PVC Pulverizer Machine For Pipe Profile Recycling Using

Product Specification

PVC Pulverizer Machine For Pipe Profile Recycling Using

PVC Pulverizer Machine​ Main model:

SMP-500; SMP-600; SMP-700; SMP-800

PVC Pulverizer Machine​ Application
Suitable material is HDPE LDPE LLDPE PVC PE PET pellet or flakes that the size is not surpass the 12mm ,soft PVC ,HARD pvc and so
on.
Final powder mesh size in genneral is between 20~80 mesh.
The powder mesh size is adjustbale.

PVC Pulverizer Machine​ Features:

• It is advanced and developed.
• It can improve the output by 20%-50% under the same power consumption with other mills.
• It is best for saving expense, reducing cost and solving waste plastic.
• By adding a dust-absorbing system, it greatly reduces the powder pollution.
• Material exceeding by fan relaxes the labor intension.
• The door of the main machine can be opened to make the inspection and blade exchange more easily.
• It uses water-wind cooling method so as to reduce the working temperature. And so the powder is more stable. Water cooling for fix blade tray, bearings device, and outlet gate for the material etc so that the temperature of the grinding is kept lower than normal.

PVC Pulverizer Machine​ Function description:

• The working part for this machine is knife tray( fix blades). High speed particles will be partly crushed after striking the tooth plate and tooth sheet then be absorbed by wind. The bigger powder will go on striking and then be crushed and absorbed. This is to reduce the burthen of the knife tray and improve the milling efficiency, then to make the powder cooled equably
• Low temperature is the advantage of this machine. This machine absorbs the wind outside and the wind power can reach 50m³/kw. The different temperature of wind in and out brings most of the heat. The rest heat is dealt by water cooling. Temperature of water in is less than 25℃ and water out is less than 45℃. In summer, water cooling should be increased to reduce the temperature.

PVC Pulverizer Machine​ Main technical parameter:

PVC Pulverizer Machine​

PVC Pulverizer Machine​ Terms & conditions

1. PVC Pulverizer Machine​ Training and services

1) Instruction of field installation

2) Equipment field debugging and trial run if required by the buyer according to the rule.

3) Training on field operation and maintenance for customer's personnel.

4) Provide technical consultation service on long-term basis.

2. PVC Pulverizer Machine​ Installation and debugging

When the machine arrives at site, the customer should install it on the appropriate position according to the specifications provided by the supplier; and then the supplier should send its engineers to the site if requirement approved,in order to instruct the customer about trial run and debugging. The customer should provide necessary conditions for trial run and provide materials for trial run, and should decide the processing conditions in trial run with consideration of the supplier's opinions.

1) The price covers the pre-commissioning of the machinery before shipment at Seller's site. The Seller is obliged to test the performance of machinery.

2) The Buyer is obliged to provide suitable space, tools and manpower for the commissioning of the order.

3) This Price does not included commission and installation in buyer’s factory.

3. PVC Pulverizer Machine​ Pricing

1) The above mentioned quotation is valid within 30 days counted from the issue date of quotation.

2) The price and machinery configuration should be updated and confirmed by the Seller in the case that the quotation has been beyond the validity period.

3) The above mentioned quotation is based on Ex works. Sea transportation and wooden case packing is excluded.

4) The price does not cover the cost of testing material. The testing material will be supplied by the Buyer. Or the Seller will purchase the material as requested by the Buyer at Buyer's cost.

5) The price does not include the cost of commissioning at Buyer's site.

The Seller reserves the right to modify the specification and design of the machine in order to enhance the product quality.

4. PVC Pulverizer Machine​ Terms of payment

1) T/T and L/C (irrevocable, at sight) both are acceptable.

2) 35% of the total contract value should be paid in advance, balance 65% of the total value is to be paid before shipping at the Seller’s factory.

5. PVC Pulverizer Machine​ Time of delivery

1) When the contract becomes valid, the machine should be delivered within 60 days since receipt of the advance payment. And the equipment will be in normal operation after debugging within two weeks after arrival.

2) During production, provided that the Buyer requests to modify the specification of the order, the Buyer shall notify the Seller of this modification in written form. Upon receipt of the notice, the Seller will quote to the Buyer the cost of this modification and notify the Buyer of any possible delay due to this modification.

6. PVC Pulverizer Machine​ Debugging charge

The buyer pays for the plane ticket of round-trip abroad and food and accommodation of buyer’s country during debugging. And the wage of technicians should be paid by the customer (80USD/day).

7. PVC Pulverizer Machine​ Guarantee clause

1) Guarantee is 1 year (excluding human factor and wearing parts).

2) Under proper working conditions, 12 months from the date of completion of commissioning at the buyer's site, and should be at the latest within 14 months from the issuing date of Bill of Lading.