Sinuo Testing Equipment Co. , Limited
| Payment Terms | T/T |
| Supply Ability | 1 set/month |
| Delivery Time | 6 months |
| Packaging Details | Other |
| Test Sample | Automotive parts |
| Anechoic Chamber | 9.2* 6.2*6.2m |
| Control Room | 3.0*3.0*3.0m |
| Amplifier Room | 2.0 *3.0*3.0m |
| Conduction Emission | 150kHz-30MHz |
| Radiated Emission | 30MHz-6GHz |
| Conduction Emission Test Environment | Shielded room |
| Radiated Emission Test Environment | Shielded room |
| Brand Name | Sinuo |
| Model Number | SN661-EVESA |
| Certification | Calibration Certificate (Cost Additional) |
| Place of Origin | China |
View Detail Information
Explore similar products
DIN 75220 Electric Vehicle Solar Simulation Test Chamber Halogen Lamp Test
EV Electric Vehicle Testing Equipment Motor Vehicle Performance Test
EVSE Slow Fast Charging Electrical Safety Testing Equipment Power Battery REESS
DIN 75220 Electric Vehicle Testing Equipment Spectrum Solar Simulation Radiation
Product Specification
| Payment Terms | T/T | Supply Ability | 1 set/month |
| Delivery Time | 6 months | Packaging Details | Other |
| Test Sample | Automotive parts | Anechoic Chamber | 9.2* 6.2*6.2m |
| Control Room | 3.0*3.0*3.0m | Amplifier Room | 2.0 *3.0*3.0m |
| Conduction Emission | 150kHz-30MHz | Radiated Emission | 30MHz-6GHz |
| Conduction Emission Test Environment | Shielded room | Radiated Emission Test Environment | Shielded room |
| Brand Name | Sinuo | Model Number | SN661-EVESA |
| Certification | Calibration Certificate (Cost Additional) | Place of Origin | China |
| High Light | EMI emc test chamber ，EMS emc test chamber ，EMS emi test chamber | ||
EMC Test Solution for Automotive ESA Electric Vehicle Testing Equipment
Complied Standards & Clauses
UN ECE R10 "Uniform Provisions Concerning the Approval of Vehicles with Regard to Electromagnetic Compatibility"
EN 55025/CISPR 25 "Vehicles, boats and internal combustion engines- Radio disturbance characteristics- Limits and methods of measurement for the protection of on-board receivers"
CISPR 12 "Vehicles, boats and internal combustion engines - Radio disturbance characteristics - Limits and methods of measurement for the protection of off-board receivers"
ISO 11452 "Road vehicles-Component test methods for electrical dusturbances from narrowband radiated electromagnetic energy"
ISO 10605 "Road vehicles — Test methods for electrical disturbances from electrostatic discharge"
SAE J1113 "Electromagentic Compatibility Measurement Procedure and Limits for Vehicle Components (Except Aircraft) (60Hz to 18GHz)"
EN 50498 "Electromagnetic compatibility (EMC)-Product family standard for aftermarket electronic equipment in vehicles"
EN301489-1: "ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 1: Common technical requirements"
EN55032: " Electromagnetic compatibility of multimedia equipment - Emission requirements"
IEC 61000-3-2: "Electromagnetic compatibility limits for harmonic current emissions (equipment input current ≤16A)"
IEC 61000-3-3: "Electromagnetic compatibility limits the voltage variation produced with rated current ≤16A and unconditional access of the device in public low-voltage power supply system, voltage fluctuations and flicker limits"
......
System Overview
The whole test system includes EMI test project and EMS test project shown as following:
| Test items | Test content | Test site |
| Conduction Emission | 150kHz-30MHz, QP / AV | Shielded room |
| Radiated Emission | 30MHz-6GHz, QP / AV | Shielded room |
| Harmonic current emissions | According to IEC61000-3-2 | Ordinary laboratory |
| Voltage fluctuations and flicker | According to IEC61000-3-3 | Ordinary laboratory |
| Test items | Test content | Test site |
| ESD test | According to IEC61000-4-2 | Ordinary laboratory |
| EFT test | According to IEC61000-4-4 | Ordinary laboratory |
| Conducted RF immunity | According to IEC61000-4-6 | Shielded room |
| RF radiated immunity test | According to IEC61000-4-3 | chamber |
| Surge immunity test | According to IEC61000-4-5 | Ordinary laboratory |
| Voltage dips, short interruptions and voltage variations immunity | According to IEC61000-4-11 | Ordinary laboratory |
| ISO 7637 test Automotive Electronics Test Project (For Automotive parts) | According to ISO 7637 pulses 1, 2a, 2b, 3a, 3b, and 4 | Ordinary laboratory |
The system consists of an SAC, a control room and an amplifier room:
| NO. | Item | Specification (outer size) | QTY |
| 1 | Anechoic Chamber | 9.2 × 6.2× 6.2m (L × W × H) (Adjustment is according to the structural of the building, cost will be different) | 1 |
| 2 | Control Room | 3.0 × 3.0 × 3.0m (L × W × H) (Adjustment is according to the structural of the building, cost will be different) | 1 |
| 3 | Amplifier Room | 2.0 × 3.0 × 3.0m (L × W × H) (Adjustment is according to the structural of the building, cost will be different) | 1 |
Company Details
Business Type:
Manufacturer
Year Established:
2019
Employee Number:
<100
Ecer Certification：
Verified Supplier
Sinuo Testing Equipment Co., Limited established in 2019, but Sinuo has rich experience in manufacturing test euipment, test system and offering overall laboratory construction of electronic and electrical products. Sinuo's main products include electrical vehicle te... Sinuo Testing Equipment Co., Limited established in 2019, but Sinuo has rich experience in manufacturing test euipment, test system and offering overall laboratory construction of electronic and electrical products. Sinuo's main products include electrical vehicle te...
Get in touch with us
Leave a Message, we will call you back quickly!