ZHANGJIAGANG U TECH MACHINE was founded at 2008.It is located at Zhangjiagang city economic industrial town,We devote ourselves to the development, research and production of extrusion blow molding machine Our Main products including: extrusion blow molding machine ,leak test... Company Introduction ZHANGJIAGANG U TECH MACHINE was founded at 2008.It is located at Zhangjiagang city economic industrial town,We devote ourselves to the development, research and production of extrusion blow molding machine Our Main products including: extrusion blow molding machine ,leak test...
Get in touch with us
Leave a Message, we will call you back quickly!