Sinuo Testing Equipment Co. , Limited
| Payment Terms | T/T |
| Supply Ability | 30 sets/month |
| Delivery Time | 30 days |
| Packaging Details | Plywood Case |
| Applied Standard | IEC 60335 and etc. |
| Drive Mode | Manual booster pump drive |
| Test Stastion | Single station |
| Operation Method | Manually operation |
| Control Method | Manually control |
| Test Time | 0-999999s, Can be set |
| Sealing Joint | Φ2.85±0.05mm |
| Test Medium | Gas |
| Test Pressure | 0.01-2.5MPa |
| Gas Capacity | 10-100ml |
| Brand Name | Sinuo |
| Model Number | SN1123B |
| Certification | Calibration Certificate (Cost Additional) |
| Place of Origin | China |
View Detail Information
Explore similar products
EV Lithium Ion Battery Testing Equipment UL 2580 Cell Vibration Testing
1000A EV Battery Testing Equipment UL2580 Cells External Short Circuit Testing
Lithium Ion Cells Thermal Abuse Heating Oven EV Battery Testing Equipment UL2580
IEC 62133 EV Battery Testing Equipment UL2580 RESS 100kN Crush Testing Equipment
Product Specification
| Payment Terms | T/T | Supply Ability | 30 sets/month |
| Delivery Time | 30 days | Packaging Details | Plywood Case |
| Applied Standard | IEC 60335 and etc. | Drive Mode | Manual booster pump drive |
| Test Stastion | Single station | Operation Method | Manually operation |
| Control Method | Manually control | Test Time | 0-999999s, Can be set |
| Sealing Joint | Φ2.85±0.05mm | Test Medium | Gas |
| Test Pressure | 0.01-2.5MPa | Gas Capacity | 10-100ml |
| Brand Name | Sinuo | Model Number | SN1123B |
| Certification | Calibration Certificate (Cost Additional) | Place of Origin | China |
| High Light | Battery Enclosure Pressure Manual Test System ，Vehicle Battery Pressure Manual Test System | ||
Electric Vehicle Battery Enclosure Pressure Manual Test System
Complied Standards & Clauses of Electric Vehicle Battery Enclosure Pressure Manual Test System
This device complies with the standard IEC 60335-1: 2020-Annex BB-20.1.
Equipment Overview of Electric Vehicle Battery Enclosure Pressure Manual Test System
Samples and Limits: This device can test monolithic batteries containing chemistry using metal ions of electric vehicle.
A monolithic battery with metal ion chemistry is used in the test to measure the pressure that is applied to the appliance's shell when the battery vents as a result of a problem. to assess the battery's case's casing strength.
Test Principle: Increase the pressure using a booster pump, watch the pipeline-connected pressure sensor, and immediately report the pressure measurement. To make the sample's initial pressure approach 2070 kPa 10%, the control system regulates elements like electric valves and pressure regulating valves. Then use an aperture with a diameter of 2.85±0.05mm to push the standard amount of air through the mechanism. Within 30 seconds, it falls to 70 kPa.
Technical Parameters of Electric Vehicle Battery Enclosure Pressure Manual Test System
| Model | SN1123B |
| Station | Single station |
| Electrical control method | Manually control |
| Drive mode | Manual booster pump drive |
| Test medium | Gas |
| Test pressure | 0.01-2.5MPa, pressure sensor monitoring |
| Gas filling capacity | 10-100ml adjustable, achievable (20, 30, 50, 100ml)
|
| Test time | 0-999999s, Can be set |
| Sealing joint | One set as standard, orifice Φ2.85±0.05mm |
| Test procedure | Manual loading and unloading test, fully automatic testing process |
| Device dimensions and weight | L*W*H=700×500×500 (mm), weight about: 100kg |
| Use environment | Atmospheric pressure 80~106kpa; ambient temperature 5~40°C; relative humidity (20~80)%RH; place of use: no violent shaking, vibration, no electromagnetic interference, no dust, no explosive and corrosive gases, good heat dissipation |
Structure of Electric Vehicle Battery Enclosure Pressure Manual Test System
The equipment adopts manual pressure pump control, can read the pressure value, can be set to increase the gas capacity, adjustable test pressure, test time, etc.; It uses the manual pressure pump and its pressure control device stable performance, easy to operate, beautiful appearance, set a number of similar products at home and abroad, is the first choice of large domestic measurement institutions and laboratories.
Company Details
Business Type:
Manufacturer
Year Established:
2019
Employee Number:
<100
Ecer Certification：
Verified Supplier
Sinuo Testing Equipment Co., Limited established in 2019, but Sinuo has rich experience in manufacturing test euipment, test system and offering overall laboratory construction of electronic and electrical products. Sinuo's main products include electrical vehicle te... Sinuo Testing Equipment Co., Limited established in 2019, but Sinuo has rich experience in manufacturing test euipment, test system and offering overall laboratory construction of electronic and electrical products. Sinuo's main products include electrical vehicle te...
Get in touch with us
Leave a Message, we will call you back quickly!