Sinuo Testing Equipment Co. , Limited
| Payment Terms | T/T |
| Supply Ability | 30 sets/month |
| Delivery Time | 30 days |
| Packaging Details | Plywood Case |
| Applied Standard | IEC 60335 and etc. |
| Test Stastion | Single station |
| Operation Method | Touch screen operation |
| Drive Mode | Booster pump drive |
| Control Method | PLC control |
| Test Medium | Gas |
| Test Pressure | 0.01-2.5MPa |
| Gas Capacity | 10-100ml |
| Test Time | 0-999999s, Can be set |
| Sealing Joint | Φ2.85±0.05mm |
| Brand Name | Sinuo |
| Model Number | SN1123A |
| Certification | Calibration Certificate (Cost Additional) |
| Place of Origin | China |
View Detail Information
Explore similar products
EV Lithium Ion Battery Testing Equipment UL 2580 Cell Vibration Testing
1000A EV Battery Testing Equipment UL2580 Cells External Short Circuit Testing
Lithium Ion Cells Thermal Abuse Heating Oven EV Battery Testing Equipment UL2580
IEC 62133 EV Battery Testing Equipment UL2580 RESS 100kN Crush Testing Equipment
Product Specification
| Payment Terms | T/T | Supply Ability | 30 sets/month |
| Delivery Time | 30 days | Packaging Details | Plywood Case |
| Applied Standard | IEC 60335 and etc. | Test Stastion | Single station |
| Operation Method | Touch screen operation | Drive Mode | Booster pump drive |
| Control Method | PLC control | Test Medium | Gas |
| Test Pressure | 0.01-2.5MPa | Gas Capacity | 10-100ml |
| Test Time | 0-999999s, Can be set | Sealing Joint | Φ2.85±0.05mm |
| Brand Name | Sinuo | Model Number | SN1123A |
| Certification | Calibration Certificate (Cost Additional) | Place of Origin | China |
| High Light | Battery Enclosure Pressure Automatic Test System ，PLC Control Automatic Test System | ||
Electric Vehicle Battery Enclosure Pressure Automatic Test System
Complied Standards & Clauses of Electric Vehicle Battery Enclosure Pressure Automatic Test System
This device complies with the standard IEC 60335-1: 2020-Annex BB-20.1.
Equipment Overview of Electric Vehicle Battery Enclosure Pressure Automatic Test System
Samples and Limits: This device can test monolithic batteries containing chemistry using metal ions.
Test purpose: It is used to measure the pressure that the enclosure of a battery-operated appliance containing a monolithic battery using metal ion chemistry is subjected to when the battery vents during a fault. To verify the case strength of the case on the battery.
Test Principle: Use the booster pump to boost the pressure, monitor the pressure sensor connected to the pipeline, and feed back the pressure value in real time. The control system controls components such as electric valves and pressure regulating valves to make the initial pressure of the sample reach 2070kPa±10%. Then inject the air volume required by the standard from the orifice with a diameter of 2.85±0.05mm through the mechanism. Then it drops below 70kPa within 30s.
Technical Parameters of Electric Vehicle Battery Enclosure Pressure Automatic Test System
| Model | SN1123A |
| Station | Single station |
| Electrical control method | PLC control, touch screen operation |
| Drive mode | Booster pump drive |
| Test medium | Gas |
| Test pressure | 0.01-2.5MPa, pressure sensor monitoring |
| Gas filling capacity | 10-100ml adjustable, achievable (20, 30, 50, 100ml)
|
| Test time | 0-999999s, Can be set |
| Sealing joint | One set as standard, orifice Φ2.85±0.05mm |
| Test procedure | Manual loading and unloading test, fully automatic testing process |
| Device dimensions and weight | L*W*H=1000*750*900, weight about 110KG |
| Use environment | Atmospheric pressure 80~106kpa; ambient temperature 5~40°C; relative humidity (20~80)%RH; place of use: no violent shaking, vibration, no electromagnetic interference, no dust, no explosive and corrosive gases, good heat dissipation |
| Reference graph | |
Structure of Electric Vehicle Battery Enclosure Pressure Automatic Test System
The device adopts a box structure and is controlled by a touch screen. You can read the pressure curve display, you can set the increased gas capacity, you can set the test pressure, test time, etc. It adopts a pneumatic booster pump and its pressure control device with stable performance, convenient operation and beautiful appearance. Integrating the advantages of many similar products at home and abroad, it is the first choice of major domestic measurement institutions and laboratories.
Company Details
Business Type:
Manufacturer
Year Established:
2019
Employee Number:
<100
Ecer Certification：
Verified Supplier
Sinuo Testing Equipment Co., Limited established in 2019, but Sinuo has rich experience in manufacturing test euipment, test system and offering overall laboratory construction of electronic and electrical products. Sinuo's main products include electrical vehicle te... Sinuo Testing Equipment Co., Limited established in 2019, but Sinuo has rich experience in manufacturing test euipment, test system and offering overall laboratory construction of electronic and electrical products. Sinuo's main products include electrical vehicle te...
Get in touch with us
Leave a Message, we will call you back quickly!