Shenzhen Topmay Electronic Co., Ltd.
| Payment Terms | T/T |
| Supply Ability | 1000000pcs per month |
| Delivery Time | 12~15 working days |
| Packaging Details | Bulk, Tape |
| Material | Y5V |
| Capacitance | 2.2nF |
| Voltage | X1 400VAC Y1 400VAC |
| Pitch | 10mm |
| Color | Blue |
| Operating Temperature | –25℃～+85℃ |
| Brand Name | ETOPMAY |
| Model Number | TMCC02 |
| Certification | SGS( RoHS) |
| Place of Origin | China |
View Detail Information
Explore similar products
Low Frequency Radial Ceramic Disc Capacitor 100nF 100V P2.54mm
Radial Single Layer Ceramic Disc Capacitor 10pF 15pF 22pF 33pF 50V
15KV 25KV High Voltage Capacitors Blue Epoxy Coating 220pf Ceramic Capacitor Y5T
CCGS Water Cooled High Power Ceramic Capacitor 5000pF 20KV For Electric Oven
Product Specification
| Payment Terms | T/T | Supply Ability | 1000000pcs per month |
| Delivery Time | 12~15 working days | Packaging Details | Bulk, Tape |
| Material | Y5V | Capacitance | 2.2nF |
| Voltage | X1 400VAC Y1 400VAC | Pitch | 10mm |
| Color | Blue | Operating Temperature | –25℃～+85℃ |
| Brand Name | ETOPMAY | Model Number | TMCC02 |
| Certification | SGS( RoHS) | Place of Origin | China |
| High Light | Safety Ceramic Disc Capacitor ，2.2nF Ceramic Disc Capacitor ，2.2nF Ceramic Capacitor | ||
Safety Ceramic Disc Capacitor X1 Y1 2.2nF 400VAC P10mm Y5V For Power Filter
Specifications
B: Y5P E: Y5U F: Y5V
Dimensions (mm)
| D±1.0 | T±1.0 | L min | F±0.8 | φ±0.05 | c Max |
| 7.0 | 4.0 | 20.0 | 10.0 | 0.6 | 2.0 |
Test Condition
Test must be in the standard condition( Temperature 15～30℃, Relative humidity 45～75%, air pressure 86～106Kpa)
Unless otherwise specified, capacitance must be under base conditions in case of doubt of measurement results and special requirements (Temperature 25±2℃, Relative humidity 60～70%, air pressure 86～106Kpa). Apply to X1Y1 and X1Y2.
| No. | Item | Standard | Test Condition | |||||||||||||||||||||||||||
| 1 | Appearance and size | There is no obvious defect in appearance shape, the size is within the standard range | Capacitance must be visually checked for obvious defects. Dimensions are measured with vernier calipers. | |||||||||||||||||||||||||||
| 2 | Printing | Clear and could be recognized. | Visual Check. | |||||||||||||||||||||||||||
| 3 | Capacitance | Within the specified tolerance range | Capacitance and Dissipation factor must be tested under the temperature 20℃, and 11KHz, 1±0.1V | |||||||||||||||||||||||||||
| 4 | (D.F.) Dissipation Factor | ≤200×10-4 | ||||||||||||||||||||||||||||
| 5 | (I.R.) Insulation Resistance | ≥10000MΩ | Insulation resistance must be tested after charging 60±5 seconds under voltage 500±50V. | |||||||||||||||||||||||||||
| 6 | Dielectric strength | Between two terminals | There is no breakdown or arc. | (The charge and discharge current is not greater than 50mA) The capacitor is added voltage in the below table, after 60s, there is no damage, <Table 1>
| ||||||||||||||||||||||||||
| The body insulation | There is no breakdown or arc. | First, the terminals of the capacitor are twisted together, and then, as shown in the figure on the right, the metal foil is wrapped around the capacitor's body 3-4mm away from the terminal. Then, the capacitor is inserted into the container holding a metal ball with a diameter of 1mm. Finally, the AC voltage as shown in table 2 is applied for 60 seconds. <Table 2>
| ||||||||||||||||||||||||||||
| 7 | Temperature Characteristics |
Temperature Range: -25 ～ +125℃ | The capacitor must be tested under temperature as below Table 3 <Table 3>
| |||||||||||||||||||||||||||
| 8 | Resistance to soldering heat | Appearance | No damage | The conductor of the capacitor must be immersed in the solder for 5 + / -0.5 seconds. Dip depth 2.5 mm from wire root. Soldering temperature: 250±5℃ 24±2hrs later, make testing.
