Commercial 50W 2x4 LED Troffer Lights 3000-5000K 9600 Lumens

Product Specification

Troffer Light Led Light Manufacturer Commercial Troffer Led Panel 50w 2x4 OEM LED Light At 9600 Lumens

DESCRIPTION

The LED Magic Door Kit is typically used to retrofit 2x2 and 2x4 fluorescent troffers. The LED Magic Door Kits are designed to retrofit troffers in drop ceilings.The Door Kit utilizes an ultra modern design with an industry leading 140 lumens per watt.

INSTALLATION

1. Turn OFF power to the fixture at the breaker panel before installation.

2. Open the diffuser from the light fixture.

3. Remove the fluorescent tubes and dispose of these properly as they may contain mercury.

4. Remove the ballast cover and disconnect host fixture ballast from main.

5. Remove existing lamps, door frame (if applicable), reflector and ballast cover. Depending on clearance space, ballast may need to be removed.

6. Slide in both mounting brackets between the housing and the T-grid (A).

7.Hang the retrofit kit body by hooking the T-hinges into the slots and attach the safety cables to the opposing bracket (B).

8. Connect AC wires and/or dimming wires (C).

9. Close door kit pushing it up and securing the bracket with the latches. 10. Switch ON power to the fixture at the breaker panel.

The Guidance Steps

1. Click on the upper right corner “+”. 2. Find the security sensor, click: human sensor (Bluetooth). 3. Turn on and off the lamp twice in a row, and turn on the lamp for the third time. At this time the lamp enters the flash mode (software and lamp docking mode). 4. Click: Confirm that the indicator is flashing fast. 5. Click: add the lamps successfully as the picture showed. 6. After clicking the lamp, it appears: Picture 5 and Picture 6. 7. Humanized design: manual / induction.

If you want to turn on the fixture through detecting the human motion, please choose the “Sensor” model. And then you can set up the basic parameters to control the fixture you have connected. ON/OFF(motion sensor model) Three different detective distance for you to choose so that you can set the most suitable distance for you to save more energy for you. Three different detective light models for you to choose. when the light sensor detects the light, if the light being detected is weaker than the normal light in day, and if the PIR detects the motion, the fixture will light on. (the normal light is set) . So it is really important for you to choose the detecting light model because whether your PIR motion sensor can work depends on whether the light model allows it after detecting the light. Usually, please set up the light detective model according to the time you are in. Advice 1.If you want your PIR motion sensor only can works in the dark night, please choose the “Dark” 2.If you want your PIR motion sensor can work in the dark night and evening, please choose the “Evning” 3.If you want your PIR motion sensor can work whole day, please choose the “Day” After the PIR sensor can’t detect the motion,you can set the time of the full light duration according to your demand. If you want to add more the time of the light duration with weaker light after the motion can’t detected by the PIR sensor, you also can achieve it through the “slight bright” function. “slight bright” function. You can choose the prolonged light intensity here. “slight bright” function. You can choose the prolonged light time here.

FAQ

Q1. Can I have a sample order ?

Yes, we welcome sample order to test and check quality. Mixed samples are acceptable.
Q2. What about the lead time?
Sample needs 3-5 days, mass production time needs 1-2 weeks for order quantity
Q3: How to deal with the faulty?
Firstly, Our products are produced in strict quality control system and the defective rate will be less than 0.2%.
Secondly,during the guarantee period, we will send new lights with new order for small quantity. For defective batch products, we
will repair them and resend them to you or we can discuss the solution including re-call according to real situation.