Pego Electronics (Yi Chun) Company Limited
| Payment Terms | T/T |
| Supply Ability | 20 sets/month |
| Delivery Time | 20 working days |
| Packaging Details | wooden case |
| Standard | IEC60320-1 |
| Application | Appliance couplers testing |
| Power Supply | 220V, 50Hz |
| Heating Temperature | R.T.~180℃ |
| Multi-pin Gauge | Can be customized as per the standard sheet of connector/appliance outlet |
| Single-pin Gauge | Can be customized as per the standard sheet of connector/appliance outlet |
| Testing time | Settable |
| Warranty | 12 months |
| Brand Name | Pego |
| Model Number | PG-WDFA2 |
| Certification | Third-lab Calibration Certificate |
| Place of Origin | China |
View Detail Information
Explore similar products
Impact Test Equipment IEC 60320-1 60068-2-75 IK04 Spring Hammer for Testing
Appliance Couplers Testing Equipment IEC60320-1 Non-solid Pin Tester with
IEC60320-1 Free Fall Test Rotating Barrel with 5R/m Rotating Speed for Testing
IEC60320-3 High Precision Go And Not Go Gauges For Appliance Couplers Made Of
Product Specification
| Payment Terms | T/T | Supply Ability | 20 sets/month |
| Delivery Time | 20 working days | Packaging Details | wooden case |
| Standard | IEC60320-1 | Application | Appliance couplers testing |
| Power Supply | 220V, 50Hz | Heating Temperature | R.T.~180℃ |
| Multi-pin Gauge | Can be customized as per the standard sheet of connector/appliance outlet | Single-pin Gauge | Can be customized as per the standard sheet of connector/appliance outlet |
| Testing time | Settable | Warranty | 12 months |
| Brand Name | Pego | Model Number | PG-WDFA2 |
| Certification | Third-lab Calibration Certificate | Place of Origin | China |
| High Light | Appliance Couplers Force Testing Equipment ，Minimum Withdrawal Force Testing Equipment ，Maximum Withdrawal Force Testing Equipment | ||
The appliance couplers withdrawal force testing equipment is designed according to IEC60320-1 figure 3 and figure 4 and clause 16, for verification of the maximum and minimum withdrawal force of connector/appliance outlet. The minimum withdrawal force is verified by inserting the test pin gauge to each individual connector/appliance outlet. The equipment consists of control cabinet, mounting plate, heating device, appliance inlets/plug connector, mass hook, supplementary mass and principal mass. The height of the frame of the device is 550mm, and the distance between the axes of the two columns is 150mm. The appliance inlet / plug connector gauges made of hardened steel with roughness not exceeding 0.8mm.
Maximum withdrawal force: apply the maximum withdrawal force specified in the standard (the total force of the principal mass, the supplementary mass, the hook, and the appliance inlets/plug connector), the connector / appliance outlet shall not remain in the appliance inlet / plug connector.
* For testing the appliance couplers for hot conditions or very hot conditions, the heating function should be turned on and the maximum withdrawal force test should be started after reaching the specified temperature.
Minimum withdrawal force: Hand-held the specimen, and insert the test pin gauge of the minimum withdrawal force specified in the standard ( the total mass of the pin should be equal to the value specified in the standard) into each individual connector / appliance outlet, the gauge shall not fall from the contact assembly within 3s.
| Multi-pin gauge (for maximum withdrawal force test) | As per the standard sheet of connector/appliance outlet | ||||||||||||
| Single pin gauge (for minimum withdrawal force test) | As per the standard sheet of connector/appliance outlet | ||||||||||||
| Heating temperature | R.T.~180℃ (pre-settable) | ||||||||||||
| Mass configuration (maximum withdrawal force) | 45N*1 5N*1 4N*1, 6N*1
| ||||||||||||
| Mass configuration (minimum withdrawal force) | 1.5N*1, 2N*1 Notes: the mass of the single pin is counted into the corresponding mass | ||||||||||||
| Working power | AC220V±10%/50-60Hz | ||||||||||||
| Working condition | Temperature: 5-35℃, R.H.: 30%~90% | ||||||||||||
| Dimension and weight | W400mm*D300mm*H800mmm/40KG | ||||||||||||
Table 5- Maximum and Minimum Withdrawal Forces
| Type of connetor/appliance outlet | Withdrawal force (N) | |
| Multi-pin gauge Maximum | Single-pin gauge Minimum | |
| 0.2A, 2.5A, 6A and 10A | 50 | 1.5 |
| 16A | 60 | 2 |
The withdrawal force test device cconsists of frame, control cabinet, the mounting plate, heating device, appliance inlet/plug connector (multi-pin gauge maximum and single-in gauge), clamp, supplementary mass and principal mass. The frame is mate of steel, the supplementary mass. And the principal mass and the appliance inlet/plug connector (multi-pin gauge for maximum extraction test and single-pin gauge for minimum extraction test) are made of S16 anti-corrosion mirror steel which with magnetic and rust-proof characteristic. The appliance inlet/plug connector (multi-pin gauges) and single-pin gauges can be customized as per the standard sheet of connector/appliance outlet.
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Exporter,Trading Company
Year Established:
2014
Ecer Certification：
Verified Supplier
Pego Electronics is founded by PEGO GROUP in 2011, a professional high-tech enterprise engaged in developing, marketing and service for electronic test equipment. Our business scope includes IP testing equipment, dust chamber, pendulum and vertical impact testing equipment, flame test apparatus,&nbs... Pego Electronics is founded by PEGO GROUP in 2011, a professional high-tech enterprise engaged in developing, marketing and service for electronic test equipment. Our business scope includes IP testing equipment, dust chamber, pendulum and vertical impact testing equipment, flame test apparatus,&nbs...
Get in touch with us
Leave a Message, we will call you back quickly!