Sinuo Testing Equipment Co. , Limited
| Payment Terms | T/T |
| Supply Ability | 1 sets/month |
| Delivery Time | 45 days |
| Packaging Details | Other |
| Effective volume | 18m³ |
| Cooling method | Water cooling |
| Inner box size | W3000 mm*H2000 mm*D3000mm |
| Outer box size | W3800 mm*H2530 mm*D3690 mm |
| Temperature range | 0°～ +100℃ |
| Humidity range | 20%-98%RH |
| Heating rate | 2～3℃/min |
| Cooling rate | 0.7～1℃/min |
| Brand Name | Sinuo |
| Model Number | SN886-18F |
| Certification | Calibration Certificate (Cost Additional) |
| Place of Origin | China |
View Detail Information
Explore similar products
Walk in Environmental Test Chamber IEC 60068 Temperature Humidity Chambers
Constant Temperature Humidity walk in environmental test chamber 13m3 less than
IEC60529 IP5/6X EV Charge Station Walk-In Sand & Dust Test Chamber
IEC 60068 Temperature Humidity Walk In Environmental Test Chambers
Product Specification
| Payment Terms | T/T | Supply Ability | 1 sets/month |
| Delivery Time | 45 days | Packaging Details | Other |
| Effective volume | 18m³ | Cooling method | Water cooling |
| Inner box size | W3000 mm*H2000 mm*D3000mm | Outer box size | W3800 mm*H2530 mm*D3690 mm |
| Temperature range | 0°～ +100℃ | Humidity range | 20%-98%RH |
| Heating rate | 2～3℃/min | Cooling rate | 0.7～1℃/min |
| Brand Name | Sinuo | Model Number | SN886-18F |
| Certification | Calibration Certificate (Cost Additional) | Place of Origin | China |
| High Light | Constant Temperature and Humidity Test Chamber ，IEC60068-2-30 Temperature And Humidity Test Chamber | ||
18m³ Walk-in Constant Temperature and Humidity Test Chamber IEC60068-2-30
Complied Standards & Clauses
Conforms to:
IEC60068-2-1:2007 “Environmental Testing-Part 2-1: Tests-Test A: Cold, IDT”
IEC60068-2-2:2007 “Environmental Testing-Part 2-1: Tests- Test B-Dry heat, IDT”
IEC60068-2-78:2012 “Environmental Testing-Part 2-78: Tests-Test Cab: Damp heat, steady state, IDT”
IEC60068-2-30:2005 “Environmental Testing-Part 2-30: Tests-Test Db: Damp heat, cyclic (12h+12h cycle), IDT”
Equipment Overview
The walk-in constant temperature and humidity test room is suitable for safety performance testing of electronic components, providing reliability testing, product screening testing, etc. At the same time, through this test, the reliability of the product is improved and the quality control of the product is carried out. The walk-in constant temperature and humidity laboratory is an essential test equipment in the fields of aviation, automobiles, home appliances, scientific research, etc. It assesses and determines the parameters and performance of electrical, electronic, semiconductor, communication, optoelectronics, electrical appliances, automotive electrical appliances, materials and other products after the temperature environment changes rapidly during high and low temperature and humidity tests, and the adaptability of use. It is suitable for schools, factories, military industry, research and development and other units.
Technical Parameters
| 1.Product name | Walk-in Constant Temperature and Humidity Test Chamber |
| Mode | SN886-18F |
| 2.Applicable instructions | |
| Applicable range | The walk-in constant temperature and humidity test room is suitable for safety performance testing of electronic components, providing reliability testing, product screening testing, etc. At the same time, through this test, the reliability of the product is improved and the quality control of the product is carried out. The walk-in constant temperature and humidity laboratory is an essential test equipment in the fields of aviation, automobiles, home appliances, scientific research, etc. It assesses and determines the parameters and performance of electrical, electronic, semiconductor, communication, optoelectronics, electrical appliances, automotive electrical appliances, materials and other products after the temperature environment changes rapidly during high and low temperature and humidity tests, and the adaptability of use. It is suitable for schools, factories, military industry, research and development and other units. |
| 3.Volume and size | |
| 3.1. Effective volume | 18m³ |
| 3.2. Inner box size | W3000 mm*H2000 mm*D3000mm |
| 3.3. Outer box size | About W3800 mm*H2530 mm*D3690 mm(Excluding unit size) |
| 4.Performance | |
| 4.1. Cooling method | Water cooling |
| 4.2. Temperature range | 0°～ +100℃ |
| 4.3. Humidity range | 20%-98%RH |
| 4.4. Heating rate | 0°～ +100℃ About 2～3℃/min (no load, average) |
| 4.5. Cooling rate | +100℃~0℃ About 0.7～1℃/min (no load, average) |
| 4.6. Analysis accuracy | 0.01℃ |
| 4.7. Temperature fluctuation | ±0.5℃ |
| 4.8. Temperature deviation | ±2.0℃ |
| 4.9. Humidity deviation | ≤±5.0%RH below 75%RH, ≤+2/-3%RH above 75%RH |
| 4.10. Humidity fluctuation | ≤±2.0%R.H |
| 4.11. Temperature and humidity control capability range diagram | |
| 4.12. Power supply | AC3￠5W 380V 50Hz (R, STN three-phase five-wire plus ground wire) (voltage fluctuation ≤±10%) |
| 4.14. Test standards | GB-2423.1-2008 (IEC68-2-1) Test A: Low temperature test method. GB-2423.2-2008 (IEC68-2-2) Test B: High temperature test method. GB2423.3-2008 (IEC68-2-3) Test Ca: Constant damp heat test method. GB2423.4-2008 (IEC68-2-30) Test Db: Alternating damp heat test method. GB 11158 "Technical Conditions of High Temperature Test Chamber" GB10586-1 "Technical Conditions of Humidity and Heat Test Chamber" |
| 4.15. Power | The total power of the equipment is about 25KW |
| 4.16 Noise | Measured according to GB/T14623-2008, noise ≤75dB (noise detection device is measured 1m away from the equipment door) |
| 4.17 Energy-saving design | The PLC (Programmable Logic Controller) of the control system automatically adjusts the operating conditions of the refrigerator according to the test conditions. The refrigeration system can adjust the power according to the load and has compressor energy adjustment technology, which can achieve excellent energy-saving effects. |
Company Details
Business Type:
Manufacturer
Year Established:
2019
Employee Number:
<100
Ecer Certification：
Verified Supplier
Sinuo Testing Equipment Co., Limited established in 2019, but Sinuo has rich experience in manufacturing test euipment, test system and offering overall laboratory construction of electronic and electrical products. Sinuo's main products include electrical vehicle te... Sinuo Testing Equipment Co., Limited established in 2019, but Sinuo has rich experience in manufacturing test euipment, test system and offering overall laboratory construction of electronic and electrical products. Sinuo's main products include electrical vehicle te...
Get in touch with us
Leave a Message, we will call you back quickly!