Custom Vibration Shaker Climate Chamber For Rail Transit Communication Signal

1. Product Name and Purpose

2. Product Features

Custom Vibration Shaker

• Precise and Tailored Vibration Generation
  • The custom vibration shaker is engineered to generate a wide spectrum of vibration frequencies, typically adjustable from 1 Hz to 2000 Hz. This broad range allows for the simulation of various types of vibrations that rail transit communication signal equipment may experience. Low - frequency vibrations can mimic the steady - state vibrations during normal train operation, while high - frequency vibrations can represent the sudden impacts or vibrations caused by track irregularities or train - to - train interactions. The vibration amplitude is precisely controllable, with a range of 0.1 mm to 20 mm (peak - to - peak), enabling the reproduction of different levels of vibration intensity.
  • It can generate vibrations in multiple axes, including vertical, horizontal, and rotational axes. Rail transit communication signal equipment is often exposed to complex multi - directional forces. For example, equipment installed on the train may experience vertical vibrations from the movement of the wheels on the tracks, horizontal vibrations during acceleration and deceleration, and rotational vibrations due to the train's turning. The multi - axis vibration capability of the shaker provides a more realistic simulation of these actual mechanical stresses, helping to identify potential weak points in the equipment's structure and internal connections.
• Highly Customizable Vibration Profiles
  • Operators have the flexibility to create highly customized vibration profiles based on specific test requirements. These profiles can incorporate continuous vibrations, intermittent shocks, or complex sequences that mimic the exact vibration scenarios rail transit communication signal equipment is likely to face. For instance, a profile can be designed to simulate the vibrations during a typical rail journey, including the start - up, cruising, and braking phases, as well as the vibrations during emergency stops or when passing through areas with poor track conditions. The ability to customize these profiles ensures that the testing is as realistic as possible, closely replicating the conditions in the rail transit environment.
• Robust and Durable Design
  • Built with high - quality materials and advanced engineering, the custom vibration shaker is designed to withstand the rigors of continuous testing. The shaker's frame is constructed from heavy - duty steel, providing a stable and rigid platform for generating vibrations. The vibration - generating mechanism is engineered for long - term reliability and precision, ensuring consistent and accurate test results over extended periods. Additionally, the shaker is designed to handle a wide range of payloads, from small communication modules to larger signal control units, accommodating the diverse sizes and weights of rail transit communication signal equipment.

Climatic Test Chamber

• Comprehensive Climatic Simulation
  • The climatic test chamber integrated with the vibration shaker can create a wide range of climatic conditions. The temperature can be adjusted from extremely low values, such as - 40°C to simulate cold regions, to high temperatures of up to + 80°C to mimic hot and humid climates or the heat generated in confined spaces near signal equipment. The humidity control can maintain relative humidity levels from 10% to 95%, enabling the testing of how components respond to different moisture levels. This is crucial as high humidity can cause corrosion, electrical short - circuits, and other malfunctions in electronic components, while low humidity can lead to issues such as static electricity build - up.
  • The chamber can also simulate other climatic factors such as rain, snow, and dust exposure. In rail transit, communication signal equipment may be exposed to harsh weather conditions, and the ability to simulate these conditions is essential for evaluating the equipment's durability and performance. For example, simulating rain can help identify potential water ingress points in the equipment, while dust exposure testing can assess the effectiveness of dust - proof seals.
• Rapid Climatic Transitions
  • Rail transit communication signal equipment may experience sudden changes in the climate, such as moving from a cool, dry station to a hot, humid tunnel or vice versa. The climatic test chamber is capable of rapid climatic transitions, with temperature transition rates of up to 10°C/min and humidity transition rates of up to 5%/min. This allows for the testing of how equipment responds to these abrupt changes, which can be a significant stress factor in its operation.
• Large and Uniform Test Volume
  • The climatic test chamber features a large test volume, typically ranging from 5 m³ to 50 m³, depending on the model. This spacious interior can accommodate a variety of rail transit communication signal equipment, from individual devices to complete sub - systems. The chamber is designed to provide uniform climatic conditions throughout the test volume, with temperature variations within ±1°C and humidity variations within ±5% relative humidity. This ensures that all parts of the tested equipment are exposed to the same environmental conditions, resulting in reliable and consistent test results.