| ||||||||||||||||||||||||||
| Capacitance change rate | ΔC/C≤10% | |||||||||||||||||||||||||||||
| 9 | Vibration resistance | Appearance No damage | Frequency 10~500Hz, total amplitude to 0.75mm, time 6hrs | |||||||||||||||||||||||||||
| 10 | Humidity | Appearance | No damage | The time was 500+24- 0h, the temperature was 40±2℃ and the temperature was 90 ~ 95%. After the test was completed, the temperature was restored to 24±2h at room temperature. | ||||||||||||||||||||||||||
| Capacitance change rate | ΔC/C≤15% | |||||||||||||||||||||||||||||
| I.R. Insulation Resistance | ≥3000MΩ | |||||||||||||||||||||||||||||
| Loss Tangent | △tanδ≤80×10-4 | |||||||||||||||||||||||||||||
| 11 | Durability | Appearance | No damage | The temperature was 85±2℃, the duration was 1000h and the rated voltage was 1.7 times. After the test, the temperature was restored to 24±1h
| ||||||||||||||||||||||||||
| Capacitance change rate | ≤20% | |||||||||||||||||||||||||||||
| I.R. Insulation Resistance | ≥3000MΩ | |||||||||||||||||||||||||||||
| Loss Tangent | △tanδ≤80×10-4 | |||||||||||||||||||||||||||||
| 12 | Lead Weldability | Wet lead solder, free flow to indicate good tin coating | After the capacitor leads are immersed in 25% alcohol rosin solution, they are immersed in solder with melting temperature of 235±5℃ and 2± 0.5s into the depth of 2 ~ 2.5mm away from the porcelain body. | |||||||||||||||||||||||||||
| 13 | Flame retardant test | Apply flame duration 30S, residual flame duration ≤10S. | Apply flame duration 30S, residual flame duration ≤10S. | |||||||||||||||||||||||||||
| 14 | Impulse test | The capacitor shall have no failure | Add the capacitor to the pulse voltage y1:8kvdc and y2:5kvdc, and make 24 pulses of the same polarity, at a time interval of not less than 10S | |||||||||||||||||||||||||||
Our series of strong products of capacitors and resistors can be divided into below types:
★ Ceramic Disc Capacitor( low and high voltage, Y1/Y2 safety )
★ Multilayer Ceramic Capacitor( radial, axial and SMD )
★ Film Capacitor( Mylar, MKT, MKP, X2, CBB60, CBB61, CBB65, CL21-Box, CBB-BOX, CL20, CBB20, CBB81, etc. )
★ Aluminum Electrolytic Capacitor(SMD, Radial , Axial, Snap-in , Screw Terminal, etc. )
★ Tantalum Capacitor(SMD, Radial , Axial )
★ Super Capacitor( Coin Type, Cylindrical Type, Module Type)
★ Mica Capacitor
★ Trimmer Capacitor
★ SMD Resistors
★DIP TYPE Resistors( KNP, CF, MF, MOF, ect,)
★ Cement Resistors
★ Leadless Resistors( MLEF)
★Power Resistor
Any more details, kindly contact us freely!
Company Details
Business Type:
Manufacturer,Exporter,Trading Company
Year Established:
1998
Total Annual:
2.5 Million -5 Million
Employee Number:
400~500
Ecer Certification：
Active Member
Shenzhen Topmay Electronic Co., Ltd is specialized in manufacturing a wide range of capacitors and resistors. The company headquarter is located in Shenzhen, a flourishing southern city that is recognized as one of the economic centers of China. Since established in... Shenzhen Topmay Electronic Co., Ltd is specialized in manufacturing a wide range of capacitors and resistors. The company headquarter is located in Shenzhen, a flourishing southern city that is recognized as one of the economic centers of China. Since established in...
Get in touch with us
Leave a Message, we will call you back quickly!