In the automotive industry, ensuring the performance, reliability, and safety of vehicles across a wide range of environmental conditions is of utmost importance. Our Custom Walk - in Environmental Test Chamber for Whole Car is a specialized and innovative solution designed to meet the rigorous testing requirements of automobiles. This large - scale chamber provides a controlled environment where entire vehicles can be subjected to various real - world environmental scenarios, enabling manufacturers, researchers, and quality control teams to evaluate the vehicle's response and performance under different conditions.
The most prominent feature of this test chamber is its spacious and adaptable interior. With customizable dimensions, it can comfortably accommodate a wide variety of vehicles, from compact cars to large SUVs and commercial trucks. The standard chamber sizes range from [X] cubic meters to [X] cubic meters, allowing for flexibility in testing different vehicle models. The interior is equipped with a sturdy floor capable of supporting the weight of the vehicle, and it can be customized with various fixtures and mounts to secure the vehicle during testing. Additionally, the chamber has enough clearance to allow for the installation of additional testing equipment and sensors around the vehicle.
This chamber offers precise control over a comprehensive set of environmental parameters. Temperature can be adjusted from extremely low (- 70°C) to very high (150°C) with an accuracy of ± 0.5°C. This wide temperature range is essential as vehicles may operate in diverse climates, from arctic regions to deserts. Humidity levels can be regulated between 10% and 95% relative humidity, simulating different levels of moisture in the air. The chamber can also simulate altitude changes (up to 20000 meters equivalent altitude), air circulation patterns, and exposure to various environmental factors such as dust, rain, snow, and sunlight. These capabilities allow for the replication of almost any real - world environmental condition a vehicle might encounter.
We understand that different vehicles have unique design features, performance requirements, and target markets. Therefore, our chamber allows for fully customizable test profiles. Manufacturers and testers can program complex temperature and humidity cycles, dwell times, and transition rates to replicate the specific environmental conditions that the vehicle will face in real - world scenarios. For example, a test profile for an off - road vehicle might include exposure to high - dust environments, extreme temperature variations, and simulated altitude changes during off - road driving. On the other hand, a luxury sedan's test profile could focus on comfort and performance in different climate conditions during normal urban and highway driving. This flexibility ensures that each vehicle is tested under the most relevant and accurate conditions, resulting in reliable and actionable test results.
The walk - in environmental test chamber is equipped with a state - of - the - art monitoring and data acquisition system. Multiple sensors are strategically placed throughout the chamber and on the vehicle itself to continuously monitor all environmental parameters and vehicle performance metrics. These sensors can measure temperature, humidity, air pressure, vibration, and various vehicle - specific data such as engine performance, fuel consumption, and emissions. The real - time data is accessible and analyzable through an intuitive touch - screen control panel. The system also has the ability to record and store historical data, enabling users to compare results from different tests and analyze trends over time.
Built with high - quality materials and advanced engineering techniques, the walk - in environmental test chamber is designed to withstand the rigors of continuous use. The exterior is constructed from a strong, corrosion - resistant alloy that can endure exposure to harsh chemicals and extreme temperatures. The internal components, including heating, cooling, and humidity control systems, are built to last and are regularly maintained to ensure consistent performance. Safety features such as emergency stop buttons, over - temperature protection, gas leakage detection, and fire suppression systems are in place to protect operators and the vehicle being tested.
The chamber is equipped with a user - friendly interface that simplifies the testing process. The intuitive touch - screen control panel allows operators to easily set up test profiles, start and stop tests, and monitor real - time data. The interface also provides access to historical test data, enabling users to compare results from different tests and make informed decisions about vehicle design and improvement. Additionally, the system can be integrated with other testing equipment and software, allowing for seamless data transfer and comprehensive analysis of the test results.
