Guangdong Bell Experiment Equipment Co., Ltd
| Payment Terms | Western Union, T/T, D/P, D/A, L/C |
| Supply Ability | 500 Sets per Month |
| Delivery Time | Negotiation |
| Packaging Details | Each set protected with resin fiber and PP film, then put into Strong wooden case with operation manual inside. |
| Keywords | Climatic Test Chamber for Battery Cell |
| Power Supply | AC 380V 50HZ |
| Temperature Range | -40ºC — +150ºC |
| Temperature Fluctuation | ±0.3ºC |
| Cooling Rate | Average 1.0°c/Min Full Rang |
| Heating Rate | Average 1~3°c/Minute (Non-Linear No-Load) |
| Temperature Uniformity | ≤±2ºC(at No Load, Constant State) |
| Brand Name | DGBELL |
| Model Number | BTL-D2-252/BTL-D2-288/BTL-D2-360 |
| Certification | CE/ISO |
| Place of Origin | China |
View Detail Information
Explore similar products
Lab Servo Control Lithium Battery Internal Short Circuit Tester
UN38.3 UL 1642 Free Fall Impact Test Equipment , Mechanical Shock Test Machine
Lithium Ion Battery Washing Test Chamber With PLC Touch Control Remote Control
Laboratory Battery External Short Circuit Current Tester According To UL 2580
Product Specification
| Payment Terms | Western Union, T/T, D/P, D/A, L/C | Supply Ability | 500 Sets per Month |
| Delivery Time | Negotiation | Packaging Details | Each set protected with resin fiber and PP film, then put into Strong wooden case with operation manual inside. |
| Keywords | Climatic Test Chamber for Battery Cell | Power Supply | AC 380V 50HZ |
| Temperature Range | -40ºC — +150ºC | Temperature Fluctuation | ±0.3ºC |
| Cooling Rate | Average 1.0°c/Min Full Rang | Heating Rate | Average 1~3°c/Minute (Non-Linear No-Load) |
| Temperature Uniformity | ≤±2ºC(at No Load, Constant State) | Brand Name | DGBELL |
| Model Number | BTL-D2-252/BTL-D2-288/BTL-D2-360 | Certification | CE/ISO |
| Place of Origin | China | ||
| High Light | ISO Approved Battery Test Chambers ，0.3 Degree Battery Test Chambers ，50HZ Temperature Test Chambers | ||
Features
1. Professional explosion-proof pressure relief design.
2. Professional high temperature smoke exhaust design.
3. Rich temperature monitoring and alarm mode.
4. Insulated and heat-resistant inner wall and partition.
5. Water-based and gas fire extinguishing firefighting linkage experience.
6. Design and guidance of sample layout and wiring.
7. Spray cooling water supply and drainage design.
8. Long-term operation of energy saving and consumption reduction design.
9. Consideration of integration with charging and discharging modules.
10. Better temperature uniformity.
11. Consistent low wind speed conditions.
Application
Double-deck High Low Temperature Test Chamber provides a constant high and low temperature environment condition ranges from -40°C to 150°C (Available for customized design). It is widely used to test the thermal performance of various products and components. The two test cabinets work independently, providing high efficiency and performance for laboratory testing. Furthermore, the additional explosion-proof function enables this test chamber to be combined with the charge-discharge test, providing a temperature environment for various battery performance testing.
Features
Standards
Performance parameters
| Model |
BTL-D2-252 | BTL-D2-288 | BTL-D2-360 |
| Single Cabinet Inner Dimension
| W600 X D700 X H600 MM | W800 X D600 X H600 MM | W1000 X D600 X H600 MM |
| External Dimension
| W1300 X D1800 X H1950 MM | W1500*H1950*D1700 MM | W1740*H1900*D2100 MM |
| Structure Mode
| An integral structure with upper and lower cabinets. | ||
| Temperature Range
| -40ºC - +150ºC | ||
| Temperature Fluctuation
| ±0.3ºC | ||
| Heating Rate
| Average 1~3°C/minute (non-linear no-load) | ||
| Cooling Rate
| Average 1.0°C/min Full rang (non-linear no-load) | ||
| Temperature Uniformity
| ≤±2ºC(at no load, constant state) | ||
| Observation Window
| Three-layer vacuum tempered glass | ||
| Test Terminal
| 12 sets of terminals are connected to the test cabinet inside and outside of the chamber | ||
| Cooling Mode
| Air cooling / Water cooling (Optional) | ||
| Compressor
| Tecumseh (France) | ||
| Controlling Mode
| Touch screen programmable control PLC, with USB interface, with RS485 .interface can be connected to computer control, special network control software, convenient remote monitoring, data acquisition | ||
| Internal Chamber Material
| 1.0MM thick SUS304# stainless steel with mirror finish, sprayed with Teflon insulation | ||
| External Chamber Material
| 1.2 MM thick Galvanized sheet, dusting pained with high temperature plasticized coating. | ||
| Power Supply
| AC380V 50HZ 12KW/14KW/16KW | ||
| Safety Protection
| Automatic explosion-proof pressure relief device, explosion-proof chain, tri-color light alarm device, remote control, smoke exhaust device, fire extinguishing device, etc. | ||
| Extension Function
| Provide communication protocol, able to accompanied use with charge and discharge machine | ||
Use common sense of high and low temperature test chamber
Company Details
Business Type:
Manufacturer,Seller
Year Established:
2005
Total Annual:
10000000-100000000
Employee Number:
100~200
Ecer Certification：
Active Member
DGBELL is one of the top environmental test chamber manufacturer and battery testing equipment suppliers, we focus on test chambers for 15+ years. Company Profile Guangdong Bell Experiment Equipment Co., Ltd was established in 2005 with a registered capital of RMB 16.8 million. Located in Dong... DGBELL is one of the top environmental test chamber manufacturer and battery testing equipment suppliers, we focus on test chambers for 15+ years. Company Profile Guangdong Bell Experiment Equipment Co., Ltd was established in 2005 with a registered capital of RMB 16.8 million. Located in Dong...
Get in touch with us
Leave a Message, we will call you back quickly!