T H L Shaped Aluminum Extrusion Profiles U Channel For Kitchen Cabinet 6060 6061

Product Specification

Aluminum L Profile For Casement Kitchen Cabinet Frame Aluminium Window Profiles
 
Basic Information

 
Product Display
 

 
Architectural design of doors and windows
Aluminum alloy doors and windows
Aluminum alloy doors and windows (5 photos)
Doors and windows are the unit of the building and the decorative symbol of the facade effect, which ultimately reflects the characteristics of the building. Although different buildings have different requirements for the design of doors and windows, and the size of doors and windows is ever-changing, some rules can still be found.
⒈ The door and window facade division should conform to the aesthetic characteristics, and the following factors should be considered in the division design
(1) The coordination of the division ratio. As far as a single glass plate is concerned, the aspect ratio should be as close to the golden ratio as possible, and it should not be designed into a square or a narrow rectangle with an aspect ratio of more than 1:2. too large or too small;
(2) The division of doors and windows should have certain rules and changes, and seek rules in the changes; the lines of the divisions have a degree of density; the division of equal distances and sizes shows rigor, solemnity, and seriousness; Division shows rhythm, liveliness and dynamism;
(3) At least the horizontal division lines of the doors and windows of the same room and the same wall should be on the same horizontal line as much as possible, and the vertical lines should be aligned as much as possible;
⑷When designing the facade of doors and windows, the overall effect requirements of the building should be considered, such as the contrast between the virtual and the real, the light and shadow effects, and the symmetry of the building.
⒉ Optional color of doors and windows (including the color of glass and profiles)
The selection of the color of doors and windows is an important part of the final effect of the building. The color of doors and windows should be matched with the characteristics of the building. When determining the color, it should be agreed with the architect, the owner and other parties.
⒊Personalized design of doors and windows
According to the different hobbies and aesthetic viewpoints of customers, unique door and window facade shapes can be designed.
⒋The permeability of doors and windows
It is best not to set horizontal frames and vertical frames on the facade of doors and windows within the line of sight height of the main viewing position (about 1.5m to 1.8m), so as not to block the line of sight. Some doors and windows need to use glass with high light transmittance or require a large open field of view, which is convenient for viewing the outdoor scenery.
⒌Lighting and ventilation of doors and windows
The ventilation area of ​​doors and windows and the number of movable fans should meet the requirements of building ventilation; at the same time, the lighting area of ​​doors and windows should also meet the requirements of the "Building Lighting Design Standards" (GB/T50033-2001) and the requirements of architectural design drawings. Article 4.2.4 of "Energy-saving Design Standards for Public Buildings" (GB 50189-2005) stipulates that the ratio of the window-to-wall area of ​​each orientation of the exterior windows of the building should not be greater than 0.70. When the window-to-wall area ratio is less than 0.40, the visible light transmittance of the glass should not be less than 0.4.
  
Certificates and Honors
 

 
Factory display
 
 
 
 
 
Company Profile
 
Jiangyin Longkang Metal Products Co., Ltd. is located in Zhouzhuang Town, Jiangyin City - the largest aluminum extrusion profile production base. Covering an area of more than 35,000 square meters with more than 350 employees. We focus on metal customization, special-shaped aluminum profiles, aluminum profiles, aluminum tubes, rail transit series, doors and windows aluminum profiles, heat sinks, CNC processed aluminum profiles, interior decoration series, bending series, etc. We also have precision anodizing and various surface treatments, such as PVC film, wood grain, electrophoresis, powder coating, anodizing, etc. After more than 20 years of development, The company has become a modern aluminum production enterprise with perfect quality management system.
 
The company has the ability to develop and design molds independently, we can produce any extruded aluminum profiles according to your mechanical drawing or sample. Longkang has 10 extrusion production lines (600-3500 tons), one automatic oxidation electrophoresis production line, vertical and horizontal spraying production line per each, and a variety of advanced supporting production, processing and testing equipments. There are also CNT digital control drilling and milling machine(CNC), double head saw, hydraulic saw and punching machine in our processing workshop. The complete technological process can benefit to reduce the production turnover times for semi-finished products, to avoid the damage during transportation, improve the production efficiency, reduce the cost of production,and to ensure the quality and delivery time.
 
Efficiently treating our customers as partners with sincerity, specialization and satisfaction is our managerial principle. Attributed to the backup of a dedicated technical team, filled with wide and profound knowledge and practice in aluminum profile and world trade for 20 years, the company owns rich experience in product quality control and profile physical properties such as Hardness, Stretchability, Flatness, Straightness, and Tolerance etc. In line with the principle of sharing the preferential cost and joint development, the company has formed an interest community for years with its customers at home and abroad. Sincerely to build up a pleasant mutual trust, cooperative, win-win and value-added sustainable partnership is what we are achieving to grow together with you!
 
FAQ
 
Q: Can you send me the product catalog and price?
A: Leave your e-mail or other contact information, the product catalog will be provided here
The real-time price needs to confirm the specific product specifications and quantity, so the price can be calculated for you only when you provide drawings or plans, etc.
 
Q: Do you provide samples?
A: Yes (special customized samples need to provide drawings).
 
Q: What is the thickness of the anodizing? Can you do 12um?
A: Our normal thickness is about 10 um. Yes, we can do 15 microns and above.