White Low Flow Mini Vacuum High Pressure Dc Water Pump 3V/4.5V/6V/9V/12V

Product Specification

3V/4.5V/6V/9V/12V low flow low cost white mini vacuum motor dc motor pump

Micro pumps for pumping are divided into two categories: gas sampling pumps and micro vacuum pumps. Although they are usually referred to simply as miniature vacuum pumps without distinction, they are different from each other in a technical point of view and should be chosen with special attention.

In short, the gas sampling pump can only carry a small load (i.e., the pump suction end’s resistance can not be too big, but the price is cheap; in the strict sense, the miniature vacuum pump can carry a large load (the suction end allows large resistance, or even completely clogged up, but the price is slightly higher. The resistance of the pump can be measured by means of instrument. Comparing it with the por of maximum allowable resistance of air inlet in the pump's technical parameter, we can know whether the type selection is appropriate or not. It is usually determined by a simple method based on experience. For example, the following conditions are of high load (that is, the pumping end of the pump has greater resistance and can only be selected within the scope of the miniature vacuum pump):

1. At the pumping end of the pump to be connected to a very long pipe, or pipe bending points, severe bending will even block closed, or the pipe has a very small hole (for example, less than φ 2 mm);

2. There are throttle valves, solenoid valves, air path switches, filters and other components on the pipeline;

3. The pump outlet is connected with the closed container, or the container is not airtight but the air intake is small;

4. The pump outlet is connected with the closed container, or the container is not airtight but the air intake is small;

5. The pumping end of the pump is connected to the filter container, which is used to speed up liquid filtration.

 
Remark: Usually our pump has 5 kinds of voltage:3V,4.5V,6V, 9V and 12V.
When you choose pump, you can tell me the pump's voltage you need.
We can do it for you.

mini vacuum motor's details:

Our company offers multiple component configurations allowing piston pump to be used for either vacuum operation, pressure operation, or alternating vacuum and pressure operations.The innovative, compact design incorporates leading edge technologies that allow it to operate harder, quieter and longer, reliable, highly efficient.

Its flow can deliver up to 2 L/min and 4L/M.

Usually our pump has 5 kinds of voltage:3V,4.5V,6V, 9V and 12V .

When you choose pump, you can tell me the pump's voltage you need.

We can do it for you.

You can choose pump according to our model.

In addition,it can be mounted in any position.

mini vacuum motor's features

1. Uncontaminated flow.

2. Non-metallic construction.

3. Oil-Free, Corrosion resistant

4.Long life,High efficiency

5. Compact size, Low Weight

6. Low noise level&vibration

7. Maintenance free

8. High level of air tightness thanks to the closed

diaphragm surface and special sealing system.

9. Can operate in any installed position.

mini vacuum motor's application

1. breast pump

2. Beauty equipment

3. Vacuum packaging machine

4. Double-headed electric breast pump

5. Portable ozone sterilizer

6. Vacuum sealing machine

7. Beauty massage

mini vacuum motor's demension

mini vacuum motor's packing and shipping

Packaging:

CTN/PCS: 150PCS

G.W. : 10 KG

DIMENSION : 47 * 31 * 25 CM

DIMENSION : 47 * 31 * 25 CM

We can ship pumps to you by sea, by air or by express.
By sea: cheap but long
By air: quick but a a little expensive
By express: door to door, 3-5days to your country by DHL/UPS/FEDEX/TNT and others.

The fastest, but most expensive.
You can choose according to your needs.

mini vacuum motor's picture

 

Working principle: the rotary motion of the motor turn into the swing of connecting rod which makes the diaphragm up and down motion. In the process of the downward movement of the diaphragm, pump cavity will suck medium through the inlet valve; Upward movement of the diaphragm, pump cavity press out media through the outlet valve. Mechanical transmission parts and pump cavity is isolated by diaphragm. Diaphragm pump does not need oil for auxiliary lubricating, in the process of transmission, extraction and compression of medium.

 

Company Information

 

Founded in 1999,yanhua Micro pump Technology company is the leading and biggest manufacturer specializing in various DC micro pump and fluid comprehensive solution in China.

Our sale engineers team have more than 15years overseas experience in customer service,especially like OEM and ODM, and successful service for several fortunes 1000companies, can provide immediate and rapid solution and satisfactory answer to the clients.

Over 15 years’ experience in overseas customer service without complaint.

Engineers’ on-site service and quick solutions.Professional sales engineer to provide free technical support and solve problems with 24hours.

We have obtained the ISO9001 certification, and our products comply with the EU RoHS Directive and REACH regulations, FDA certification. Some of our products have WARS, NSF approval.

Today, Yanhua have 12 production lines and 300 skilled workers, our monthly producton capacity is 500,000pcs brushless and brush dc pumps,100,000 piston pumps and 10,000 gear pump and water pump.

Certifications

Why choose us?

(1) Various pumps in no MOQ and competitive prices.

(2) Professional website platform and one-to-one online service.

(3) We are factory. And we have our own professional R&D department. We accept the order if you want to customize products or design the product.

(4) Fast delivery for normal order, for the bulk quantity, it depends on your specific requirement.

(5) Products are all covered with warranty and insurance.