Payment Terms | T/T, Western Union, Paypal |
Supply Ability | 1000 PCS Per 7 Days |
Delivery Time | 7- 15 Days |
Capacity | Bunchy:12-96 cores、Ribbon:72-288 cores |
Diameter | φ20mm |
Number of Ports | 2 In 2 Out |
Dimension | 370mm×178mm×106mm |
Model Number | FOSC-H2A |
Place of Origin | Zhejiang, China |
Brand Name | DOWELL |
View Detail Information
Explore similar products
2 in 2 Out Fiber Optic Joint Termination Enclosure Box 24 Core 48 Core 96 Core
Inline Type Fiber Optic Splice Closure PC PC Or ABS 96 Fibers Wall-mounting
Mechanically Sealed Pre Connected Horizontal Connector Cable Box 96 Cores Black
Max 144 Fiber Capacity Fiber Optic Joint Enclosure Dome Type Heat shrinkable
Product Specification
Payment Terms | T/T, Western Union, Paypal | Supply Ability | 1000 PCS Per 7 Days |
Delivery Time | 7- 15 Days | Capacity | Bunchy:12-96 cores、Ribbon:72-288 cores |
Diameter | φ20mm | Number of Ports | 2 In 2 Out |
Dimension | 370mm×178mm×106mm | Model Number | FOSC-H2A |
Place of Origin | Zhejiang, China | Brand Name | DOWELL |
Horizontal Fiber Optic Splice Closure 2 In 2 Out Underground wall-mounting
Horizontal type fiber closure is like a flat or cyclindrical. This type of fiber splice closure is the most commonly used one in mounted aerials or buried underground. Usually contains one or more fiber splice trays to provide space and protection for fiber optic splices. The scope of application is: aerial, underground, wall-mounting, duct-mounting, handhole-mounting. The ambient temperature ranges from -45℃ to +65℃.
Dimension And Capacity
Outside dimension (LxWxH) | 370mm×178mm×106mm |
Weight (excluding outside box) | 1900-2300g |
Number of inlet/outlet ports | 2 (pieces) on each side (total 4 pieces) |
Diameter of fiber cable | φ20mm |
Capacity of FOSC | Bunchy:12-96 cores,Ribbon:72-288 cores |
Necessary Tools For Installation
1 | Pipe cutter | 4 | Band tape |
2 | Crossing/Paralleling screwdriver | 5 | Electrical cutter |
3 | Wrench | 6 | Stripper |
The process of installing FOSC
Type 1. In the optical cable opening of the end of the 50mm to keep the strengthening of the reinforcement bar.
Type 2. Will need to be fused to disconnect the cable from the middle
Type3. Install and lock the cable in the cable sheath and attach the cable to the cable.
Type 4. With electrical tape to the optical cable hoop protruding part of the tight.
Type 5. Select the outer diameter of the cable slightly larger than the sealing clip ring to cut off. Place the end part of the rubber strip in the middle of the two sealing ring and use the finger to put the glue on the cable. To maintain the natural state of the adhesive tape or a slight force, in order to make the wrapped layers of adhesive layers of clothing, no obvious gap.
Type 7. Cable coil stripping, stored into the connection box before the space in the tower
Type 8. On the first disc groove along the fiber protection groove after hot melt pipe Around. In case of need, the remaining length can be as shown in Figure ten Word direction coil.
Type 9. To bind the connecting plate on the connecting plate holder with a fixed strap (which is face up) with a continuous disk.
Type 10. Close the upper and lower cover in proper order with the box body fastening buckle.
Company Details
Business Type:
Manufacturer
Year Established:
2016
Total Annual:
10000000-50000000
Employee Number:
101~120
Ecer Certification:
Verified Supplier
DOWELL Factory Display We have two subcompanies, one is SHENZHEN DOWELL INDUSTRIAL Which produce Fiber Optic Series and another is NINGBO DOWELL TECH which produce Drop Wire Clamps and Copper Telecom Series. Our products are related to whole cabling system, such as FTTH Cabling, Distribuctio... DOWELL Factory Display We have two subcompanies, one is SHENZHEN DOWELL INDUSTRIAL Which produce Fiber Optic Series and another is NINGBO DOWELL TECH which produce Drop Wire Clamps and Copper Telecom Series. Our products are related to whole cabling system, such as FTTH Cabling, Distribuctio...
Get in touch with us
Leave a Message, we will call you back quickly!