Sinuo Testing Equipment Co. , Limited
| Payment Terms | T/T |
| Supply Ability | 10 Sets Per Month |
| Delivery Time | 30 Days |
| Packaging Details | Export packing |
| Rain direction | 0-90° |
| Rain intensity | (12±1) mm/min |
| Nozzle pressure | 150kPa±10kPa |
| Rain time | 1～600 minutes |
| Rain test chamber inner frame dimensions | 7.4×3.4×3.1m (L*W*H) |
| Rain test chamber outer frame dimensions | 7.6×3.8×4.5m (L*W*H) |
| Preset rain time | 1～9999H59M59S |
| Maximum vehicle size | 2*1.5*1.6mm～6*2*2.1m (L*W*H) |
| Brand Name | Sinuo |
| Model Number | SNQC1001 |
| Certification | Calibration Certificate (Cost Additional) |
| Place of Origin | China |
View Detail Information
Explore similar products
DIN 75220 Electric Vehicle Solar Simulation Test Chamber Halogen Lamp Test
EV Electric Vehicle Testing Equipment Motor Vehicle Performance Test
EVSE Slow Fast Charging Electrical Safety Testing Equipment Power Battery REESS
DIN 75220 Electric Vehicle Testing Equipment Spectrum Solar Simulation Radiation
Product Specification
| Payment Terms | T/T | Supply Ability | 10 Sets Per Month |
| Delivery Time | 30 Days | Packaging Details | Export packing |
| Rain direction | 0-90° | Rain intensity | (12±1) mm/min |
| Nozzle pressure | 150kPa±10kPa | Rain time | 1～600 minutes |
| Rain test chamber inner frame dimensions | 7.4×3.4×3.1m (L*W*H) | Rain test chamber outer frame dimensions | 7.6×3.8×4.5m (L*W*H) |
| Preset rain time | 1～9999H59M59S | Maximum vehicle size | 2*1.5*1.6mm～6*2*2.1m (L*W*H) |
| Brand Name | Sinuo | Model Number | SNQC1001 |
| Certification | Calibration Certificate (Cost Additional) | Place of Origin | China |
| High Light | Outdoor Motor Vehicles Rain Test System ，Outdoor Motor Vehicles Dry Test System ，Dry Test System Rain Booth | ||
Water Booth Rain and Dry Test System for Outdoor Motor Vehicles
Complied Standards & Clauses
Conforms to QC/T476-2007 "Rainproof Sealing Limits and Test Methods for Passenger Vehicles" QC/T911-2013 Electric Energy Vehicles.
Product Overview
The purpose of this test room is mainly to test the ability of the tested product to prevent rainwater penetration under rain conditions and its rainproof performance during or after being rained. This test equipment is mainly used to assess whether the housing/seals of electrical and electronic products can ensure the good working performance and technical status of the equipment and components after or during the water test. At the same time, the product may be affected by water during transportation or use, providing a reference basis for product technical standards.
Technical Parameters
| Rain intensity | The front of the vehicle body (12±1) mm/min; the side, rear and top of the vehicle body (8±1) mm/min |
| Nozzle spray pressure | The commonly used water spray pressure is 50kpa, which is equal to 3mm/m³ rainfall, 100kpa, which is equal to 6mm/m³ rainfall, and 150kpa, which is equal to 8mm/m³ rainfall. The specific rainfall is subject to actual commissioning |
| Nozzle pressure | 150kPa±10kPa
|
| Rain direction | 0-90° (adjustable) |
| Rain time | 1～600 minutes or more can be set |
| Preset rain time | 1～9999H59M59S can be set |
| Pressure gauge | Install a pressure gauge at the outlet of the branch pipe of the water pump, and use a valve to adjust the pressure |
| Flow meter | Install a flow meter at the outlet of the branch pipe from the water pump |
| Maximum vehicle size |
|
| Rain test chamber inner frame dimensions | Approximately 7.4×3.4×3.1m (length×width×height) |
| Rain test chamber outer frame dimensions | Approximately 7.6×3.8×4.5m (length×width×height) |
| 1. The rainproof sealing test device of the car should ensure that the five surfaces of the car are sprayed from the top, left, right, front and rear directions to avoid dead corners of water spraying, and ensure that the water spraying pressure and flow rate correspond to the standard requirements of various parts of the vehicle. The frame structure of the rain chamber is simple and beautiful while ensuring rust prevention and shock prevention. The entire equipment is easy to operate and convenient for the inspection and maintenance of parts. |
| 2. The whole can accommodate the inspection of sample vehicle of different sizes at the same time. A spraying system is designed for different sizes of equipment. Each spraying system is equipped with a pressure gauge and a regulating valve to adjust the pressure to ensure uniform water spraying. The entire spraying line is 7.4 meters long. The full-spraying type is adopted. It adopts a profiling full spray type. The nozzles spray water on the vehicle body from five directions: both sides, front and rear, and top, avoiding dead corners of water spray and ensuring that the water spray pressure and flow intensity correspond to each part of the vehicle and meet the national standard requirements. |
| 3. The structure of the chamber body is designed to be rust-proof, shock-proof, and simple and beautiful at the same time. There are drainage channels at the bottom of the side of the chamber body to ensure no water seepage. |
Details
Company Details
Business Type:
Manufacturer
Year Established:
2019
Employee Number:
<100
Ecer Certification：
Verified Supplier
Sinuo Testing Equipment Co., Limited established in 2019, but Sinuo has rich experience in manufacturing test euipment, test system and offering overall laboratory construction of electronic and electrical products. Sinuo's main products include electrical vehicle te... Sinuo Testing Equipment Co., Limited established in 2019, but Sinuo has rich experience in manufacturing test euipment, test system and offering overall laboratory construction of electronic and electrical products. Sinuo's main products include electrical vehicle te...
Get in touch with us
Leave a Message, we will call you back quickly!