Sinuo Testing Equipment Co. , Limited
| Payment Terms | T/T |
| Supply Ability | 1 sets/month |
| Delivery Time | 45 days |
| Packaging Details | Other |
| Inner chamber dimensions | 800*1200*800 mm (W*H*D) |
| Outer chamber dimensions | 1080*2250*1850 mm (W*H*D) |
| Temperature Range | -40 °C ~+100°C |
| Humidity range | 20%～98%RH |
| Temperature fluctuation | ±0.5℃ |
| Temperature deviation | ≤±2.0℃ |
| Humidity Deviation | ≤±3% |
| Humidity fluctuation | ≤2.5% |
| Brand Name | Sinuo |
| Model Number | SN881-768L |
| Certification | Calibration Certificate (Cost Additional) |
| Place of Origin | China |
View Detail Information
Explore similar products
High And Low Temperature And Humidity Constant Climate Test Chamber
Environmental Testing Temperature And Humidity Chamber 408L
Environmental Testing Temperature And Humidity Chamber 1000L IEC60068-2-78
Temperature And Humidity Test Chamber Climate Testing For Electronics IEC60068-2
Product Specification
| Payment Terms | T/T | Supply Ability | 1 sets/month |
| Delivery Time | 45 days | Packaging Details | Other |
| Inner chamber dimensions | 800*1200*800 mm (W*H*D) | Outer chamber dimensions | 1080*2250*1850 mm (W*H*D) |
| Temperature Range | -40 °C ~+100°C | Humidity range | 20%～98%RH |
| Temperature fluctuation | ±0.5℃ | Temperature deviation | ≤±2.0℃ |
| Humidity Deviation | ≤±3% | Humidity fluctuation | ≤2.5% |
| Brand Name | Sinuo | Model Number | SN881-768L |
| Certification | Calibration Certificate (Cost Additional) | Place of Origin | China |
| High Light | Programmable Constant Temperature Humidity Test Chamber ，Programmable Temperature Humidity Test Chamber | ||
Programmable Constant Temperature and Humidity Test Chamber IEC60068-2-2
Complied Standards & Clauses
IEC60068-2-1:2007 “Environmental Testing-Part 2-1: Tests-Test A: Cold, IDT”
IEC60068-2-2:2007 “Environmental Testing-Part 2-1: Tests- Test B-Dry heat, IDT”
IEC60068-2-78:2012 “Environmental Testing-Part 2-78: Tests-Test Cab: Damp heat, steady state, IDT”
IEC60068-2-30:2005 “Environmental Testing-Part 2-30: Tests-Test Db: Damp heat, cyclic (12h+12h cycle), IDT”
Equipment Overview
This test chamber is used for cold, heat, humidity and dryness testing of raw materials and devices such as electronics, electricians, electrical appliances, plastics, etc. The purpose is to confirm the products reliability of storage and transportation under high and low temperature alternating heat and humidity.
Technical Parameters
| Technical Parameters | ||
| Control & Operation | PLC and touch screen intelligent control system | |
| Chamber Size
| Inner Size | External Size |
| 800*1200*800 mm (W*H*D) | 1080*2250*1850 mm (W*H*D) | |
| Temperature Range | -40 °C ~+100°C | |
| Humidity Range | 20%～98%RH | |
| Temperature fluctuation | ±0.5℃ | |
| Humidity fluctuation | ≤2.5% | |
| Temperature deviation | ≤±2.0℃ | |
| Humidity Deviation | ≤±3% | |
| Heating Rate | ≧2-3°C/min | |
| Cooling Rate | ≧1°C/min, average no load | |
| Load condition | None | |
| Working noise | A sound level≤70dB(A) (Measured in a soundproof room with an ambient temperature of 25°C and low echo. Using A weighting, test the average of 9 points. Each test point is 1 meter away from the noise source horizontally and 1 meter above the ground.) | |
| Temperature and Humidity Range Scheme | | |
| Program capacity and control functions | Available program groups: maximum to 120 PATTEN. Available memory capacity: total of 12000 SEGMENTS. Repeatable execution of commands: each command can be executed up to 3200 times. The program is created in a conversational manner, with functions such as editing, clearing, and inserting. SEGMENTS time setting 0~99Hour59Min. Programmable timing control module device x2 sets. With power-off program memory, automatic start and continuous program execution after power-on. With RS-485 or RS-232 communication interface. Graphic curves can be displayed in real time during program execution. With automatic adjustment of freezing capacity. With scheduled start and shutdown function. With date and time adjustment function. Key and screen lock (LOCK) function. | |
Company Details
Business Type:
Manufacturer
Year Established:
2019
Employee Number:
<100
Ecer Certification：
Verified Supplier
Sinuo Testing Equipment Co., Limited established in 2019, but Sinuo has rich experience in manufacturing test euipment, test system and offering overall laboratory construction of electronic and electrical products. Sinuo's main products include electrical vehicle te... Sinuo Testing Equipment Co., Limited established in 2019, but Sinuo has rich experience in manufacturing test euipment, test system and offering overall laboratory construction of electronic and electrical products. Sinuo's main products include electrical vehicle te...
Get in touch with us
Leave a Message, we will call you back quickly!