Round Aluminum Handrail Profiles Shower Extrusion Stair Railing T5-T8

Product Specification

Factory Cheap Price Deck Railing Aluminum Handrail Profiles For Pipe Line
 
Basic Information

 
Product Display
 

 

Comparison of the difference between aluminum alloy handle and zinc alloy handle, analysis of advantages and disadvantages, price description 1. Difference between aluminum alloy handle and zinc alloy handle, analysis of advantages and disadvantages: 1. Alloy handle and aluminum alloy handle. The main difference is the die-casting fee of zinc alloy handle It should be cheaper, and if the aluminum alloy is to be die-casted, the cost of the mold is a lot of money. 2. As far as the price of light products is concerned, aluminum alloy handles have advantages. For handles of the same size, zinc alloy is more than half heavier than aluminum alloy. And the later fee is added. Electroplating is more expensive than oxidation. Of course, if it is It is cheaper to use aluminum profiles. Aluminum alloys have good plasticity, but low strength, but their specific strengths are higher. They are suitable for medium structural materials that carry large weights. Both aluminum alloys and zinc alloys have good resistance to corrosion performance. 3. Zinc alloy has higher hardness and higher tensile strength than aluminum alloy, but there is no absolute limit. Aluminum alloy has low density, high hardness, and good tensile strength. Pick it up, the zinc alloy is heavier. 4. The finish of aluminum alloy is better. Zinc alloy of the same weight is cheaper than aluminum alloy. In fact, due to the high density of zinc alloy, the price of zinc alloy and aluminum alloy of the same volume is not much different. Compared with high-quality 304 stainless steel and copper, it is more cost-effective and more suitable for ordinary households. Aluminum alloy is not easy to be oxidized, but its hardness is not as good as that of zinc alloy. 5. Aluminum alloy has low density, but relatively high strength, close to or surpassing high-quality steel, good plasticity, can be processed into various profiles, has excellent electrical conductivity, thermal conductivity and corrosion resistance, widely used in industry, the amount used is only second in steel. If the structure and die casting process allow, of course, it is more cost-effective to use aluminum alloy. 6. The proportion of zinc alloy is about 2.5 times that of aluminum alloy, and the price is equivalent, so the material cost of zinc alloy is two or three times more expensive than that of aluminum alloy. Nowadays, many companies want to use aluminum alloys to replace zinc alloys in order to save costs, but some cannot be replaced, because the strength, hardness and formability of zinc alloys are much better than aluminum alloys. 7. If the surface of your product needs to be polished and electroplated, and requires high appearance quality, then you have to use zinc alloy. It is difficult for the aluminum alloy handle material to meet the high surface quality requirements, because the aluminum alloy die-casting performance is poor, and there are many pores on the surface of the product, and the surface quality is very poor after electroplating. 8. There are many specifications and uses of alloys. The price of copper is high, so that more than 70% of zinc alloy die-casting products are made of No. 3 zinc alloy, advanced hardware such as locks, or ordinary windows, electroplating and other industrial sectors. Aluminum alloys are generally used in chemical, tableware, electronic communications, electronics, aviation, machinery, spraying and chroming and other surface treatments, motorcycles. No. 3 zinc alloy electroplating, anti-theft windows, the products are widely used in automobiles, widely used in aerospace, electricians, ships. No. 3 zinc alloy castability and dimensional stability, mechanical parts such as instruments, accessories, and toy iron are easy to rust.

  
Certificates and Honors
 

 
Factory display
 
 
 
 
 
Company Profile
 
Jiangyin Longkang Metal Products Co., Ltd. is located in Zhouzhuang Town, Jiangyin City - the largest aluminum extrusion profile production base. Covering an area of more than 35,000 square meters with more than 350 employees. We focus on metal customization, special-shaped aluminum profiles, aluminum profiles, aluminum tubes, rail transit series, doors and windows aluminum profiles, heat sinks, CNC processed aluminum profiles, interior decoration series, bending series, etc. We also have precision anodizing and various surface treatments, such as PVC film, wood grain, electrophoresis, powder coating, anodizing, etc. After more than 20 years of development, The company has become a modern aluminum production enterprise with perfect quality management system.

 
Efficiently treating our customers as partners with sincerity, specialization and satisfaction is our managerial principle. Attributed to the backup of a dedicated technical team, filled with wide and profound knowledge and practice in aluminum profile and world trade for 20 years, the company owns rich experience in product quality control and profile physical properties such as Hardness, Stretchability, Flatness, Straightness, and Tolerance etc. In line with the principle of sharing the preferential cost and joint development, the company has formed an interest community for years with its customers at home and abroad. Sincerely to build up a pleasant mutual trust, cooperative, win-win and value-added sustainable partnership is what we are achieving to grow together with you!
 
The company has the ability to develop and design molds independently, we can produce any extruded aluminum profiles according to your mechanical drawing or sample. Longkang has 10 extrusion production lines (600-3500 tons), one automatic oxidation electrophoresis production line, vertical and horizontal spraying production line per each, and a variety of advanced supporting production, processing and testing equipments. There are also CNT digital control drilling and milling machine(CNC), double head saw, hydraulic saw and punching machine in our processing workshop. The complete technological process can benefit to reduce the production turnover times for semi-finished products, to avoid the damage during transportation, improve the production efficiency, reduce the cost of production,and to ensure the quality and delivery time.

FAQ
  

Q: What colors can powder coatings be used for? The thickness of the powder coat?
A: We can do any color for powder coating as long as you can provide color samples. Our usual powder coating thickness is 60-80um.

Q: What color can the wood grain be?
A: Our most popular colors are Western Red Cedar, Australian Cedar, Jarrah I, Jarrah II, Chestnut, Bush Cherry, Bush Wood, Western Wood, Snow Gum, etc. If you need any other color, we can provide the color according to you.