PC200 PC200-8 PC220 PC300 PC450 Hydraulic Excavator Quick Coupler Excavator

Product Specification

PC200 PC200-8 PC220 PC300 PC450 Hydraulic Excavator quick Coupler Excavator quick Hitch Coupler quick Hitch Coupler Attachment

Product Parameter

Manual,Hydraulic,Double-lock Quick Couplers for Excavators
There are many variations in the design of quick couplers. The initial difference is between those that can pick up any of a range of attachments, such as buckets, by clamping onto the mounting pins for the attachment. These are known as pin grabbers or pin couplers. There is also a variation that works only with buckets and attachments designed to suit that particular quick coupler,also known as a dedicated coupler.
Huilian Machine quick couplers offer a dependable design for use with OEM configured attachments. No pin removal is needed for an easy exchange of a variety of attachments. One-man operation, allowing change of attachments from inside cab. Adjustable design allows the same coupler to fit many different machines in the same class. No special modifications needed for buckets/attachments.

Factory custom made high quality quick couplers / quick hitches for excavators / loaders
Features:
1. Patented design, compact size
2. Better steel to serve longer life
3. Machenic lock or hydraulic lock or hydraulic dual lock
4. Better shape, easier maintance

specification
1.High strength manganese steel ,structure integrated mechanical design, durable.
2.The pin shaft is made of alloy steel with high strength and good toughness.
3.The cylinder adopts quilted tube, imported oil seal, short working cycle and long life

Excavator Quick Hitch Coupler
Excavator quick coupler, also named as quick hitch coupler, quick hitch, can make bucket pin grabber connect various attachments such as bucket, hydraulic breaker, plate compactor, log grapple, ripper, etc. quickly on excavators.In this way excavator quick coupler can expand the application scope of excavators, save time and improve working efficiency.

Product Use Precautions:
Solenoid valve:
1. The solenoid valve pilot oil is connected to P port, and the return oil is connected to T;
2, sit in the cab to look ahead, B mouth is connected to the right mouth, A mouth is connected to the left mouth (the solenoid valve is not working when the quick change cylinder grip accessories, the solenoid valve is in the working state when the replacement accessories, if the solenoid valve is in the working state for a long time, it is easy to burn the solenoid valve coil). Switch:
1. When the switch is ON, it is energized, and the cylinder shrinks back at this time to facilitate the replacement of fittings.
2, when the switch is OFF, the power is off, and the cylinder is extended at this time, and the working state is. The solenoid valve must be firmly installed (can not be strapped, tied up in the air) the forearm iron pipe should be screwed into place at one time, and it should be frequently checked whether it is loose
Quick change must be installed safety pin, no standing within 10 meters (to prevent cylinder failure, accessories fall safety accidents)
The safety shall be installed on the positive electrode of the battery. (If the battery volt and the solenoid valve volt does not match, please consult the technical personnel, do not connect by yourself)
The line should be properly cleaned after installation - a small amount of oil can be drained to the outside for flushing.
Note: Please be sure to follow the above instructions to install the operation, improper installation will cause the machine oil circuit disorder, resulting in the phenomenon of stuck valve.
Special attention: how to identify whether the solenoid valve is in working state: the solenoid coil can hold the metal ( such as: wrench) when the solenoid valve is in working state. (Solenoid coil burn is not covered by warranty)
Good equipment by use, good equipment by maintenance!

FAQ

1. You are a trader or a manufacture?
We are an industry and trade integration business,
2. How can I be sure the product is right for my machine?
Please provide the part number of our product or the serial number of the machine. And we can customize for you according to drawings and sizes.
3. How to choose payment terms?
We usually accept T/T or Trade Assurance. other terms also could be negotiated.
4. What is your MOQ?
It depends on the product you ordered. We can LCL or 20ft container for you
5. What is your delivery time please?
If the goods are in stock, we can arrange delivery and transportation for you in 2-5 days. If it needs to be produced, it will take about 7-15 days.
6. How is the quality of the product?
We have a perfect quality system to produce perfect products. And we can provide customers with products suitable for customers according to their requirements.