Integrated Control and Monitoring

• User - Friendly Interface
  • The entire test system is controlled through a user - friendly interface that simplifies the operation process. The interface allows operators to easily set and adjust the test parameters for both the vibration shaker and the climatic test chamber. It provides a clear display of the current test status, including vibration frequencies, amplitudes, temperature, humidity, and elapsed test time. The interface is designed to be intuitive, even for users with limited technical expertise, ensuring efficient and accurate testing.
• Comprehensive Data Acquisition and Analysis
  • Equipped with a comprehensive data acquisition system, the test system records all relevant data during the test. This includes vibration measurements in multiple axes, temperature and humidity profiles, and any observed equipment failures or performance changes. The data can be stored in a secure database and analyzed using advanced software tools. The system can generate detailed test reports, including graphs, charts, and statistical analysis, to help engineers and technicians understand the test results and make informed decisions.
• Remote Monitoring and Control
  • Many models of this combined test system offer remote monitoring and control capabilities. This feature is particularly valuable in the rail transit industry, where testing may need to be conducted in large maintenance depots or along extensive rail networks. Operators can monitor the test progress and adjust the test parameters from a remote location, such as an office or a control center. This allows for continuous supervision and timely intervention, ensuring the efficiency and effectiveness of the testing process.

3. Specific Parameters

• Custom Vibration Shaker Parameters

  • Rated Sine Force	300kgf- 8000kg.f
    Frequency Range	DC-3000Hz
    Max. Displacement p-p	51-100mm
    Max acceleration	100g
    Max. Velocity (m/s)	2.0
    Max. Payload	300-5000kg

• Climatic Test Chamber Parameters

  • Model	CTHC-80	CTHC-150	CTHC-225	CTHC-408	CTHC-800	CTHC-1000
    Inside dimension(W x D x H) cm	40 x 50 x40	50 x 60 x 50	50 x 75 x 60	60 x 85 x 80	100 x 100 x 80	100 x 100 x 100
    Outside dimension(W x D x H) cm	95 x 140 x 95	105 x 150 x 105	105 x 165 x 115	115 x 175 x 140	155 x 190 x 140	155 x 190 x 160
    Internal material	#304 Stainless Steel
    External material	Powder coated #304 Stainless Steel
    Temperature range	+ 150℃~ - 70 ℃
    Humidity range	10% ~ 98% R. H
    Temperature Uniformity ℃	0.01
    Humidity Uniformity % R. H.	0.1
    Temperature stability ℃	±0.3
    Humidity stability % R. H.	±2
    High temperature ℃	100	100	100	100	100	100
    Heating time (min)	20	30	30	30	30	30
    Low temperature	0, -40, -70	0, -40, -70	0, -40, -70	0, -40, -70	0, -40, -70	0, -40, -70
    Cooling time (min)	20, 50, 70	20, 50, 70	20, 50, 70	20, 50, 70	20, 50, 70	20, 50, 70
    Air circulation system	Mechanical convection system
    Cooling system	Imported compressor, fin evaporator, gas condenser
    Heating system	Sus304 Stainless steel High-speed heater
    Humidification system	Steam Generator
    Humidification water supply	Reservoir, Sensor-controller solenoid valve, recovery-recycle system
    Controller	Touch panel
    Electrical power requirements	Please contact us for requirements of specific models
    Accessories	Multi-layer enhanced glass window,test hole, action indicator light, case lighting barrier shelf x2
    Safety device	Circuit system load protection, compressor load protection, control system load protection, humidifier load protection, overtemperature load protection, fault warning light

