Pego Electronics (Yi Chun) Company Limited
| Payment Terms | T/T, Western Union, MoneyGram |
| Supply Ability | 100 sets/months |
| Delivery Time | 7 working days |
| Packaging Details | carton |
| Test function | AC/DC withstand voltage test, insulation resistance test |
| Test range | 5KV/20mA (AC), 6KV/10mA (DC), 2.5KV/10GΩ |
| Arc detection | 1-9 |
| Accessories | test clips, HV probe |
| Working power | 220V/50Hz |
| Warranty | 12 months |
| Brand Name | PEGO Group |
| Model Number | HY9320 |
| Certification | Third-Lab Calibration Certificate |
| Place of Origin | China |
View Detail Information
Explore similar products
IEC60332-1 Single Wire Flammability Test Apparatus 45 Degree Burner Angle
Manual Electrical Safety Test Equipment Stainless Steel Inclined Plane Device
Cold Bend Test Apparatus SUS304 Electrical Safety Test Equipment
1.1m Length Luminaire / Short Circuit Test Chain 63%Cu 37%Zn Material IEC60598-1
Product Specification
| Payment Terms | T/T, Western Union, MoneyGram | Supply Ability | 100 sets/months |
| Delivery Time | 7 working days | Packaging Details | carton |
| Test function | AC/DC withstand voltage test, insulation resistance test | Test range | 5KV/20mA (AC), 6KV/10mA (DC), 2.5KV/10GΩ |
| Arc detection | 1-9 | Accessories | test clips, HV probe |
| Working power | 220V/50Hz | Warranty | 12 months |
| Brand Name | PEGO Group | Model Number | HY9320 |
| Certification | Third-Lab Calibration Certificate | Place of Origin | China |
| High Light | HY9320 hipot tester ，Insulating Resistance hipot tester ，HY9320 insulation tester | ||
HY9320 Insulating Resistance and Hipot Tester 2 in 1 equipment 0.1MΩ-10GΩ and 0-5KV/20mA
1. Introduction
HY9320 withstand voltage and insulation resistance tester is a kind of electric safety test equipment, it is widely used in the fields of household appliance, transformer, electric appliance, components and etc. to check the safety performance (voltage withstand test and insulation resistance test). The tester has the features of small volume, nice appearance and simple operation.
2. Features
● Meet the requirements of CCC, IEC, EN, VDE, BS, UL, JIS standards.
● 4.3 inch TFT-LCD display, simple panel operation
● Voltage ramp up, ramp down function. Holding time can be set arbitrarily for insulation resistance test.
● Preset up and lower alarming value, there is an audible and visual alarm when exceeds the limit
● The DC withstand voltage test has a rapid discharge function to avoid the danger of electric shock caused by the residual voltage
● With arc detection function
● The anti-electric wall technology detects the circuit at any time to prevent electric shock damage and ensure the safety of personnel
● Overvoltage, overcurrent protection, and has current clear function. Built-in cooling fan.
● It can store 20 test files, each file can store 20 test steps, and the test modes can be combined arbitrarily.
● Support SCPI and MODBUS two protocols, which is convenient for component automation test system.
3. Parameters
| Model | HY9320 | ||
| Withstand voltage test | |||
| Output voltage | AC | Output range | AC:0.050-5.000KV |
| Waveform | Sine-wave | ||
| Distortion | <3% | ||
| Operating Frequency | 50Hz/60Hz | ||
| Frequency Accuracy | ±1% | ||
| Output Power | 1000VA (5.000KV, 20mA) | ||
| Voltage Regulation | ±(1.0%+50V) | ||
| DC | Output range | DC:0.050~6.000KV | |
| Signal source frequency | 600Hz | ||
| Output power | 600VA (6.000KV, 10mA) | ||
| Voltage regulation | ±(1.0%+100V) | ||
| Voltage resolution | 1V | ||
| Voltage output accuracy | ±(1.0% setting+5V) (no-load) | ||
| Accuracy | ±(2%SV+5V) | ||
| Test current range | AC | Test range | 0.001mA-20mA |
| Short-circuit current | >40mA (Set output voltage>500V) | ||
| Current resolution | 0.001mA | ||
| Current accuracy | ±(2.0% reading+5digit) | ||
| actual current | OFF 0.001mA-20mA | ||
| DC | Test range | 0.1μA-20.00mA | |
| Current accuracy | ±(2.0% reading+5digit) | ||
| Discharge function | Automatic discharge after the test is over | ||
| Insulation resistance test | |||
| Output voltage | 0.050KV-2.500KV | ||
| Voltage resolution | 1V | ||
| Voltage accuracy | ±(1.0% reading+2V) | ||
| Maximum output current | 10mA | ||
| Maximum output power | 25VA (2500V/10mA) | ||
| Output instantaneous short-circuit current | >20mA (set output voltage>500V) | ||
| Load regulation | ≤1% (rated power) | ||
| Ripple (1KV) | ≤3% (1KV, no-load) | ||
| Discharge function | Automatic discharge after the test is over | ||
| Test resistance | 0.1MΩ-10GΩ | ||
| Resistance display range | 10mA: 0.1MΩ-0.5MΩ 2mA: 0.5MΩ-5MΩ 200μA: 5MΩ-50MΩ 20μA: 50MΩ-500MΩ 2μA: 500MΩ-10GΩ | ||
| Resistance measurement accuracy | ≥500V 1MΩ-1GΩ±(5%reading+5digit) 1GΩ-10GΩ±(10%reading+5digit) <500V 0.1MΩ-1GΩ±(10%reading+5digit) 1GΩ-10GΩ | ||
| Current measurement accuracy | ±(1.5% reading+5 digit) | ||
| Arc detection | OFF class 1-9 | ||
| Current upper limit | 0.001mA-20mA(AC), 0.1μA-10mA(DC) | ||
| Current lower limit | 0.001mA-20mA(AC), 0.1μA-10mA(DC) | ||
| Resistance upper limit | OFF, 0.1MΩ-10GΩ | ||
| Resistance lower limit | 0.1MΩ-10GΩ | ||
| discriminant output | LCD display PASS/FAIL, sound alarming | ||
| Voltage sag time | 0s-999.9s | ||
| Voltage holding time | 0.3s-999.9s (for DC withstand voltage test only) | ||
| Accuracy of timer | ±(0.2% setting value±0.1s) | ||
| Storage and interface | 20 test files, each file can have 20 test steps USB host (support 128g max.) | ||
| Control interface | HANDLER, SINGAL | ||
| Protocol | SCPI, Modbus RTU | ||
| Communication Interface | RS232C, LAN | ||
| Accessories | Test fixutres, HV probe, fuse, power cable | ||
| Working Power | 220V, 50Hz/60Hz | ||
| Dimension | L283mm*D432*H108mm | ||
| Weight | 13KG | ||
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Exporter,Trading Company
Year Established:
2014
Ecer Certification：
Verified Supplier
Pego Electronics is founded by PEGO GROUP in 2011, a professional high-tech enterprise engaged in developing, marketing and service for electronic test equipment. Our business scope includes IP testing equipment, dust chamber, pendulum and vertical impact testing equipment, flame test apparatus,&nbs... Pego Electronics is founded by PEGO GROUP in 2011, a professional high-tech enterprise engaged in developing, marketing and service for electronic test equipment. Our business scope includes IP testing equipment, dust chamber, pendulum and vertical impact testing equipment, flame test apparatus,&nbs...
Get in touch with us
Leave a Message, we will call you back quickly!