Pego Electronics (Yi Chun) Company Limited
| Payment Terms | T/T, PayPal |
| Delivery Time | 15 business days |
| Packaging Details | carton |
| Reference standard | IEC60884-1 clause 30.1 & figure 41 |
| Configuration | Hardness test stand, rectangular blade, round blade and load |
| Number of working stations | 2 |
| Application | to check if the material of pin-insulating sleeves can withstand the stresses to which it may be subjected at high temperature |
| Brand Name | Pego Electronics |
| Model Number | PG-PTA |
| Certification | Third-Lab Calibration Certificate |
| Place of Origin | China |
View Detail Information
Explore similar products
BS1363 Figure 30 Electrical Socket Tester Test Plug For Temperature Rising
IEC 60884-1 Figure 14 Device for Testing Non-Solid Pins to Verify the Mechanical
Withdrawal Force Plug Socket Tester Stainless Steel According To IEC60884-1 /
IEC60065 Plug In Socket Tester Torque Test Apparatus Device With BS/UL/AS/NZS
Product Specification
| Payment Terms | T/T, PayPal | Delivery Time | 15 business days |
| Packaging Details | carton | Reference standard | IEC60884-1 clause 30.1 & figure 41 |
| Configuration | Hardness test stand, rectangular blade, round blade and load | Number of working stations | 2 |
| Application | to check if the material of pin-insulating sleeves can withstand the stresses to which it may be subjected at high temperature | Brand Name | Pego Electronics |
| Model Number | PG-PTA | Certification | Third-Lab Calibration Certificate |
| Place of Origin | China | ||
| High Light | Pin-Insulating Sleeves Pressure Test Apparatus ，IEC 60884-1 Pressure Test Apparatus ，High Temperature Pressure Test Apparatus | ||
IEC 60884-1 Figure 41 Apparatus for Pressure Test at High Temperature for Testing Pin-Insulating Sleeves
1. Introduction
The high temperature pressure test apparatus conforms to the standard of IEC60884-1 clause 30.1 figure 41, IEC60598-2-20 clause 20.15, EN60811-3-1 and GB2099.1-2008 clause 30.1 figure 41 etc.. It’s used to the high temperature resistance test of the material of pin-insulating sleeves which occurred in conditions approaching bad connection conditions and at low temperatures in particular conditions of service. The apparatus consists of the hardness test rack, round blade, rectangular blade and load weight. 2.5N force is applied to specimen via blade, the apparatus with specimen is maintainted for 2 hours in a heating cabinet at a temperature of 200±5℃,the specimen is then removed from the apparatus within 10s, and cooled by immersion in cold water, the thickness of the insulation remaining at the point of impression is measured and shall not have been reduced by more than 50% of its original value measured at the start of the test.
2. Parameters
| Configuration | Hardness test stand, rectangular blade, round blade and load |
| Edge thickness | 0.7±0.01mm |
| Load | 2.5N weight |
| Number of working station | 2 |
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Exporter,Trading Company
Year Established:
2014
Ecer Certification：
Verified Supplier
Pego Electronics is founded by PEGO GROUP in 2011, a professional high-tech enterprise engaged in developing, marketing and service for electronic test equipment. Our business scope includes IP testing equipment, dust chamber, pendulum and vertical impact testing equipment, flame test apparatus,&nbs... Pego Electronics is founded by PEGO GROUP in 2011, a professional high-tech enterprise engaged in developing, marketing and service for electronic test equipment. Our business scope includes IP testing equipment, dust chamber, pendulum and vertical impact testing equipment, flame test apparatus,&nbs...
Get in touch with us
Leave a Message, we will call you back quickly!