Payment Terms | LC T/T |
Supply Ability | 5000 pieces/year |
Delivery Time | 15 DAYS |
Packaging Details | wood |
Usage | Power,Distribution Transformer |
Phase | Three |
Frequency | 50/60Hz |
Rated capacity | high |
Type | Oil Immersed,Oil type,oil immersed current transformer 132kv |
Product name | 35kv, 110kv |
Material | Copper+alumnium |
Vector group | Dyn11/Yzn11 |
Winding material | Cooper |
Brand Name | HENGFENGYOU |
Model Number | S11 |
Certification | ISO IEC CB COC KEMA SNI SABS CCC |
Place of Origin | China |
View Detail Information
Explore similar products
SH15 Series Oil Immersed Transformer Amorphous Alloy Full Sealed 3 Phase 11Kv
Large Capacity Electrical Power Transformer Three Phase High Voltage Reliable
10KV power Transformer, Oil Immersed , S9/S10/S11 800KVA With Full Sealed
Cooper Winding Material Oil Immersed Transformer Oil Filled Electric Transformer
Product Specification
Payment Terms | LC T/T | Supply Ability | 5000 pieces/year |
Delivery Time | 15 DAYS | Packaging Details | wood |
Usage | Power,Distribution Transformer | Phase | Three |
Frequency | 50/60Hz | Rated capacity | high |
Type | Oil Immersed,Oil type,oil immersed current transformer 132kv | Product name | 35kv, 110kv |
Material | Copper+alumnium | Vector group | Dyn11/Yzn11 |
Winding material | Cooper | Brand Name | HENGFENGYOU |
Model Number | S11 | Certification | ISO IEC CB COC KEMA SNI SABS CCC |
Place of Origin | China | ||
High Light | oil immersed distribution transformer ,oil immersed power transformer |
S9 S11 Three Phase Oil Immersed Type Transformer Oil-Filled Electric Transformer Oil cooled power transformer
·Product introduction
On the basis of S9 series, the no-load loss of S11 series products is reduced by 30% on average, and the no-load current is 70-80% lower than that of S9. The core is made of imported high magnetic conductivity, low loss, cold-rolled high-quality silicon steel sheet, which reduces the no-load loss and saves energy significantly.
High safety and reliability, advanced structure, small volume, light weight, low noise, low temperature rise, anti-corrosion, reliable anti leakage measures, to prevent oil leakage.
·Service conditions
The altitude shall not exceed 1000m
Ambient temperature: - 10 ℃ ~ + 40 ℃
Ceiling Monthly Average temperature: + 30 ℃
Maximum annual average temperature: + 20 ℃
Daily temperature difference: 25 ℃
Seismic crack degree: 8 degrees
Relative humidity: 95% (+ 25 ℃)
· Structural features:
1. The transformer core is made of imported high-quality cold-rolled silicon steel sheet, which greatly reduces no-load loss and no-load current. The core is tightly bound to ensure the compactness and reduce noise.
2. The high and low voltage windings are made of oxygen-free copper. The low voltage winding of 500KVA and below is of double-layer cylinder structure, of 630kVA and above adopt double helix or four helix structure. High-voltage winding adopts multi-layer cylinder structure.
3. Dyn11 is used in the transformer connection group to reduce the influence of harmonics on the power grid and improve the quality of power supply.
4. The transformer is a fully sealed structure, with three coats of primer and one coat of finish paint applied on the inner and outer surfaces. The product is salt fog proof, moisture proof and fungus-proofing, beautiful, durable and reliable
5. The measured noise value is lower than the standard and maintenance free under normal operation.
Note: Due to continuous product improvement, the dimensions provided in this sample are for reference only. If necessary, our company can design and produce according to user requirements. Please contact the company in time.
Main technical parameters | ||
Main circuit rated voltage(V) | .......................... | Ac 400 (600) |
Rated voltage of auxiliary circuit (V) | .......................... | Ac 220/380 (400) dc 110/220 |
Rated frequency (Hz) | .......................... | 50(60) |
Rated insulation voltage(V) | .......................... | 690(1000) |
Rated current(A) | The level of bus | ≤6000 |
Rated short-time bus withstand current (kA/1s) | .......................... | 50,80 |
Rated peak withstand current of bus (kA/0.1s) | .......................... | 105,176 |
Power frequency test voltage (V/1min) | main circuit | 2500 |
Auxiliary circuit | 1760 | |
bus | Three-phase four-wire system | A,B,C,PEN |
Three-phase five-wire system | A,B,C,PE,N | |
Protection grade | .......................... | IP30 |
·Order instructions:
1. The customer needs provide main parameters of the transformer (input and output voltage, capacity, loss, etc.)
2. Other customer requirements
Company Details
Business Type:
Manufacturer,Exporter,Trading Company,Seller
Year Established:
2008
Total Annual:
3000-5000
Employee Number:
100~200
Ecer Certification:
Active Member
Qingdao Hengfengyou Electrical Engineering Co., LTD., subordinate to Hengfengshuai Group, is an export-oriented enterprise with transmission and distribution industry as its main business, integrating product research and development, manufacturing and trade. Its main product... Qingdao Hengfengyou Electrical Engineering Co., LTD., subordinate to Hengfengshuai Group, is an export-oriented enterprise with transmission and distribution industry as its main business, integrating product research and development, manufacturing and trade. Its main product...
Get in touch with us
Leave a Message, we will call you back quickly!