Sinuo Testing Equipment Co. , Limited
| Payment Terms | T/T |
| Delivery Time | 60 days |
| Supply Ability | 10 sets/month |
| Packaging Details | Plywood case |
| Applied Standard | IEC 60068-2-3, MIL-STD810D, etc. |
| Applied Samples | Electrical & electronic product screens |
| Temperature Range | Ambient temperature～80℃ |
| Temperature Uniformity | 50℃±2℃ and 60℃±3℃ |
| Temperature Rising Rate | From RT~60℃ within 15 minutes |
| Temperature Cooling Rate | From 60℃~RT within 15 minutes |
| Load Bearing for Single Foot | ≤1t/point |
| Load Bearing per Unit Area | ≤1t/m² |
| Brand Name | Sinuo |
| Model Number | SN8819 |
| Certification | Calibration Certificate (Cost Additional) |
| Place of Origin | China |
View Detail Information
Explore similar products
Kb Cyclic Corrosion Test Chamber IEC 60068-2-52 Salt Mist Test Chamber
VW80000 Environmental Test Chamber EV Electric Vehicle Components Tester
Environmental Temperature Humidity Vibration Climate Test Chamber IEC 60068
ISO 1431 Environmental Test Chamber Premium Ozone Aging Oven 400pphm
Product Specification
| Payment Terms | T/T | Delivery Time | 60 days |
| Supply Ability | 10 sets/month | Packaging Details | Plywood case |
| Applied Standard | IEC 60068-2-3, MIL-STD810D, etc. | Applied Samples | Electrical & electronic product screens |
| Temperature Range | Ambient temperature～80℃ | Temperature Uniformity | 50℃±2℃ and 60℃±3℃ |
| Temperature Rising Rate | From RT~60℃ within 15 minutes | Temperature Cooling Rate | From 60℃~RT within 15 minutes |
| Load Bearing for Single Foot | ≤1t/point | Load Bearing per Unit Area | ≤1t/m² |
| Brand Name | Sinuo | Model Number | SN8819 |
| Certification | Calibration Certificate (Cost Additional) | Place of Origin | China |
| High Light | IEC 60068-2-3 Environmental Test Chamber ，MIL-STD810D Environmental Test Chamber ，MIL-STD810D high temperature test equipment | ||
Screen High Temperature Aging Test Equipment
Complied Standards & Clauses
The Screen High Temperature Aging Test Equipment is designed and manufactured according to the standard requirements of IEC 60068-2-3,MIL-STD810D,MIL-STD810,MIL-STD883C,IEC 60068-2-1,IEC 60068-2-2,IEC 60068-2-14 and etc.
Equipment Overview
It is used to do the aging test the aging of screen under high temperature conditions. Adopting advanced and mature technology, this equipment has a reasonable structural design which can ensure the good dynamic quality of the system. The selected control system actuators have the advantages of high precision, good reliability, and fast response. This equipment is easy to use, operate and maintain. The whole machine runs stably and reliably.
Technical Parameters
| Whole Specification | Process flow | Loading→ turn on screen and confirmation →close door and heating → aging test→manual inspection → cooling and unloading. |
| Equipment error | The actual size of the overall equipment shape and the error of the design drawing ≤±5cm | |
| Basic Specification | Main unit size | 5600 * 3000* 2550mm (L*W*H) (Subject to the size of the drawing) |
| Trolley unit weight | ≤85KG | |
| Internal organization | The internal mechanism of the equipment must not cause damage to the supporting glass/product film material. | |
| Operating temperature range | Ambient temperature～80℃ (full load operation state) | |
| Temperature accuracy | ±0.5℃ | |
| Temperature uniformity | 50℃±2℃, (when in no load) | |
| 60℃±3℃, (when in no load) | ||
| Maximum temperature outside the furnace | ≤30℃ | |
| The time of temperature rising/cooling | The room temperature rises to 80℃ within 30 minutes (in full load operation state) | |
| The room temperature rises to the working temperature (60℃) within 15 minutes | ||
| Working temperature (60℃) to (room temperature +10℃) within 15 minutes | ||
| After the temperature rising is over, the temperature uniformity reaches the requirement within 10 minutes (no load). | ||
| Equipment structure | The equipment is spliced and combined by 4 independent cavities, each cavity contains a temperature control system, and the equipment is equipped with 4 transfer trolleys (subject to the dimension drawings provided by the buyer for reference); Single internal chamber size: 4200*600*1600mm(L*W*H), external chamber dimensions refer to drawings. | |
| Load bearing | Load bearing for single foot: ≤1t/point. | |
| Load-bearing per unit area: ≤1t/m² | ||
| Noise | Working noise in 500mm area outside the equipment: ≤75dB. | |
| Bottom pulley | There must be a pulley at the bottom | |
| Controller | Operation control panel height | 1500mm±80mm |
| Controller function | Temperature alarm, over-temperature control; The time setting of temperature sequence: programmable setting temperature, setting temperature aging time, and setting temperature rise curve | |
| Temperature control unit | Temperature recorder. Temperature recording point (10), which can monitor temperature in real time | |
|
Operation Interface | English interface, with three levels of operation authority | |
| The software has a warning reminder, and there will be a warning when the actual process parameters exceed the set range | ||
| The software needs to have an internal interlocking mechanism | ||
| The software can set the temperature rise curve, and the time and temperature can be adjusted | ||
| When the furnace body is heated up and the temperature uniformity reaches the requirements, the furnace body will alarm and the personnel will be reminded to inspect | ||
| When the furnace body test is done, it will automatically cool down. When the temperature drops to the set value, it will alarm and keep the screen light | ||
| Equipment material | Chamber material | Internal chamber: 304 stainless-steel, thickness is 0.8mm. |
| External chamber: A3 board with stoving varnish, thickness is 1.2mm. | ||
| Heat insulation material: glass wool/foam material; thickness ≥50mm | ||
| Safety system | Safety protection function | Main power supply overload protection, abnormal motor connection protection, overheat protection, motor overload protection, relay overheat protection sensor, smoke alarm |
| Safety specification | The door position of the equipment is sensed during processing; there has an observation window on the front of the equipment | |
| There is an alarm function when the equipment door is opened during operation | ||
| The equipment is equipped with emergency stop switch and electrical fireproof materials. | ||
| The equipment has a pause switch: when the pause switch is pressed, the mechanical action stops and alarms; when the pause switch is released, the mechanical action returns to origin. | ||
| There has the PG aisle door in the middle, the light is on when the door opens to inside, and the light is off when door closes to inside | ||
| Each unit must have an air switch; when any button is pressed, the power supply of the related equipment must be turned off by circuit breaker. | ||
Company Details
Business Type:
Manufacturer
Year Established:
2019
Employee Number:
<100
Ecer Certification：
Verified Supplier
Sinuo Testing Equipment Co., Limited established in 2019, but Sinuo has rich experience in manufacturing test euipment, test system and offering overall laboratory construction of electronic and electrical products. Sinuo's main products include electrical vehicle te... Sinuo Testing Equipment Co., Limited established in 2019, but Sinuo has rich experience in manufacturing test euipment, test system and offering overall laboratory construction of electronic and electrical products. Sinuo's main products include electrical vehicle te...
Get in touch with us
Leave a Message, we will call you back quickly!