Zhangjiagang U Tech Machine Co., Ltd
| Payment Terms | L/C, T/T |
| Supply Ability | 15 Set/Sets per Month |
| Delivery Time | 45 work days |
| Packaging Details | Wooden Case for 5L-10L-15L-20L HDPE Plastic Jerry Can Tank Container Drum Extrusion Blowing Mould /Blow Molding Machine |
| Condition | New |
| Material | Stainless Steel |
| Automatic | Yes |
| Warranty | 2 Years |
| Max. Product Volume | 5L |
| Weight | 4.5T |
| Speed Control Method | PLC |
| Dimension | 1960x1180x1960mm |
| Applicable Raw Material | HDPE/LDPE/PP |
| Force of Closing Mold | 60KN |
| Brand Name | U TECH |
| Model Number | BST-5 |
| Certification | CE SGS ISO |
| Place of Origin | Jiangsu, China (Mainland) |
View Detail Information
Explore similar products
Plastic HDPE Extrusion Blow Molding Machine 5 Liter Two Years Warranty
Oil Drum Bottles Small Blow Moulding Machine Full Automatic Energy Saving
Engine Oil Bottle Plastic Bottle Blow Molding Machine Automatic Extrusion
Double Station Plastic Blow Molding Machine / Hdpe Blow Moulding Machine
Product Specification
| Payment Terms | L/C, T/T | Supply Ability | 15 Set/Sets per Month |
| Delivery Time | 45 work days | Packaging Details | Wooden Case for 5L-10L-15L-20L HDPE Plastic Jerry Can Tank Container Drum Extrusion Blowing Mould /Blow Molding Machine |
| Condition | New | Material | Stainless Steel |
| Automatic | Yes | Warranty | 2 Years |
| Max. Product Volume | 5L | Weight | 4.5T |
| Speed Control Method | PLC | Dimension | 1960x1180x1960mm |
| Applicable Raw Material | HDPE/LDPE/PP | Force of Closing Mold | 60KN |
| Brand Name | U TECH | Model Number | BST-5 |
| Certification | CE SGS ISO | Place of Origin | Jiangsu, China (Mainland) |
| High Light | automatic blow moulding machine ，pp blow moulding machine | ||
Plastic HDPE extrusion blow molding machine 5L for medicine bottle
Introduction
Extrusion blow molding is one of the most used methods for forming packaging containers.
Extrusion blow molding is a process in which a thermoplastic raw material is plasticized by an extruder and then passed through a specific die to obtain a tubular parison in a hot melt state. When the tubular thermoplastic parison still in a softened state reaches a predetermined length After entering the mold, the mold is closed, and then the compressed gas is introduced, and the blank is deformed along the cavity by the pressure of the gas, thereby blowing into a hollow product having a short neck opening.
1. The screw adopts high potency melt to make sure the material well mixed.
2. Adopt frequency control of motor system to reduce the power consumption.
3. Adopt horizontal movement frame to improve stability and speed.
4. The oil cylinder is in the center of the moldboard, uniform stress for quality products and increase life span.
5. High stench guild rod controller the mold open and clamp, to enhance the steadily and high efficiency.
6. The extrusion head use spreader or screw type to well mixed the thickness and easy to change different color.
7.Advanced design to eliminate the melt material degrade in the runner, to avoid the perform draw-down and the welding line.
8. The precise time control system assured good quality, suitable weight and reduces production cycle.
9. Freely to move the extrusion foundation backward or forward to make the exchange of the mold easy.
10. Multi-function bottom blowing type for shaped products.
11. The mechanical arm can take out the product automatically.
Parameter
SPECIFICATIONS FOR 5 L Blow Molding Machine | |||
| Max. Product Volume | 5 L |
|
Product Max. Dia. | 18 CM | ||
Thickness of Mould | 150-220 mm | ||
Width of Mould Board | 303 mm | ||
Distance of Mould Board | 230 mm | ||
Production Speed | 200-300 PCS/HR | ||
Applicable Raw Material | HDPE/LDPE/PP | ||
Distance of Mold | 160-500 mm | ||
Force of Closing Mold | 60 KN | ||
Machine Parameters | Screw Dia. | 75, 80, 90 mm | |
Screw Rod Length/Dia. Ratio | 25:1 | ||
Speed Control Method | PLC | ||
Energy Consumption | Heating Power | 15 KW | |
Hydraulic Pump Power | 4.5 KW | ||
Extruder Motor Power | 18.5 KW | ||
Air Consumption | 0.6 m3/Min. | ||
Machine Dimension and weight | Dimension | 1960x1180x1960mm | |
Weight | 4.5 Ton | ||
Company Details
Business Type:
Manufacturer
Year Established:
2008
Total Annual:
10,000,000-30,000,000
Employee Number:
51~100
Ecer Certification：
Active Member
Company Introduction ZHANGJIAGANG U TECH MACHINE was founded at 2008.It is located at Zhangjiagang city economic industrial town,We devote ourselves to the development, research and production of extrusion blow molding machine Our Main products including: extrusion blow molding machine ,leak test... Company Introduction ZHANGJIAGANG U TECH MACHINE was founded at 2008.It is located at Zhangjiagang city economic industrial town,We devote ourselves to the development, research and production of extrusion blow molding machine Our Main products including: extrusion blow molding machine ,leak test...
Get in touch with us
Leave a Message, we will call you back quickly!