4. Product Functions

• Reliability and Durability Testing
  • By subjecting rail transit communication signal equipment to combined mechanical vibrations and climatic stress, the system helps identify potential weaknesses and failure points. This allows for the improvement of product designs to enhance reliability and durability, reducing the risk of equipment failures during long - term operation. In rail transit, communication signal equipment failures can lead to service disruptions, safety hazards, and significant economic losses, so ensuring reliability is of utmost importance.
• Design Optimization
  • The data collected from the tests provides valuable insights into how rail transit communication signal equipment responds to different conditions. Engineers can use this information to optimize product designs, such as improving the structural integrity of equipment enclosures, enhancing the insulation of electrical components to prevent moisture ingress, or developing more effective cooling systems for high - temperature environments. For example, if a signal transmitter shows signs of malfunctioning under high - humidity and vibration conditions, the design can be modified to improve its resistance.
• Quality Control
  • The system serves as a crucial tool for quality control in the manufacturing and maintenance of rail transit communication signal equipment. By testing equipment before it is installed or during routine maintenance, manufacturers and maintenance teams can ensure that it meets the strict quality standards set by the rail transit industry. This helps to prevent defective equipment from being used, ensuring the overall quality and safety of rail transit communication signal systems.
• Compliance Testing
  • The rail transit industry is subject to various national and international standards and regulations regarding the performance and reliability of communication signal equipment. The custom vibration shaker combined with the climatic test chamber enables manufacturers and maintenance teams to conduct compliance testing to ensure that their products meet these requirements. For example, standards may specify the maximum vibration levels and climatic conditions that rail transit communication signal equipment must withstand.

5. Production and Quality Assurance

• Stringent Manufacturing Process
  • The manufacturing of this combined test system follows strict quality control procedures. Each component, from the vibration shaker's electromagnetic drive system and the climatic test chamber's sensors to the control electronics and structural frame, is sourced from reliable suppliers and undergoes thorough inspection and testing. The assembly process is carried out by highly trained technicians in a clean and controlled environment. The system is calibrated and verified at multiple stages during production to ensure its accuracy and performance.
• Quality Certification and Validation
  • Our test system has obtained relevant quality certifications, such as ISO standards for testing equipment and rail - specific certifications. It has also been validated by independent testing laboratories to ensure that it meets industry standards and provides accurate and reliable test results. We continuously update and improve our product based on the latest technological advancements and customer feedback to maintain its high quality and performance.

6. Application Areas and Success Stories

• On - board Communication Device Testing
  • A leading rail transit equipment manufacturer used the system to test a new on - board communication device. The device was subjected to a combination of multi - axis vibrations, extreme temperature changes, and humidity variations, along with rain and dust exposure. The testing revealed that the device's antenna connection was prone to loosening under high - vibration and high - humidity conditions. By improving the antenna's locking mechanism and adding moisture - resistant coatings, the manufacturer was able to enhance the device's reliability, ensuring stable communication during train operation.
• Track - side Signal Transmitter Testing
  • A company manufacturing track - side signal transmitters utilized the system to test the performance of its new models. The transmitters were exposed to a variety of vibration and climatic conditions to simulate the harsh environment along the rail tracks. The testing showed that the transmitter's cooling system was not sufficient under high - temperature and high - humidity conditions, leading to overheating and signal interference. By optimizing the cooling design and improving the heat dissipation capabilities, the company was able to improve the transmitter's performance and reliability, ensuring accurate signal transmission.
• Communication Cable Testing
  • A supplier of communication cables for rail transit used the system to test the durability and performance of its products. The cables were subjected to vibrations, temperature variations, and humidity changes, as well as dust exposure. The testing identified that the cable's insulation was prone to degradation under high - humidity and vibration conditions. By improving the insulation material and adding additional protective layers, the supplier was able to enhance the cable's reliability and lifespan, ensuring continuous communication signal transmission.

7. Service and Support

• Pre - Sales Technical Consultation
  • Our team of rail transit testing experts provides in - depth technical consultations to help customers understand the capabilities and suitability of the system for their specific testing needs. We offer demonstrations and training sessions to familiarize customers with the operation and functionality of the system before purchase. We also assist in selecting the appropriate test parameters and accessories based on the rail transit communication signal equipment to be tested.
• After - Sales Service and Maintenance
  • We offer comprehensive after - sales service, including on - site installation and commissioning. Our team of experienced technicians is available for regular maintenance, calibration, and emergency repairs. We provide genuine spare parts and timely upgrades to ensure the long - term performance and reliability of the testing system. We also offer service contracts that include preventive maintenance and priority technical support.
• Training and Technical Support
  • We conduct training programs for new users to ensure they can effectively operate the testing system and interpret the test results. Our technical support team is available 24/7 to answer questions, provide troubleshooting assistance, and offer guidance on test method optimization. We also provide software updates and support for the data acquisition and analysis systems to keep the system up - to - date with the latest features and technologies.