Pego Electronics (Yi Chun) Company Limited
| Payment Terms | T/T, Western Union, MoneyGram |
| Delivery Time | 30 working days |
| Packaging Details | woodencase |
| Standard | GB17743, FCC, EN55015, GB4343 |
| Test Range | 9KHz~300MHz |
| Warranty | 12 months |
| Shippment | by express |
| Configuration | EMI receiver, LISN, Isolation Transformer, CDN, Attenuator |
| Working power | 220V/50Hz±10% |
| Brand Name | PEGO GROUP |
| Model Number | EMC500 |
| Certification | Third-lab Calibration Certificate |
| Place of Origin | China |
View Detail Information
Explore similar products
AC Sine Wave Voltage EMC Test Equipment Short Interruption Generator 50 Ms
1.2 / 50 μS EMC Test Equipment High Voltage Surge Generator 50 / 60 Hz
EMI EMC Test Equipment Conducted Interference System With 6 DB Attenuator
100KHz/0.5μs Ring Wave Generator 16A CDN for Simulating Oscillatory Transient
Product Specification
| Payment Terms | T/T, Western Union, MoneyGram | Delivery Time | 30 working days |
| Packaging Details | woodencase | Standard | GB17743, FCC, EN55015, GB4343 |
| Test Range | 9KHz~300MHz | Warranty | 12 months |
| Shippment | by express | Configuration | EMI receiver, LISN, Isolation Transformer, CDN, Attenuator |
| Working power | 220V/50Hz±10% | Brand Name | PEGO GROUP |
| Model Number | EMC500 | Certification | Third-lab Calibration Certificate |
| Place of Origin | China | ||
| High Light | emc test chamber ，emc testing services | ||
EMI Test System with 9KHz to 300MHz EMI Receiver and Artificial Mains Network
1. Introduction
Electromagnetic Interference (EMI) refers to the interference phenomenon caused by the action of electromagnetic waves and electronic components, includes conduction interference and radiation interference. Conducted interference refers to the coupling (interference) of signals on one electrical network to another electrical network through a conductive medium. Radiated interference means that the interference source couples (interferes) its signal to another electrical network through space. In high-speed PCB and system design, high-frequency signal lines, integrated circuit pins, various types of connectors, etc. may become antennas. A characteristic source of radiated interference that emits electromagnetic waves and affects the normal operation of other systems or other subsystems within the system.
The EMI test system includes:
| Name | Model | Description |
| EMI Conducted Interference Test System (Includes Artificial mains network (LISN), receiver, software) | EMC500 | Test range: 9K~300MHz. Among them, 30M~300MHz is radiation disturbance test for luminaire and household appliance. |
| Isolation Transformer | DAG | 500W-2 pieces, 1000W-1 pieces |
| Attenuator | CY371-2-4-20 | 20dB |
| CDN | CDN-M2 | Equip with EMC500 to test radiation disturbance |
| Attenuator | CY371-2-4-20 | 6dB |
2. Preparation:
1). Lab: no less than 4m*6m. As far as possible in the first floor, and there is wet mud outside the door all year round. Or there is water pipe with material of galvanization or cast iron, in order to use as a signal ground.
2). Test bench: 2 tables, one for EMC500, the other for computer and printer
3). Wooden bench: 1 wooden table for EUT with size of 1000mm*2000mm*400mm (W*L*H)
4). Aluminium plate: two pieces for reference plate with size of 2000mm*1000mm*(2~3)mm (L*W*thickness)
5). Insulating plate: 1 piece for EUT with size of 2000mm*1000mm*(10~14)mm (L*W*thickness)
6). Computer: 1 set with at least 1 RS232C port.
3. Specification
| Frequency sweep range | 9KHz~300MHz | |
| Peak value, quasi-peak value, average value level range | 20dBμV~120dBμV | |
| Scanning bandwidth | 9kHz~150kHz: 200Hz | |
| Scanning steps | 9kHz~150kHz:100Hz, 200Hz, 400Hz (optional) | |
| Test time | 9kHz~150kHz | 50~500ms (peak, settable) |
| 150kHz~30MHz | 5~500ms (average/peak, settable) | |
| 30MHz~300MHz | 2~500ms (average/peak, settable) | |
| Total uncertainty | ±3dB | |
| Input impedance | 50Ω | |
| Input signal (max) | 2V, protect at 5V | |
| Software | Built-in GB17743, FCC, EN55015, GB4343 standards, and support user-defined. | |
| Working power | 220V/50Hz±10% | |
4. Picture
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Exporter,Trading Company
Year Established:
2014
Ecer Certification：
Verified Supplier
Pego Electronics is founded by PEGO GROUP in 2011, a professional high-tech enterprise engaged in developing, marketing and service for electronic test equipment. Our business scope includes IP testing equipment, dust chamber, pendulum and vertical impact testing equipment, flame test apparatus,&nbs... Pego Electronics is founded by PEGO GROUP in 2011, a professional high-tech enterprise engaged in developing, marketing and service for electronic test equipment. Our business scope includes IP testing equipment, dust chamber, pendulum and vertical impact testing equipment, flame test apparatus,&nbs...
Get in touch with us
Leave a Message, we will call you back quickly!