Low Noise Fluid Heat Exchanger High Power Stainless Steel Heat Exchanger

Product Specification

Easy Installation Explosion-proof electric heater with small volume and high heating power

Product description

Explosion-proof electric heaters are a type of equipment that converts electricity into thermal energy for use in explosion-proof applications. It is used for heating, holding and heating liquid or gaseous, solid, solid medium in flow or static.

The fluid explosion-proof electric heater converts electrical energy into heat energy to heat the material to be heated. In the work, the low-temperature fluid medium enters its input port under the action of pressure through the pipeline, and flows along the specific heat exchange inside the electric heating vessel, and uses the path designed by the fluid thermodynamics principle to take away the high-temperature heat energy generated in the work of the electric heating element, so that The temperature of the heated medium rises, and the electric heater outlet obtains the high temperature medium required by the process. The electric heater internal control system automatically adjusts the electric heater output power according to the temperature sensor signal of the output port, so that the medium temperature of the output port is uniform; when the heating element is overheated, the independent overheat protection device of the heating element immediately cuts off the heating power source to avoid Overheating of the heated material causes coking, deterioration, and carbonization. In severe cases, the heating element burns out, effectively extending the service life of the electric heater.

Feature

1. It can realize the uninterrupted transmission of the internal high temperature voltage system. Ensure that the high-temperature voltage system inside the electric heating device uses electric energy to obtain a higher temperature energy. It satisfies the high temperature heating requirements of the medium during operation, so that its effect can be maximized.

2. The equipment has the advantages of precise structure, light weight, light weight and convenient installation process. It does not cause any harmful pollution to the surrounding environment when heated, and can obtain a relatively high heating temperature and efficiency at a relatively low working pressure.

3. High intelligent standards. The relevant technical personnel of China Electric Heater Network adopts the advanced intelligent heating working mode, that is, the original temperature in the working is set by the high temperature voltage medium inside the gas electric heater. In the experiment, this temperature control precision It can reach the range of ±2 °C ~ ± 0.2 °C.

4. The internal high-voltage system of such equipment can provide the DCS system with alarm signals such as running, high temperature, fault, and outage, and can also accept the operation signal such as automatic signal and shutdown of DCS, and the electric heater system. A reliable and safe monitoring device has been added, but the price reference for this electric heater is relatively high.

5. The electrical equipment has multiple associated interfaces, and the temperature of the heat transfer oil pump, the heat transfer oil, and the internal high temperature voltage can be effectively monitored at any time. Therefore, the idealized reform of the explosion-proof electric heater is more energy-efficient, environmentally friendly and more efficient.

Specification

Application

1. Heating of chemical materials in the chemical industry, some powder drying under certain pressure, chemical process and spray drying.

2. Hydrocarbon heating, including petroleum crude oil, heavy oil, fuel oil, heat transfer oil, lubricating oil, paraffin oil, etc.

3. Process water, superheated steam, molten salt, nitrogen (air) gas, water gas, etc., which are heated by heating.

4. Zone 1, Zone 2 hazardous gas sites;

5. Group IIA, IIB T1~T4 explosive gas or steam environment.

6. Due to the advanced explosion-proof structure, the equipment can be widely used in chemical, military, petroleum, natural gas, offshore platforms, ships, mining areas and other places where explosion protection is required.