Pego Electronics (Yi Chun) Company Limited
| Payment Terms | T/T, Western Union, MoneyGram |
| Delivery Time | 15 working days |
| Packaging Details | Each packed in a wooden case |
| Max. voltage | 10KV |
| Tgδ range | no limit |
| Function | With CVT test function |
| Condition | New |
| Warranty | 12 months |
| Shipment | By express or air |
| Brand Name | Pego Tester |
| Model Number | HYGS |
| Certification | Third-lab calibration certificate |
| Place of Origin | China |
View Detail Information
Explore similar products
Portable Ratio Transformer Testing Equipment Three Phase With 200 MA Current
Power Transformer Testing Equipment Winding Deformation Smart DTL911-2004
9 KG Transformer Testing Equipment , Contact Resistance Meter 0.1μΩ Resolution
High Accuracy Transformer Testing Equipment , 7 Inch DC Resistance Meter
Product Specification
| Payment Terms | T/T, Western Union, MoneyGram | Delivery Time | 15 working days |
| Packaging Details | Each packed in a wooden case | Max. voltage | 10KV |
| Tgδ range | no limit | Function | With CVT test function |
| Condition | New | Warranty | 12 months |
| Shipment | By express or air | Brand Name | Pego Tester |
| Model Number | HYGS | Certification | Third-lab calibration certificate |
| Place of Origin | China | ||
| High Light | transformer testing machine ，transformer oil testing equipment | ||
10KV Tracnsformer Testing Equipment 50HZ Dielectric Loss Detector
I. Introduction:
Dielectric loss test is a effect way to detect the damp degeneration and local defect of electrical equipment insulation, it is used in transformer winding and bushing, current transformer, voltage transformer, breaker, high-tension switch, parallel capacitor, coupling capacitor and etc. Dielectric loss detector adopts frequency conversion power technology, and make use of single chip microcomputer and electronic technique to carry out automatic frequency conversion and data operation, to make the detector has the advantage of strong anti-interference, fast test speed, high accuracy, fully automatic digitization and simplification operation. Take the high power switch power supply to output 45Hz and 55Hz pure sine-wave, and automatic inflates, can supply 10KV voltage at most. Automatically filter 50Hz interference, it is suitable for site test of transformer substation.
2. Features:
1) Can test capacitance, dielectric loss and other parameters with high accuracy, can realize automatic test.
2) The equipment adopts frequency conversion technology to eliminate 50Hz power frequency, can get reliable data even in the environment of strong electromagnetic interference.
3) Easy to operate, user choose the appropriate test method, the test can finished under the control of microprocessor automatically.
4) Built-in standard capacitance and high-voltage power supply, easy to test at site and less wire connection.
5) With CVT test function, can realize CVT self-excitation method, no need external accessories, capacitance and dielectric loss of C1 and C2 can detect.
6) Adopts ivddv technology for grounded test objects.
7) Capacity of high voltage dielectric loss measurement function, can do the test of dielectric loss exceed 10KV by using high voltage transformer or series resonance.
8) Grounding protection function, when the equipment do not connect with ground wire or imperfect earth, it will enter into subnormal program, and will no output high-voltage. Over-current protection function, the equipment will not damage when EUT short circuit or break down.
9) Electric shock protection, if the user in the danger of electric shock, the equipment will cut off high voltage immediately to ensure the user safety.
3. Parameter:
| Accuracy | Cx: ±(reading*1%+1pF), tgδ: ±(reading*1%+0.0040) |
| Anti-interference index | frequency conversion anti-interference, can still reach above precision at 200% interference |
| Capacitance range |
3pF~60000pF/10kV 60pF~1μF/0.5kV (test with internal voltage) 3pF~1.5μF/10kV 60pF~30μF/0.5kV (test with external voltage) Resolution: 0.001pF |
| Tgδ range | no limit, resolution: 0.001%, capacitance, inductance and resistance auto identification |
| Test current range | 10μA～1A |
| Test with internal voltage |
Voltage setting range: 0.5~10KV Max current output: 200mA Test frequency: 45Hz, 50Hz, 55Hz, 60Hz, 65Hz (single frequency) 45/55Hz, 55/65Hz, 47.5/52.5Hz (Dual frequency) Frequency resolution: ±0.01Hz |
| Test with external voltage |
Max test current : 1A (measurement of ungrounded test object), power frequency or conversion frequency: 40~70Hz Max test current: 10KC/1A (measurement of grounded test object), power frequency or conversion frequency: 40~70Hz |
| CVT self-excitation low-voltage output | Output voltage: 3~50V, output current: 3~30A |
| Test time | about 40s (related to test mode) |
| Input power | 180V~270V (AC), 50Hz±1% (supply by city power or electric generator)
Printer: A7 micro-thermal printer |
| PC port | standard RS232 port |
| Working conditions | -10℃~50℃ (temperature), <90% (R.H.) |
| Dimension (mm) | 460*360*350 |
| Weight | 28KG |
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Exporter,Trading Company
Year Established:
2014
Ecer Certification：
Verified Supplier
Pego Electronics is founded by PEGO GROUP in 2011, a professional high-tech enterprise engaged in developing, marketing and service for electronic test equipment. Our business scope includes IP testing equipment, dust chamber, pendulum and vertical impact testing equipment, flame test apparatus,&nbs... Pego Electronics is founded by PEGO GROUP in 2011, a professional high-tech enterprise engaged in developing, marketing and service for electronic test equipment. Our business scope includes IP testing equipment, dust chamber, pendulum and vertical impact testing equipment, flame test apparatus,&nbs...
Get in touch with us
Leave a Message, we will call you back quickly!