Sinuo Testing Equipment Co. , Limited
| Payment Terms | T/T |
| Supply Ability | 30 Sets / Month |
| Delivery Time | 15 days |
| Packaging Details | Export package |
| Applied Standards | IEC 62196-1, IEC60884 and etc. |
| Sample & Restriction | Multiple-position mobile sockets |
| Height of Dropping | 750mm |
| Two Ends Distance | 2250mm |
| Applied Clause | Ed.4CDV 2020 clause 26.3, fig 19 |
| Rotating Angle | 45°, it can be rotated in all sides |
| Dropping Method | Manual release |
| Dropping Times | 8 times |
| Brand Name | Sinuo |
| Model Number | SNQC1014 |
| Certification | Calibration Certificate (Cost Additional) |
| Place of Origin | China |
View Detail Information
Explore similar products
IEC62196 Electric Vehicle Connector Plug Drive Over Test Equipment 5000N
IEC62196 EV Connector Testing Equipment Plugs Temperature Rise Test System
EV Glow Wire Test Apparatus PLC Control IEC 62196 Glow Wire Test Equipment
IEC 62196 Electric Vehicle Air Saturated Test Chamber 304 Stainless Steel
Product Specification
| Payment Terms | T/T | Supply Ability | 30 Sets / Month |
| Delivery Time | 15 days | Packaging Details | Export package |
| Applied Standards | IEC 62196-1, IEC60884 and etc. | Sample & Restriction | Multiple-position mobile sockets |
| Height of Dropping | 750mm | Two Ends Distance | 2250mm |
| Applied Clause | Ed.4CDV 2020 clause 26.3, fig 19 | Rotating Angle | 45°, it can be rotated in all sides |
| Dropping Method | Manual release | Dropping Times | 8 times |
| Brand Name | Sinuo | Model Number | SNQC1014 |
| Certification | Calibration Certificate (Cost Additional) | Place of Origin | China |
| High Light | 2250mm EV Connector Testing Equipment ，50kg EV Connector Testing Equipment ，50kg ev test equipment | ||
IEC62196 New Energy Vehicle Multiple Portable Socket-Outlets Mechanical Strength Tester
Complied Standards & Clauses
IEC 62196-1Ed.4CDV: 2020 "Plugs, Socket - Outlets and Couplers for Industrial and Similar Applications, and For Electric Vehicles" clause 26.3, fig 19.
IEC60884-1:2006 "Plugs and socket-outlets for household and similar purposes- Part1:General requirements" clause 24.9 and figure 29.
GB2099.1-2008 "Plugs and socket-outlets for household and similar purposes- Part1:General requirements" clause 24.9 and figure 29.
Technical Parameters
| The Height of Dropping | 750mm |
| Distance from The Fixed End | 2250mm |
| Dropping Times | 8times |
| Rotating Angle | 45°, it can be rotated in all sides |
| Dropping Method | Manual release |
Equipment Overview
Samples and Restrictions: Multiple-position mobile sockets
Test Purpose: It is used to test the mechanical strength of rewirable plugs and vehicle connector which is equipped with flexible cable.
Test Principle: Fix the sample by a clamp at a height of 750mm from the ground to verify the mechanical strength
Structure: Outer size:about:2400×850×400(mm)W×D×H,equipment weight:50kg
Power supply:-,working temperature:0-40℃ humidity:30%-90%；
Questions & Answers
Q: What is the dropping height?
A: The dropping height is 750mm.
Q: What are the size for this device?
A: The size of the device is about 2400×850×400(mm)W×D×H. Weights 50kg.
Details:
For testing the mechanical strength of regenerable plugs and automotive connectors fitted with flexible cables.
The sample is held so that the cable is level and then allowed to fall on the concrete floor. This was done 8 times; the cable was rotated 45° each time it was fixed.
Renewable plugs and vehicle connectors are fitted with a small portion (about 200mm) of the lightest type of flex cable with the minimum cross-sectional area recommended by the manufacturer.
After testing, the samples shall show no damage as specified in IEC 62196-1Ed. 4 cdv 2020; In particular, no parts should come off or come loose. The sample should not expose parts that may be charged. Samples should maintain their IP rating.
Accessories with a degree of protection IP44 or higher should be subjected to the relevant tests specified in IEC 62196 - 1ed. 4CDV 2020 Clause 20.
Accessories with thermoplastic housings shall be tested to IEC62196-1ed. 4CDV 2020 Clause 21.4.
Company Details
Business Type:
Manufacturer
Year Established:
2019
Employee Number:
<100
Ecer Certification：
Verified Supplier
Sinuo Testing Equipment Co., Limited established in 2019, but Sinuo has rich experience in manufacturing test euipment, test system and offering overall laboratory construction of electronic and electrical products. Sinuo's main products include electrical vehicle te... Sinuo Testing Equipment Co., Limited established in 2019, but Sinuo has rich experience in manufacturing test euipment, test system and offering overall laboratory construction of electronic and electrical products. Sinuo's main products include electrical vehicle te...
Get in touch with us
Leave a Message, we will call you back quickly!