JIANGYIN TOPSUN TECH CO., LTD
| Product Name | EVSE Charger |
| OCPP protocol | 1.6 or 2.0.1 |
| Charging Standards | IEC 62196-2, SAE J1772 |
| Cable Length | 5m or custom length |
| Operating Temperature | -30 ℃ To 55 ℃ |
| IP | IP65 |
| Function | Voltage Monitoring, temperature monitoring, LCD SCREEN, AUTOMATICAL REPAIR, leakage protection |
| Charging Standard | level 1 level 2 level 3 |
View Detail Information
Explore similar products
3.5KW 7KW Type 2 Electric Hybrid Charging Point At Home Wall Mounted
13A 3 Phase Car EV Charger IEC 62196 10A Level 2 Electric Vehicle 1415V
Type 2 22KW 11KW OCPP Car EV Charger Level 2 At Home Charging Station
Type1 J1772 Level 2 Car EV Charger Electric Car Plug For Home OCPP 1.6J
Product Specification
| Product Name | EVSE Charger | OCPP protocol | 1.6 or 2.0.1 |
| Charging Standards | IEC 62196-2, SAE J1772 | Cable Length | 5m or custom length |
| Operating Temperature | -30 ℃ To 55 ℃ | IP | IP65 |
| Function | Voltage Monitoring, temperature monitoring, LCD SCREEN, AUTOMATICAL REPAIR, leakage protection | Charging Standard | level 1 level 2 level 3 |
| High Light | OCPP 2.0.1 domestic electric car charging point ，domestic electric car charging point ，electric car charger 7kw SAE J1772 | ||
J1772 EVSE Type1 Level 2 Station EV Wall Box Charger For Leaf Charging
✔ Press the E-stop button to stop operation at any moment, especially in the event of a malfunction.
|
Power Specification
|
||||
|
AC Power Input Rating
|
SAE Standard
|
IEC Standard
|
||
|
AC Level 2
|
1-Phase
|
3-Phase
|
||
|
240V
|
220V ± 15%
|
380V ± 15%
|
||
|
AC Power Output Rating
|
3.5kW/16A
|
3.5kW/16A
|
11kW/16A
|
|
|
7kW/32A
|
7kW/32A
|
22kW/32A
|
||
|
10kW/40A
|
N/A
|
43kW/63A
|
||
|
Rated Frequency
|
50/60Hz
|
50/60Hz
|
50/60Hz
|
|
|
Connector Type
|
SAE J1772 (Type 1)
|
IEC 62196-2 (Type 2)
|
||
|
User Interface & Control
|
||||
|
Charging Control
|
Plug and Play, RFID Card or App
|
|||
|
Display Screen
|
4.3-inch LCD Screen
|
|||
|
Voice Prompt (Optional)
|
Voice guide of the charging process in English
|
|||
|
Indicators
|
4 LED indicators-Power/Connect/Charging/Fault
|
|||
|
External Communication
|
LAN (RJ-45) and Wi-Fi
|
|||
|
OCPP Protocol (Optional)
|
1.6 or 2.0.1
|
|||
|
Environmental
|
||||
|
Storage Temperature
|
-40 to 75℃ (-40 to 167℉) ambient
|
|||
|
Operating Temperature
|
-30 to 55℃ (-22 to 131℉) ambient
|
|||
|
Operating Humidity
|
Up to 95% non-condensing
|
|||
|
Altitude
|
≤2000m
|
|||
|
Protection
|
||||
|
Protection Ratings
|
IP 65
|
RCD
|
Type A / Type B
|
|
|
Over Voltage Protection
|
Yes
|
Under Voltage Protection
|
Yes
|
|
|
Over Load Protection
|
Yes
|
Short Circuit Protection
|
Yes
|
|
|
Earth Leakage Protection
|
Yes
|
Ground Protection
|
Yes
|
|
|
Over-temp Protection
|
Yes
|
Surge Protection
|
Yes
|
|
|
Wallbox Mechanical
|
||||
|
Dimension (H x W x D, mm)
|
410 x 260 x 164
|
|||
|
Weight
|
1-phase＜10kg; 3-phase＜12kg
|
|||
|
Charging Cable Length
|
5m or Customize Length
|
|||
|
Enclosure Material
|
Front-Panel: Tempered Glass; Back-cover: Metal Plate
|
|||
|
Mounting Pole Mechanical (Optional)
|
||||
|
Dimension (H x W x D, mm)
|
1400 x 200 x 100
|
|||
|
Weight
|
＜8kg
|
|||
|
Enclosure Material
|
Metal
|
|||
Attention to know
EV chargers are splash, water and dust resistant and have been tested under strictly controlled laboratory
conditions to achieve an IP65 rating in accordance with IEC standard 62196. However, the resistance to splashes, water and dust is not permanent and may weaken over time under normal use. Damage caused by liquids is not covered by the warranty.
To prevent damage to your charger from liquids, please avoid the following situations :
1. Exposing the charger to pressurised water or high velocity water flow.
2. Intentionally submerging the charger in water.
3.Operating the charger beyond the recommended temperature range or in extremely humid environments
4. Dropping the charger or subjecting it to other shocks.
5. Disassemble the charger, including removing the screws.
If the charger comes into contact with liquid, turn off all power until it is completely dry.
Placing the unit in front of a fan so that cold air is blowing directly on the charging connector may help to speed up the drying process.
Do not use an external heat source to dry the charger, or insert foreign objects such as cotton swabs or paper towels into the charging port.
Company Details
Business Type:
Manufacturer,Seller
Employee Number:
>100
Ecer Certification：
Active Member
JIANGYIN TOPSUN TECH CO.,LTD is the leading company in charging technology&service of ecletric vehicles area in China, committed to provide customers with stable and reliable products. Until now we have series of products: EV Charger Cable , EV Charger , EV Car Charging Station, EV Charging Conn... JIANGYIN TOPSUN TECH CO.,LTD is the leading company in charging technology&service of ecletric vehicles area in China, committed to provide customers with stable and reliable products. Until now we have series of products: EV Charger Cable , EV Charger , EV Car Charging Station, EV Charging Conn...
Get in touch with us
Leave a Message, we will call you back quickly!