Hongkong Dongwe Technologies Co., Ltd
| Place of Origin | China |
| Brand Name | DONGWE |
| Certification | CE, FCC, RoHS |
| Model Number | DW-D96C47-80C |
View Detail Information
Explore similar products
10Gbase-ER SFP+ Optical Transceivers Module SFP-10G-ER
10G,single fiber,1330nm/1270nm,60km,Fiber Optic Module Transceiver, SFP+
SFP+ DWDM 80KM,10G, 1556.55nm, Optic Module / Transceiver compatible with Cisco
SFP+ DWDM 80KM,10G, 1553.33nm, Optic Module / Transceiver compatible with Cisco
Product Specification
| Place of Origin | China | Brand Name | DONGWE |
| Certification | CE, FCC, RoHS | Model Number | DW-D96C47-80C |
Absolute Maximum Ratings
| Parameter | Symbol | Min | Max | Unit |
| Supply Voltage | Vcc | -0.5 | 3.8 | V |
| Storage Temperature | Tst | -40 | 85 | ºC |
| Relative Humidity | Rh | 0 | 85 | % |
| Parameter | Symbol | Min | Typical | Max | Unit |
| Supply Voltage | Vcc | 3.13 | 3.3 | 3.46 | V |
| Supply current1] | Icc | - | 360 | 450 | mA |
| Operating Case temperature | Tca | -5 | - | 70 | ºC |
| Module Power Dissipation | Pm | - | 1.2 | 1.5 | W |
Transmitter Specifications – Optical
| Parameter | Symbol | Min | Typical | Max | Unit |
| Center Wavelength | lc | 1464.5 |
| 1617.5 | nm |
| Center wavelength stability
| DlD | -6.5 | lc | 6.5 | nm |
| Spectral Width (-20dB) | Δλ20 | - | - | 0.3 | nm |
| Average Optical Power | Po | 0 | - | +3 | dBm |
| Side Mode Suppression Ratio | SMSR | 30 | - | - | dB |
| Optical Transmit Power (disabled) | PTX_DISABLE | - | - | -30 | dBm |
| Extinction Ratio | ER | 8.2 | - | - | dB |
| Relative Intensity Noise | RIN | - | - | -128 | dB/Hz |
| Optical Return Loss Tolerance | Orl | - | - | 21 | dB |
| Parameter | Symbol | Min | Typical | Max | Unit |
| Input Operating Wavelength | λ | 1260 | - | 1600 | nm |
| Average receive power | Pavg | -15.8 | - | -1.0 | dBm |
| Receiver sensitivity in 10.3Gbps(OMA) | Rsen1 | - | - | -14.1 | dBm |
| Stressed receiver sensitivity in 10.3Gbps(OMA) | Rsen2 | - | - | -11.3 | dBm |
| Reflectance | Rrx | - | - | -26 | dB |
| LOS Asserted | Lsa | -28 | - | - | dBm |
| LOS De-Asserted | Lda | - | - | -19 | dBm |
| LOS Hysteresis | Lh | 0.5 | - | - | dB |
| Parameter | Symbol | Min | Typical | Max | Unit |
| Data Rate | Mra | - | 10.3 | 11.3 | Gbps |
| Input differential impedance | Rim | - | 100 | - | Ω |
| Differential data Input | VtxDIFF | 120 | - | 850 | mV |
| Transmit Disable Voltage | VD | 2.0 | - | Vcc3+0.3 | V |
| Transmit Enable Voltage | Ven | 0 | - | +0.8 | V |
| Transmit Disable Assert Time | Vn | - | - | 100 | us |
| Parameter | Symbol | Min | Typical | Max | Unit |
| Data Rate | Mra | - | 10.3 | 11.3 | Gbps |
| Differential Output Swing | Vout P-P | 350 | - | 850 | mV |
| Rise/Fall Time | Tr / Tf | 24 | - | - | ps |
| Loss of Signal –Asserted | VOH | 2 | - | Vcc3+0.3- | V |
| Loss of Signal –Negated | VOL | 0 | - | +0.4 | V |
| Parameter | Symbol | Min. | Max | Unit | Notes |
| Accuracy | |||||
| Transceiver Temperature | DMI_Temp | -3 | +3 | degC | Over operating temp |
| TX Output optical power | DMI_TX | -3 | +3 | dB |
