Solid Wood Handrail Aluminum Profiles Luxury Villa Curved Spiral Staircase

Product Specification

Luxury Villa Solid Wood Handrail Aluminum Profiles Curved Spiral Staircase
Basic Information
 

 
Product Display
 

Advantages of aluminum profiles:
1. Good surface treatment performance and bright appearance.
2. It has stable chemical properties, non-magnetic, and can be recycled and reused. It is a benign and recyclable metal material.
3. The coefficient of elasticity is small, and there is no spark in collision and friction, which is the best in automotive technology.
4. It has good thermal conductivity and electrical conductivity, and has outstanding performance in short-distance power transmission.
5. Compared with other metal materials, aluminum profiles have no metal pollution, no toxicity, and no volatile metals in the surface oxide layer.
 
 

 
The unevenness of the aluminum profile in the longitudinal direction is called bending; the uniform bending along the longitudinal direction is called uniform bending; the sudden bending in the aluminum profile is called hard bending; the bending along the width direction (lateral) is called knife bending; the main reason is After the working belt of the mold design or the profile flows out of the die hole, the front end is suddenly subjected to resistance somewhere and bends immediately; or after the aluminum profile flows out of the die hole, the cooling rate is large, and the shrinkage is unbalanced everywhere, causing bending;
Elimination method:
1) Repair the mold working belt to ensure that the aluminum profiles flow evenly;
2) Install a suitable guide path, and keep it smooth from the discharge table to the sliding table, and there must be no obstacles that prevent the profile from advancing;
3) Appropriately increase the elongation rate and straighten the aluminum profile;
4) Properly control the extrusion speed, the cooling air should be uniform, and avoid blowing the cooling profile from one side;

  
Certificates and Honors
 

 
Company Profile
 
Jiangyin Longkang Metal Products Co., Ltd. is located in Zhouzhuang Town, Jiangyin City - the largest aluminum extrusion profile production base. Covering an area of more than 35,000 square meters with more than 350 employees. We focus on metal customization, special-shaped aluminum profiles, aluminum profiles, aluminum tubes, rail transit series, doors and windows aluminum profiles, heat sinks, CNC processed aluminum profiles, interior decoration series, bending series, etc. We also have precision anodizing and various surface treatments, such as PVC film, wood grain, electrophoresis, powder coating, anodizing, etc. After more than 20 years of development, The company has become a modern aluminum production enterprise with perfect quality management system.
Efficiently treating our customers as partners with sincerity, specialization and satisfaction is our managerial principle. Attributed to the backup of a dedicated technical team, filled with wide and profound knowledge and practice in aluminum profile and world trade for 20 years, the company owns rich experience in product quality control and profile physical properties such as Hardness, Stretchability, Flatness, Straightness, and Tolerance etc. In line with the principle of sharing the preferential cost and joint development, the company has formed an interest community for years with its customers at home and abroad. Sincerely to build up a pleasant mutual trust, cooperative, win-win and value-added sustainable partnership is what we are achieving to grow together with you!
 
The company has the ability to develop and design molds independently, we can produce any extruded aluminum profiles according to your mechanical drawing or sample. Longkang has 10 extrusion production lines (600-3500 tons), one automatic oxidation electrophoresis production line, vertical and horizontal spraying production line per each, and a variety of advanced supporting production, processing and testing equipments. There are also CNT digital control drilling and milling machine(CNC), double head saw, hydraulic saw and punching machine in our processing workshop. The complete technological process can benefit to reduce the production turnover times for semi-finished products, to avoid the damage during transportation, improve the production efficiency, reduce the cost of production,and to ensure the quality and delivery time.
 
Factory display
  
  
FAQ
  
Q: What colors can powder coatings be used for? The thickness of the powder coat?
A: We can do any color for powder coating as long as you can provide color samples. Our usual powder coating thickness is 60-80um.
 
Q:How long can I receive the goods after placing the order?
A: 15-30 working days after receiving the deposit (depending on the quantity).
 
Q: Are all color products the same finish?
A: No. With powder coatings, bright colors will be higher than white or gray. Regarding the price of anodizing, the color will be higher than the silver, and the black will be higher than the color.