| Model |
WIC-6 |
WIC-11 |
WIC-15 |
WIC-48 |
WIC-66 |
WIC-100 |
| Inside dimension(W x D x H) mm |
200 x 220 x 150 |
250 x 220 x 200 |
350 x 220 x 200 |
500 x 240 x 400 |
500 x 240 x 400 |
100 x 100 x 100 |
| Outside dimension(W x D x H) mm |
280 x 260 x 180 |
350 x 260 x 230 |
455 x 260 x 230 |
610 x 280 x 430 |
680 x 280 x 530 |
155 x 190 x 160 |
| Internal material |
#304 Stainless Steel |
| External material |
Powder coated #304 Stainless Steel |
| Temperature range |
+ 150℃~ - 70 ℃ |
| Humidity range |
20% ~ 98% R. H |
| Temperature resolution ℃ |
0.01 |
| Humidity resolution % R. H. |
0.1 |
| Temperature stability ℃ |
±0.5 |
| Humidity stability % R. H. |
±2 |
| Heating time |
30min |
| Cooling time |
-40℃/50min, -20℃/30min |
| Air circulation system |
Mechanical convection system |
| Cooling system |
Sirocco Fan |
| Heating system |
Sus316 Stainless steel Efficient heater |
| Humidification system |
Steam Generator |
| Humidification water supply |
Reservoir, Sensor-controller solenoid valve, recovery-recycle system |
| Controller |
Touch panel |
| Electrical power requirements |
Please contact us for requirements of specific models |
| Safety device |
Circuit system load protection, compressor load protection, control system load protection, humidifier load protection, overtemperature load protection, fault warning light |
Subjecting whole cars to comprehensive environmental testing in our walk - in chamber allows manufacturers to identify and address potential weaknesses in design, material selection, and manufacturing processes. By exposing the vehicle to extreme environmental conditions, manufacturers can detect issues such as engine overheating, battery performance degradation, and electrical system malfunctions. This enables them to make necessary design modifications and manufacturing improvements, resulting in higher - quality vehicles that are more reliable and durable.
Early detection of vehicle issues through environmental testing can save manufacturers significant costs. By identifying and resolving problems before mass production, companies can avoid expensive rework, production delays, and potential product recalls. The ability to test entire vehicles in a controlled environment also reduces the need for costly field testing in multiple real - world locations. Additionally, the comprehensive data collected during testing can help optimize vehicle design, leading to cost savings in materials and manufacturing processes.
The automotive industry is subject to numerous international and national regulations regarding vehicle performance and emissions in different environmental conditions. Our walk - in environmental test chamber helps manufacturers ensure that their vehicles comply with these regulations. By conducting thorough testing in accordance with relevant standards, manufacturers can demonstrate compliance and gain regulatory approval more easily.
In a highly competitive automotive market, offering vehicles that can perform well in various environmental conditions gives manufacturers a significant competitive edge. By using our custom walk - in environmental test chamber to conduct in - depth and comprehensive testing, companies can differentiate their products from competitors and showcase their commitment to quality and reliability. Customers are increasingly demanding vehicles that can handle different climates and terrains, and by providing such vehicles, manufacturers can attract more customers and increase market share.
- Cold Start Performance: Test the engine's cold start performance at extremely low temperatures to ensure reliable ignition and smooth operation. This includes evaluating the fuel injection system, battery performance, and engine oil viscosity in cold conditions.
- High - Temperature Performance: Evaluate the engine's performance under high - temperature conditions, such as in hot deserts or during continuous high - speed driving. This helps identify issues such as overheating, power loss, and fuel vaporization.
- Altitude Performance: Test the powertrain's performance at different altitudes to ensure proper engine power delivery and transmission operation. This is crucial for vehicles that may be used in mountainous regions.
- Electrical Component Reliability: Test the reliability of electrical components such as batteries, alternators, and wiring systems under different temperature and humidity conditions. This helps identify potential electrical failures, short circuits, and battery degradation.
- Electronic Control Unit (ECU) Performance: Evaluate the performance of the vehicle's Electronic Control Units (ECUs) in various environmental conditions. This includes testing the ECU's ability to adapt to temperature changes, vibration, and electromagnetic interference.
- Infotainment and Connectivity Systems: Test the infotainment and connectivity systems of the vehicle, such as navigation, audio, and Bluetooth, in different environmental conditions. This ensures that these systems function properly and provide a seamless user experience.
- HVAC System Performance: Test the Heating, Ventilation, and Air Conditioning (HVAC) system of the vehicle to ensure proper temperature and humidity control in different environmental conditions. This includes evaluating the system's cooling and heating capacity, air distribution, and energy efficiency.
- Seating and Interior Comfort: Evaluate the comfort of the vehicle's seating and interior in different environmental conditions. This includes testing the durability of seat materials, the effectiveness of insulation, and the comfort of the cabin in extreme temperatures.
- Safety System Performance: Test the vehicle's safety systems, such as airbags, anti - lock braking systems (ABS), and traction control systems, in various environmental conditions. This ensures that these systems function properly and provide reliable protection for the vehicle occupants.
Our Custom Walk - in Environmental Test Chamber for Whole Car is a state - of - the - art solution that offers a comprehensive and reliable platform for testing the performance and durability of vehicles under various environmental conditions. With its advanced features, precise environmental control, and user - friendly interface, it enables automotive manufacturers to enhance vehicle quality, reduce costs, meet regulatory requirements, and gain a competitive advantage. Whether you are a manufacturer looking to improve your vehicle designs or a researcher seeking to understand the impact of the environment on vehicle performance, our chamber is the ideal choice. Contact us today to learn more about how our chamber can meet your specific testing needs.