|
| RX Input optical power | DMI_RX | -3 | +3 | dB | -3dBm to -12dBm range |
| Transceiver Supply voltage | DMI_VCC | -0.08 | +0.08 | V | Full operating range |
| Bias current monitor | DMI_Ibias | -10% | 10% | mA |
|
| Dynamic Range Accuracy | |||||
| Transceiver Temperature | DMI_Temp | -5 | 70 | degC |
|
| TX Output optical power | DMI_TX | -1 | +2 | dBm |
|
| RX Input optical power | DMI_RX | -18 | 0 | dBm |
|
| Transceiver Supply voltage | DMI_VCC | 3.0 | 3.6 | V |
|
| Bias current monitor | DMI_Ibias | 0 | 100 | mA |
|
| Pin | Symbol | Name/Description |
| 1 | VEET [1] | Transmitter Ground |
| 2 | Tx_FAULT [2] | Transmitter Fault |
| 3 | Tx_DIS [3] | Transmitter Disable. Laser output disabled on high or open |
| 4 | SDA [2] | 2-wire Serial Interface Data Line |
| 5 | SCL [2] | 2-wire Serial Interface Clock Line |
| 6 | MOD_ABS [4] | Module Absent. Grounded within the module |
| 7 | RS0 [5] | Rate Select 0 |
| 8 | RX_LOS [2] | Loss of Signal indication. Logic 0 indicates normal operation |
| 9 | RS1 [5] | Rate Select 1 |
| 10 | VEER [1] | Receiver Ground |
| 11 | VEER [1] | Receiver Ground |
| 12 | RD- | Receiver Inverted DATA out. AC Coupled |
| 13 | RD+ | Receiver DATA out. AC Coupled |
| 14 | VEER [1] | Receiver Ground |
| 15 | VCCR | Receiver Power Supply |
| 16 | VCCT | Transmitter Power Supply |
| 17 | VEET [1] | Transmitter Ground |
| 18 | TD+ | Transmitter DATA in. AC Coupled |
| 19 | TD- | Transmitter Inverted DATA in. AC Coupled |
| 20 | VEET [1] | Transmitter Ground |
[1] Module circuit ground is isolated from module chassis ground within the module.
[2].should be pulled up with 4.7k – 10k ohms on host board to a voltage between 3.15Vand 3.6V.
[3]Tx_Disable is an input contact with a 4.7 kΩ to 10 kΩ pullup to VccT inside the module.
[4]Mod_ABS is connected to VeeT or VeeR in the SFP+ module. The host may pull this contact up to Vcc_Host with a resistor in the range 4.7 kΩ to10 kΩ.Mod_ABS is asserted “High” when the SFP+ module is physically absent from a host slot.
[5] RS0 and RS1 are module inputs and are pulled low to VeeT with > 30 kΩ resistors in the module.
You may also interested in other products:
SFP-10G-LR
GLC-LH-SM
Multiplexer 1*8, Passive CWDM
Fiber Media Converter,
Fiber Patch Cord
http://www.fiber-optics-e.com/sell-1377086-dongwe-patchcord.html
Company Details
Business Type:
Manufacturer
Year Established:
2013
Total Annual:
10,000,000-20,000,000
Employee Number:
150-200
Ecer Certification：
Active Member
Welcome to HK DONGWE. We mainly sell Fiber Optics products like: Optic Module/transceiver-1G SFP (SX,LX,EX,ZX), 10G SFP+, XFP (SR, LR, ER, ZR, LRM), 40G QSFP etc, Fiber media converter, PLC Splitter, Fiber Patch cord/Pigtail, DWDM, CWDM, ... Welcome to HK DONGWE. We mainly sell Fiber Optics products like: Optic Module/transceiver-1G SFP (SX,LX,EX,ZX), 10G SFP+, XFP (SR, LR, ER, ZR, LRM), 40G QSFP etc, Fiber media converter, PLC Splitter, Fiber Patch cord/Pigtail, DWDM, CWDM, ...
Get in touch with us
Leave a Message, we will call you back quickly!