24V DC Compressor Electric Vacuum Pump High Flow Low Heat With Brush Motor

Product Specification

24v dc electric compressor electric vacuum pump high flow with brush motor

Judging the working condition of exhaust end of 24v dc electric compressor

The above problem is to discuss the suction end resistance of the pump. According to these conditions, the range of selection has been reduced, but the problem of exhaust end resistance must be considered. In this way, the optional range can be determined.

In practical application, the exhaust condition of the micro vacuum pump is different: one is that the exhaust is very smooth and goes straight to the atmosphere; the other is the high exhaust resistance, such as valves, small bends, and large damping sensors on the exhaust pipe road, Non-specific silencers, exhaust below liquid level, gas to airtight or semi-closed containers, etc. In modern design and manufacture, the micro vacuum pump with different exhaust conditions is treated differently. " The parameter of the maximum resistance Por value "is to calibrate the exhaust capacity of the pump, so we can use strict technical means to determine whether the type selection is appropriate or not."

According to the above steps, we have been able to determine the selection range of the micro pump. The allowance should be left for the selection of the attention parameters, especially the flow parameters. After the pump is connected to the gas path system, the pressure loss will be caused by the pipeline, valve and other gas elements, so the flow rate is smaller than the nominal flow rate of the pump, and some problems related to the selection of the pump are listed below, which are considered according to the application situation.

pump's features

1. High temperature performance, good consistency

2. Oil resistance and easy installation

3. DC brush motor

4. Long life span, low heat.

5. Heavy duty work for 24 hours and Continuous operation

6. The key parts are imported

7. Can work for long hours

24v dc electric compressor's model code

According to above picture, you know how our model codes are produced.
You can know our pump more clearly and choose the pump more easily.

Working principle: the rotary motion of the motor turn into the swing of connecting rod which makes the diaphragm up and down motion. In the process of the downward movement of the diaphragm, pump cavity will suck medium through the inlet valve; Upward movement of the diaphragm, pump cavity press out media through the outlet valve. Mechanical transmission parts and pump cavity is isolated by diaphragm. Diaphragm pump does not need oil for auxiliary lubricating, in the process of transmission, extraction and compression of medium.

24v dc electric compressor's dimension

Unlabeled tolerance is ± 0.1mm.
 

Pump Size:66*85.5*116mm

Pump Weight:600g;

Outlet:OD 13.2mm, silicone hose suggestion:ID 12mm

Materials:pump body: PC/PPS, diaphragm: EPDM

Because we use imported ball bearing,the pump’s performance is stable and high.

The membrane is made by EPDM and pump's body is made by special PC/PPS which make pump well endurance and strong chemical resistance.

24v dc electric compressor's application

Our products can meet the specific needs of different clients. The products are mainly used in medical cosmetology, household electronic appliances, food and beverage, health,instrument,chemical instrumentation. The car and laboratory and other industries. The products are mainly exported to korea, Japan,southeast Asia, Australia, Europe and other countries.

24v dc electric compressor's packing and shipping

1. The stock samples can be sent to you within 3-5 days by international express after received

2. The batch order can be shipped to you in about 30-40days after order confirmation (by air or by

sea)

We only produce pump.
We strive for almost 20 years just to produce a better pump.
So we are professional in producing pump.
Please remember our name: Shenzhen Yanhua Faith Pump
 

Why choose us?

(1) Various pumps in no MOQ and competitive prices.

(2) Professional website platform and one-to-one online service.

(3) We are factory. And we have our own professional R&D department. We accept the order if you want to customize products or design the product.

(4) Fast delivery for normal order, for the bulk quantity, it depends on your specific requirement.

(5) Products are all covered with warranty and insurance.