Pego Electronics (Yi Chun) Company Limited
| Payment Terms | T/T, Western Union, MoneyGram |
| Supply Ability | 50 sets/month |
| Delivery Time | 7-15 working days |
| Packaging Details | woodencase |
| Standard Conform to | ISO6722-1 clause 5.12.4.1 figure 6 |
| Application | for testing auto cable resistance to sandpaper abrasion |
| Sandpaper Applied to test | 150J garnet sandpaper tape |
| Configured mass | 50g, 100g, 200g, 500g,1500g |
| Allowable Dimameter of Cable | no more than 15mm |
| Working power | AC220V/50Hz or customized |
| Brand Name | PEGO Electronics |
| Model Number | PG-SDA |
| Certification | Third-Lab Calibration Certificate |
| Place of Origin | China |
View Detail Information
Explore similar products
IEC60332-1 Single Wire Flammability Test Apparatus 45 Degree Burner Angle
Manual Electrical Safety Test Equipment Stainless Steel Inclined Plane Device
Cold Bend Test Apparatus SUS304 Electrical Safety Test Equipment
1.1m Length Luminaire / Short Circuit Test Chain 63%Cu 37%Zn Material IEC60598-1
Product Specification
| Payment Terms | T/T, Western Union, MoneyGram | Supply Ability | 50 sets/month |
| Delivery Time | 7-15 working days | Packaging Details | woodencase |
| Standard Conform to | ISO6722-1 clause 5.12.4.1 figure 6 | Application | for testing auto cable resistance to sandpaper abrasion |
| Sandpaper Applied to test | 150J garnet sandpaper tape | Configured mass | 50g, 100g, 200g, 500g,1500g |
| Allowable Dimameter of Cable | no more than 15mm | Working power | AC220V/50Hz or customized |
| Brand Name | PEGO Electronics | Model Number | PG-SDA |
| Certification | Third-Lab Calibration Certificate | Place of Origin | China |
| High Light | Sandpaper abrasion test apparatus ，ISO6722-1 abrasion test apparatus ，Auto Cable abrasion test apparatus | ||
Apparatus for Sandpaper Abrasion Test as Per ISO6722-1 for Testing Auto Cable
1. Standard conforms to
ISO6722-1 clause 5.12.4.1 figure 6, GB/T25085, QC/T730, JASO D608, JASO D611, SAE J1127, SAE J1128 and JIS C3406 standard.
2. Application
The abrasion test is only applicable to cables with a conductor size≤6mm²,and it is intended to verify that the sistance of the cable insulation to abarsion mees the customer requirements. A test sample of 1m in length and remove 25mm of insulation from each end.
3. Working principle
Measure the “resistance to sandpaper abrasion” using 150J garnet sandpaper tape with 5mm to 10mm conductive strips perpendicular to the edge of the sandpaper spaced a maximum of every 75mm. Exert a force of (0.63±0.05)N on the test sample by the combination of the bracket, support rod and pivoting arm, the total vertical force exerted on the test sample shall be the combination of the force exerted by the bracket, pivoting arm, support rod and additional mass. Mount the test sample taut, without stretching, in a horizontal position using an area of the sandpaper abrasion tape not previously used. Place the additional mass and bracket on top of the test sample. Draw the sandpaper abrasion tape under the test sample at a rate of (1500±75)mm/min and record the length of sandpaper abrasion tape necessary to expose the conductor. Move the test sample 50mm and rotate the test sample clockwise 90°. Repeat the procedure for a total of four reading. The mean of the readings shall determine the resistance to sandpaper abrasion.
4. Specification
| Test station | 1, each time test one sample |
| Test Sample size | Diameter ≤15mm, length 1m |
| Clamp | Left and right clamps, distance between clamp is 700mm |
| Sandpaper tape | 150J garnet sandpaper tape, total length 5m, width 20mm |
| Speed of sandpaper tape | 100mm/min and 1500mm/min selectable |
| Sandpaper tape abrasion travel | 0-4000mm settable |
| Angle between sandpaper tape and sample | 29±2° |
| Weight | Support rod + bracket=64.26g, equip with 50g, 100g, 200g, 500g,1500g weight (or can be customized) |
| Power supply | AC 220V, 0.5KW |
5. Production Details
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Exporter,Trading Company
Year Established:
2014
Ecer Certification：
Verified Supplier
Pego Electronics is founded by PEGO GROUP in 2011, a professional high-tech enterprise engaged in developing, marketing and service for electronic test equipment. Our business scope includes IP testing equipment, dust chamber, pendulum and vertical impact testing equipment, flame test apparatus,&nbs... Pego Electronics is founded by PEGO GROUP in 2011, a professional high-tech enterprise engaged in developing, marketing and service for electronic test equipment. Our business scope includes IP testing equipment, dust chamber, pendulum and vertical impact testing equipment, flame test apparatus,&nbs...
Get in touch with us
Leave a Message, we will call you back quickly!