45 Series 50 Series Door Aluminium Window Profiles T Nuts Silver

Product Specification

Windows Frame Extrusion Rectangular Sliding Door Profile Aluminium Window Profiles
 
Basic Information

 
Product Display
 

 
Waterproof seal design
⒈Minimum control index of watertight performance of aluminum alloy doors and windows
The minimum watertightness index of aluminum alloy doors and windows can be taken from the following formula and not less than 150Pa (that is, the watertightness of aluminum alloy doors and windows cannot be lower than the level 2 index):
P=k×μz×μs×wo
In the formula, P: the design value of water tightness (Pa);
wo: basic wind pressure (N/㎡);
μz: wind pressure height variation coefficient;
μs: body shape coefficient, preferably 1.2;
k: coefficient, the value of k is 0.3 in coastal tropical storm and typhoon areas, and 0.25 in other places.
⒉ Door and window structure waterproof design
(1) The principle of isobaric pressure is actively used in the structural design of aluminum alloy doors and windows, which is the most effective way to improve the waterproof and sealing performance of doors and windows.
(2) The overlap between the movable sash and the window frame should not be too small, and the overlap between the movable sash and the window frame of the casement window should not be less than 6mm.
(3) For high-rise buildings, cold areas and areas with high energy-saving requirements, try to adopt the structure of casement doors and windows, and use less or no sliding doors and windows. Since there is a large gap between the sliding sash and the upper and lower slide rails, and the two adjacent sashes are not on the same plane, there is no sealing and pressing force between the two sashes, and only the tops are used for overlapping and lap jointing. There are gaps between the tops, and the sealing effect is very weak, so the waterproof sealing performance of sliding doors and windows is very poor. The casement doors and windows are provided with 2 to 3 sealing rubber strips between the sash and the window frame. After the sash is closed and locked, the sealing rubber strips are pressed very tightly, and the middle cavity is easy to form an isobaric cavity, so it can be Design doors and windows with excellent sealing performance.
⑷The aluminum alloy glass pressing line of the glass for doors and windows should be designed in the indoor direction to avoid water seepage in the fine gap between the glass pressing line and the window frame.
⑸ Push-pull type doors and windows should be designed with a high enough water baffle on the indoor side, otherwise when the outdoor rainwater has a certain pressure, the rainwater will flow into the room through the water baffle.
⑹The upper part of the movable fan of doors and windows should be provided with a water drape, and the lower part should be provided with a drainage hole.
⑺ Combined doors and windows should minimize the exposed joints, because the small gaps cannot be sealed with sealant and leakage occurs. When the exposed seam cannot be avoided due to structural reasons, the two contact surfaces of the profiles at the seam will form a 90° angle, which is convenient for sealing with sealant.
  
Certificates and Honors
 

 
Factory display
 
 
 
 
 
Company Profile
 
Jiangyin Longkang Metal Products Co., Ltd. is located in Zhouzhuang Town, Jiangyin City - the largest aluminum extrusion profile production base. Covering an area of more than 35,000 square meters with more than 350 employees. We focus on metal customization, special-shaped aluminum profiles, aluminum profiles, aluminum tubes, rail transit series, doors and windows aluminum profiles, heat sinks, CNC processed aluminum profiles, interior decoration series, bending series, etc. We also have precision anodizing and various surface treatments, such as PVC film, wood grain, electrophoresis, powder coating, anodizing, etc. After more than 20 years of development, The company has become a modern aluminum production enterprise with perfect quality management system.
 
The company has the ability to develop and design molds independently, we can produce any extruded aluminum profiles according to your mechanical drawing or sample. Longkang has 10 extrusion production lines (600-3500 tons), one automatic oxidation electrophoresis production line, vertical and horizontal spraying production line per each, and a variety of advanced supporting production, processing and testing equipments. There are also CNT digital control drilling and milling machine(CNC), double head saw, hydraulic saw and punching machine in our processing workshop. The complete technological process can benefit to reduce the production turnover times for semi-finished products, to avoid the damage during transportation, improve the production efficiency, reduce the cost of production,and to ensure the quality and delivery time.
 
Efficiently treating our customers as partners with sincerity, specialization and satisfaction is our managerial principle. Attributed to the backup of a dedicated technical team, filled with wide and profound knowledge and practice in aluminum profile and world trade for 20 years, the company owns rich experience in product quality control and profile physical properties such as Hardness, Stretchability, Flatness, Straightness, and Tolerance etc. In line with the principle of sharing the preferential cost and joint development, the company has formed an interest community for years with its customers at home and abroad. Sincerely to build up a pleasant mutual trust, cooperative, win-win and value-added sustainable partnership is what we are achieving to grow together with you!
 
FAQ
 
Q: Can you send me the product catalog and price?
A: Leave your e-mail or other contact information, the product catalog will be provided here
The real-time price needs to confirm the specific product specifications and quantity, so the price can be calculated for you only when you provide drawings or plans, etc.
 
Q: Do you provide samples?
A: Yes (special customized samples need to provide drawings).
 
Q: What is the thickness of the anodizing? Can you do 12um?
A: Our normal thickness is about 10 um. Yes, we can do 15 microns and above.