BOTO GROUP LTD
| Payment Terms | L/C, T/T, Western Union |
| Supply Ability | 100000Set/month |
| Delivery Time | 20-30workdays |
| Packaging Details | PLY-WOODEN CASE |
| Power: | Electronic, 220V 50HZ |
| Design standard: | GB/T 10587-2006, GB/T 10125-1997 |
| Test chamber volume: | 108L/270L/600L/1440L or custom made |
| Spray quantity: | 1.0~2.0ml/80cm2/h |
| PH | 6.5~7.2 3.0~3.2 |
| Test chamber temperature: | NSS.ACSS 35°C±1°C/CASS 50°C±1°C |
| Saturated air cylinder temperature: | NSS.ACSS 47°C±1°C/CASS 63°C±1°C |
| Color: | Customer's Request |
| Warranty: | 12months |
| Brand Name | BOTO |
| Model Number | BT |
| Certification | CE ISO |
| Place of Origin | CHINA |
View Detail Information
Explore similar products
SUS304 Salt Corrosion Test ISO 9227 Salt Spray Cabinet
SSR Machine 60hZ Salt Spray Test Chamber GB LCD Touch Screen
Sea Salt Spray Cyclic Corrosion Test Astm Standard 270L
Battery Performance FRP EN PID Singleton Spray Salt Fog Test Chamber
Product Specification
| Payment Terms | L/C, T/T, Western Union | Supply Ability | 100000Set/month |
| Delivery Time | 20-30workdays | Packaging Details | PLY-WOODEN CASE |
| Power: | Electronic, 220V 50HZ | Design standard: | GB/T 10587-2006, GB/T 10125-1997 |
| Test chamber volume: | 108L/270L/600L/1440L or custom made | Spray quantity: | 1.0~2.0ml/80cm2/h |
| PH | 6.5~7.2 3.0~3.2 | Test chamber temperature: | NSS.ACSS 35°C±1°C/CASS 50°C±1°C |
| Saturated air cylinder temperature: | NSS.ACSS 47°C±1°C/CASS 63°C±1°C | Color: | Customer's Request |
| Warranty: | 12months | Brand Name | BOTO |
| Model Number | BT | Certification | CE ISO |
| Place of Origin | CHINA | ||
| High Light | 7.2ph Aging Salt Spray Test Chamber ，2.0ml Salt Spray Test Chamber ，2.0ml salt mist chamber | ||
Reference standard The brine spray test mainly refers to the reference standard: JIS, ASTM, CNS, GB standard parameter setting.
Product instruction
Air supply system
The air pressure is 1kg / cm2 and adjusted in two stages. The first section is about 2kg / cm2, which is equipped with inlet air filter and drainage function. The second stage is precisely adjusted 1kg / cm2, 1 / 4 pressure gauge, with accurate display.
1)GB/T2423.17-2008/IEC 60068-2-11 Test method for salt spray
2)ASTM.B117-2009 Test method for salt spray
3)JIS H8502 Test method for saline spray
4)GB/T10125-2012/ISO 9227-2006Test method for saline spray
5)GB-T5170.8-2008 Test method for environmental test equipment for electrical and electronic products - salt spray test equipment
6)GB-T5170.11-2008 Test method for corrosive gas test equipment
7)GB-T10587-2006 Technical conditions of salt spray test chamber
8)GBT 20121-2006 / ISO11474-1998 Corrosion of metals and alloys - corrosion tests in artificial atmospheres - outdoor accelerated test under salt spray - scab test
| Product Name | Salt Fog Corrosion Testing Machine / Salt Spray Ageing Chamber / Salt Mist Resistance Tester Salt Spray Test Chamber | |||||
| Product Model | MQ-YW-60 | MQ-YW-90 | MQ-YW-120 | MQ-YW-160 | MQ-YW-200 | |
| Volume(L) | 108 | 270 | 480 | 800 | 1440 | |
| Internal Size W×H×W(mm) | 600×400×450 | 900×500×600 | 1200×500×800 | 1600×500×1000 | 2000×600×1200 | |
| External Size W×H×W(mm) | 1150×1090×672 | 1450×1200×842 | 2080×1285×1240 | 2480×1520×1450 | 2900×1550×1650 | |
| Performance Index | Temperature Range | LaboratoryTemperature Range :RT~50℃ Saturated air barrelTemperature Range :RT~63℃ | ||||
| Temperature Deviation | ±1.0℃ | |||||
| Temperature Uniformity | ≤2.0℃ | |||||
| Temperature Fluctuation | ±0.5℃ | |||||
| Heating Rate | Test Room RT→+50℃≤60 min Pressure Barrel RT→+63℃≤60 min | |||||
| Salt fog deposition | 1~2ml/80 square meter (At least 16 hours were collected and averaged) | |||||
| Spray Pressure | 70~170Kpa | |||||
| Spraying Mode | Continuous spray | |||||
| Test time | 1~999(S,M,H)adjustable | |||||
| PH | 6.5~7.2 3.0~3.2 | |||||
| Main Part | Control System | LCD touch screen temperature controller | ||||
| PT100 thermocouple (armor), PID control | ||||||
| Spraying System | The Nozzle is made of special glass material, the size and angle of spray can be controlled | |||||
| operate manual spray or set automatic spray according to program | ||||||
| Structural Features | Material Enclosure | Imported PVC polyethylene board is adopted | ||||
