Lemin Plastics Mould Factory
| Place of Origin | Zhejiang |
| Brand Name | Lemin |
| Model Number | 1cavity,2cavity,3cavity,4cavity |
View Detail Information
Explore similar products
Double Station Extrusion blow molding machine LM2S2L
Double Station Extrusion blow molding machine LM2S5L
Double Station Extrusion blow molding machine
Double Station Extrusion blow molding machine LM2S12L
Product Specification
| Place of Origin | Zhejiang | Brand Name | Lemin |
| Model Number | 1cavity,2cavity,3cavity,4cavity |
1).The screw adopts high potency melt to make sure the material well mixed.
2).Adopt frequency control of motor system to reduce the power consumption.
3).Adopt horizontal movement frame to improve stability and speed.
4).The oil cylinder is in the center of the moldboard, uniform stress for quality products and increase life span.
5).High stench guild rod controller the mold open and clamp, to enhance the steadily and high efficiency.
6).The extrusion head use spreader or screw type to well mixed the thickness and easy to change different color.
7).Advanced design to eliminate the melt material degrade in the runner, to avoid the perform draw-down and the welding line.
8).The precise time control system assured good quality, suitable weight and reduces production cycle.
9).Freely to move the extrusion foundation backward or forward to make the exchange of the mold easy.
10).Multi-function bottom blowing type for shaped products.
11).The mechanical arm can take out the product automatically.
| Model No. | Unit | LM-S120L | LM-160L | LM-S260L |
| Max.Product Volume | L | 120 | 160 | 250 |
| Dry cycle | pc/h | 360 | 300 | 300 |
| Screw Diameter | mm | 100 | 120 | 120 |
| Screw L/D ratio | L/D | 24～26 | 24～26 | 24～26 |
| Screw motor power | Kw | 45～75 | 90 | 90～132 |
| Screw heating capacity | Kw | 8.4～10.5 | 12.1～14 | 22 |
| No. of heating zone | Zone | 4～5 | 6 | 6 |
| Output of HDPE | Kg/hr | 200～280 | 250～350 | 450 |
| Oil pump drive power | Kw | 37 | 37 | 45 |
| Clamping force | KN | 440～650 | 740～850 | 900 |
| Mold stroke | mm | 500～1400 | 600～1500 | 720～1800 |
| Size of Mold | (W*H)mm | 900×1450 | 900×1450 | 900×1450 |
| Max.die diameter | mm | 420 | 510 | 600 |
| Die heat capacity | Kw | 10.8 | 12 | 15 |
| Capacity | L | 12.8 | 18 | 22 |
| Blowing pressure | Mpa | 0.8 | 0.8 | 0.8 |
| Air Volume | M＾3/Min | 1.6 | 1.6 | 1.6 |
| Cooling water pressure | Mpa | 0.3 | 0.3 | 0.3 |
| Water consumption | L/min | 150 | 180 | 250 |
| Weight of machine | Ton | 17 | 19 | 35 |
| Size of machine(L*W*H) | m | 5.2×2.5×4.2 | 5.8×2.6×4.4 | 7.8×2.9×5.4 |
Company Details
Business Type:
Manufacturer
Total Annual:
70% - 80%
Employee Number:
11-50
Ecer Certification：
Active Member
Taizhou Lemin Plastics Mould Factory located in Zhejiang Huangyan “The town of Mould”. As the development, we are dealing moulds tgether with plastic injection molding machine, stretch injection blow molding machine and extrusion blow molding machine for many years. in ... Taizhou Lemin Plastics Mould Factory located in Zhejiang Huangyan “The town of Mould”. As the development, we are dealing moulds tgether with plastic injection molding machine, stretch injection blow molding machine and extrusion blow molding machine for many years. in ...
Get in touch with us
Leave a Message, we will call you back quickly!