Sinuo Testing Equipment Co. , Limited
| Payment Terms | T/T |
| Delivery Time | 30 days |
| Packaging Details | Plywood box |
| Supply Ability | 30 sets/month |
| Power Supply | Customized |
| Test Station | 2 stations |
| Swing Angle | -90~+90 degrees |
| Swing Speed | 1~20 times/min |
| Stretching Speed | 1.5m/s±50% adjustable |
| Test Times | 1~999999 times |
| Control Method | PLC & touch screen control |
| Drive Mode | Servo motor + reducer |
| Brand Name | Sinuo |
| Model Number | SNQC1019 |
| Certification | Calibration Certificate (Cost Additional) |
| Place of Origin | China |
View Detail Information
Explore similar products
IEC 61851 EVSE Testing Equipment Charging Station Waterproof Test Room
18m3 EVSE High Low Temperature Chamber IEC60068 For Electric Vehicle
Clause 16 EVSE Testing Equipment Electric Vehicle Marking Durability IEC 61851
EVSE Tracking Index Test Apparatus CTI PTI IEC 61851-1 PLC Control
Product Specification
| Payment Terms | T/T | Delivery Time | 30 days |
| Packaging Details | Plywood box | Supply Ability | 30 sets/month |
| Power Supply | Customized | Test Station | 2 stations |
| Swing Angle | -90~+90 degrees | Swing Speed | 1~20 times/min |
| Stretching Speed | 1.5m/s±50% adjustable | Test Times | 1~999999 times |
| Control Method | PLC & touch screen control | Drive Mode | Servo motor + reducer |
| Brand Name | Sinuo | Model Number | SNQC1019 |
| Certification | Calibration Certificate (Cost Additional) | Place of Origin | China |
| High Light | PLC Control EVSE Testing Equipment ，PLC EVSE Testing Equipment ，EVSE Tensile Rocking Life Test Equipment | ||
EVSE Cord Cantilever Tensile and Rocking Life Test Equipment PLC Control
Equipment Overview
The EVSE cord cantilever tensile and rocking life test device is a non-standard customized equipment. At the same time, it can also be tested to find out which parts of the sample are more likely to be damaged and whether the electric vehicle supply equipment is safety. It is a necessary durability test equipment for laboratory research and development.
The customized fixture of the equipment meets the clamping requirements of samples of different sizes and shapes, and simulates the real operation as much as possible to make cantilever stretching movements. Since the cantilever stretching and rebounding action is completed by a similar weight load, the cantilever stretching part only needs to make a stretching action, and then cooperate with the load to recover the wire rope.
The swing life tooling part is mainly used for the life test of the sample swinging from side to side. The machine is controlled by PLC & Touch screen. You can input the swing angle, speed and number of tests on the touch screen by yourself, and press to start the test. When the set number of times is reached, it will automatically stop with an audible alarm signal. The whole machine is beautiful in appearance and easy to operate. The sample holder can be adjusted up and down, which can adapt to the testing needs of different samples.
Technical Parameters
| Power supply | 220V/50hz |
| Test station | 2 stations: 1 station cantilever stretching, 1 station swing |
| Tooling information | The cable clamp can hold the charging gun cable with a diameter of 30~60mm |
| Swing angle | -90~+90 degrees |
| Swing speed | 1~20 times/min |
| Test times | 1~999999 times can be set |
| Control method | PLC & touch screen control |
| Drive mode | Servo motor + reducer |
| Stretching height stroke | 500~2000 (mm) |
| Stretching Speed | Speed 1.5m/s±50% adjustable (5-30 times/min adjustable) |
| Alarm method | Automatic alarm when the preset times are reached |
| Stretching uses a motor to drive a wire rope to stretch | |
| The height of the whole machine is about 2.5m, and it can adapt to samples below 2 meters in height. | |
Functional Introduction
1. Cantilever stretch:
Action: up and down;
Action stroke: 500~2000 (mm)
Rebound: automatic rebound
Speed: Speed 1.5m/s±50% adjustable (5-30 times/min adjustable)
The motor drives the wire rope to stretch.
2. Swing station:
Action: Swing left and right;
Swing angle: 0~±90 can be set;
Tooling height: 1500~2300 (mm) adjustable
Speed: Speed 1.5m/s±50% adjustable (5-30 times/min adjustable)
3. Schematic diagram of the action principle:
Company Details
Business Type:
Manufacturer
Year Established:
2019
Employee Number:
<100
Ecer Certification：
Verified Supplier
Sinuo Testing Equipment Co., Limited established in 2019, but Sinuo has rich experience in manufacturing test euipment, test system and offering overall laboratory construction of electronic and electrical products. Sinuo's main products include electrical vehicle te... Sinuo Testing Equipment Co., Limited established in 2019, but Sinuo has rich experience in manufacturing test euipment, test system and offering overall laboratory construction of electronic and electrical products. Sinuo's main products include electrical vehicle te...
Get in touch with us
Leave a Message, we will call you back quickly!