| Medicament refill cylinder | hidden type supplementary water gauge | |||||
| Pressurized air drum | SUS304# stainless steel high-pressure barrel | |||||
| Test Rack | The plane indexing frame can be used to adjust the Angle of fog falling or being foggy at any direction | |||||
| Cover Material | imported European acrylic board | |||||
| Spray Tower | air atomizing nozzle, height can be adjusted | |||||
| Spray volume collector | Cone funnel with diameter of 100mm | |||||
| Heating System | Titanium alloy heat pipe, steam heating, P.I.D. control heating | |||||
| Brine Tank | Made of PVC board | |||||
| Saturated air barrel | SUS304 Stainless | |||||
| Drain line | acid and alkali resistant PVC piping | |||||
| Heater | Titanium alloy armored electric heating tube (test chamber bottom heating) SUS316# stainless steel armoured heating tube (saturation barrel) | |||||
| Standard Fittings | 1 set of nozzles, 2 fog collecting and measuring cylinders, 2 fog collecting collectors, etc | |||||
| Safty Device | Leakage, short circuit, motor overheating, overload, over current protection | |||||
| Supply Voltage | AC220V 50Hz | |||||
| Environment Requirement | Temperature 5.0~+30.0℃,Humidity≤85%RH,Air Pressure 86Kpa~106Kpa | |||||
BOTO ADVANTAGE
Customers photos
OUR TEAM
Our Services
During the whole business process, we offer Consultative Selling service.
1) Customer inquiry process:
Discussing testing requirements and technical details, suggested suitable products to customer to confirm. Then quote most suitable price according to customer requirements.
2) Specifications customize process:
Drawing related drawings to confirm with customer for customized requirements. Offer reference photos to show the products appearance. Then, confirm the final solution and confirm final price with customer.
3) Production and delivery process:
We will produce the machines according to confirmed PO requirements. Offering photos to show production process.
After finish production, offer photos to customer to confirm again with the machine. Then do own factory calibration or third party calibration(as customer requirements). Check and test all the details and then arrange packing.
Deliver the products in confirmed shipping time and inform customer.
4) Installation and after sale service:
Defines installing those products in the field and providing after-sales support.
Packing & Delivery
Our Services
During the whole business process, we offer Consultative Selling service.
1) Customer inquiry process:
Discussing testing requirements and technical details, suggested suitable products to customer to confirm. Then quote most suitable price according to customer requirements.
2) Specifications customize process:
Drawing related drawings to confirm with customer for customized requirements. Offer reference photos to show the products appearance. Then, confirm the final solution and confirm final price with customer.
3) Production and delivery process:
We will produce the machines according to confirmed PO requirements. Offering photos to show production process.
After finish production, offer photos to customer to confirm again with the machine. Then do own factory calibration or third party calibration(as customer requirements). Check and test all the details and then arrange packing.
Deliver the products in confirmed shipping time and inform customer.
4) Installation and after sale service:
Defines installing those products in the field and providing after-sales support.
Company Details
Business Type:
Manufacturer,Exporter,Seller
Year Established:
2008
Total Annual:
5000000-80000000
Employee Number:
100~500
Ecer Certification：
Verified Supplier
BOTO GROUP LTD. Is a professional manufacturer of environmental test equipment and test service integrating design, research and development, production, sales, service and construction.The company is located in anting town, jiading district, Shanghai, next to saic Volkswagen motor city. Th... BOTO GROUP LTD. Is a professional manufacturer of environmental test equipment and test service integrating design, research and development, production, sales, service and construction.The company is located in anting town, jiading district, Shanghai, next to saic Volkswagen motor city. Th...
Get in touch with us
Leave a Message, we will call you back quickly!