Resistors and capacitors are fundamental components in electronic circuits, and their performance can be significantly affected by temperature and humidity. Ensuring their reliability and stability under various environmental conditions is crucial for the proper functioning of electronic devices. Our budget - friendly temperature and humidity controlled chamber for resistors and capacitors is a cost - effective solution designed to meet the testing and storage needs of these essential electronic components. This chamber provides a controlled environment for simulating different temperature and humidity levels, enabling manufacturers, researchers, and quality control teams to evaluate and optimize the performance of resistors and capacitors.
We understand the importance of cost - efficiency in the electronics industry, especially when it comes to testing and storage equipment. Our chamber is designed with a focus on delivering high - quality performance at an affordable price. By using cost - effective materials and streamlined manufacturing processes, we have been able to keep the initial investment low without compromising on the essential functionality. Additionally, the chamber is energy - efficient, resulting in lower operating costs over its lifespan.
Despite its budget - friendly nature, the chamber offers precise temperature and humidity control. The temperature can be adjusted within a range suitable for testing resistors and capacitors, typically from - 70°C to 150°C, with a precision of ±1°C. Humidity levels can be set from 10% to 90% relative humidity (RH), with an accuracy of ±5% RH. These precise control capabilities allow for accurate simulation of different environmental conditions that resistors and capacitors may encounter in real - world applications.
The chamber provides a variety of test modes to meet different testing requirements. It supports steady - state testing, where the temperature and humidity are held constant for a specific period to evaluate the long - term stability of the components. Cyclic testing is also available, which involves cycling the temperature and humidity through predefined ranges to simulate the effects of changing environmental conditions over time. Custom - programmed test sequences can be created as well, enabling users to mimic specific real - world scenarios that the components might experience.
Resistors and capacitors are often small in size, and our chamber is designed to be compact and space - saving. It has a relatively small footprint, making it suitable for installation in laboratories, production facilities, or even small workshops with limited space. The interior of the chamber is efficiently organized to accommodate a sufficient number of components for testing or storage, maximizing the use of available space.
The chamber is equipped with a user - friendly interface that makes it easy to operate. The control panel features clear displays and intuitive buttons for setting temperature, humidity, and test modes. Even users with limited technical knowledge can quickly learn how to operate the chamber. Additionally, the interface provides real - time information on the current temperature and humidity levels inside the chamber, allowing users to monitor the testing or storage process at a glance.
Built to last, the chamber is constructed using durable materials that can withstand the rigors of regular use. The exterior is made of high - quality, corrosion - resistant metal that provides protection against physical damage and environmental factors. The interior is lined with materials that are resistant to moisture and chemicals, ensuring a stable and reliable environment for the components. The components of the temperature and humidity control systems are also selected for their durability and long - term performance.
| Model | THC-225 | THC-408 | THC-800 | THC-1000 |
| Inside dimension(W x D x H) mm | 50 x 75 x 60 | 60 x 85 x 80 | 100 x 100 x 80 | 100 x 100 x 100 |
| Outside dimension(W x D x H) mm | 75 x 165 x 170 | 85 x 175 x 190 | 125 x 190 x 190 | 125 x 190 x 210 |
| Internal material | #304 Stainless Steel |
| External material | Powder coated #304 Stainless Steel |
| Temperature range | + 150℃~ - 70 ℃ |
| Humidity range | 5% ~ 98% R. H |
| Temperature resolution ℃ | 0.01 |
| Humidity resolution % R. H. | 0.1 |
| Temperature stability ℃ | ±0.3 |
| Humidity stability % R. H. | ±2 |
| High temperature ℃ | 100 | 100 | 100 | 100 |
| Heating time (min) | 20 | 30 | 30 | 30 |
| Low temperature | 0, -40, -70 | 0, -40, -70 | 0, -40, -70 | 0, -40, -70 |
| Cooling time (min) | 20, 50, 70 | 20, 50, 70 | 20, 50, 70 | 20, 50, 70 |
| Air circulation system | Mechanical convection system |
| Cooling system | Imported compressor, fin evaporator, gas condenser |
| Heating system | Sus304 Stainless steel High-speed heater |
| Humidification system | Steam Generator |
| Humidification water supply | Reservoir, Sensor-controller solenoid valve, recovery-recycle system |
| Controller | Touch panel |
| Electrical power requirements | Please contact us for requirements of specific models |
| Safety device | Circuit system load protection, compressor load protection, control system load protection, humidifier load protection, overtemperature load protection, fault warning light |
The budget - friendly nature of our chamber makes it an attractive option for electronics manufacturers, researchers, and small businesses. The low initial investment and energy - efficient operation result in significant cost savings over time. This allows companies to allocate their resources more effectively, especially in cases where multiple chambers may be required for different testing or storage needs.
By subjecting resistors and capacitors to controlled temperature and humidity conditions, manufacturers can identify potential performance issues early in the production process. This enables them to make necessary adjustments to the manufacturing process or component design, resulting in higher - quality components. The ability to simulate real - world environmental conditions also ensures that the components are reliable and stable when used in actual electronic devices.
The electronics industry is subject to various international and national standards regarding the performance and reliability of components under different environmental conditions. Our chamber is designed to help manufacturers and researchers comply with these standards. By conducting accurate and reliable tests in the chamber, they can ensure that their components meet the required specifications, facilitating product certification and market entry.
For researchers, the chamber provides a valuable tool for studying the behavior of resistors and capacitors under different temperature and humidity conditions. It allows them to explore new materials, designs, and manufacturing processes to improve the performance and characteristics of these components. The ability to precisely control the environment enables in - depth research and the development of innovative solutions.
In the production process, the chamber is an essential tool for quality control. By testing a sample of components from each production batch in the chamber, manufacturers can ensure that the components meet the specified quality standards. This helps in identifying and rectifying any manufacturing defects early, reducing the number of faulty components that reach the market and improving overall product quality.
Electronics manufacturers use the chamber to test resistors and capacitors during the production process. By subjecting the components to different temperature and humidity conditions, they can verify their performance and reliability. This helps in ensuring that only high - quality components are used in the final electronic products, reducing the risk of product failures.
Researchers in the field of electronics use the chamber to conduct experiments on new types of resistors and capacitors. They can study the effects of temperature and humidity on the electrical properties of these components, which can lead to the development of new materials and designs with improved performance.
Quality control teams use the chamber to perform batch testing of resistors and capacitors. By testing a representative sample of components from each production batch, they can ensure that the components meet the required quality standards. This helps in maintaining the overall quality of the electronic products that use these components.
The chamber can also be used for storing resistors and capacitors under controlled temperature and humidity conditions. This is particularly important for components that are sensitive to environmental changes and need to be stored for an extended period. By maintaining the proper storage conditions, the lifespan and performance of the components can be preserved.
Our budget - friendly temperature and humidity controlled chamber for resistors and capacitors is a valuable asset for the electronics industry. With its cost - effective design, precise control capabilities, multiple test modes, compact size, user - friendly interface, and durable construction, it provides a practical and reliable solution for testing, research, and storage of these essential electronic components. Whether you are an electronics manufacturer looking to improve product quality, a researcher exploring new technologies, or a quality control professional ensuring compliance, our chamber can meet your specific needs. Contact us today to learn more about how our product can enhance your operations in the electronics field.
.
