Full Automatic Non Woven High Speed N95 Mask Making Machine

Product Specification

Full Automatic Non Woven High Speed N95 Mask Making Machine
 
 
 
The KN95 and N95 mask machine composed of non woven roll rack and forming system. The forming system includes embossing, pressing, cutting and conveying.The rollers on the rack can be adjusted to match the forming system. The machine has high efficiency and less waste, which steadily speeds up the collection and conveying of the mask body. The rack and forming system matching nose bridge insert and ear loop welding machine can make up a complete processing line, which improves productivity and benefit to create greater profits.
 
Main function
 
high-speed full-automatic one-tow-two mask machine is mainly composed of the body machine, the flap conveying line and two ear band welding machines.After the machine outputs the mask body, the conveyor belt structure transmits the mask body piece to the turnover mechanism. The mask disc is flipped onto the conveyor belt connected to the ear strap machine by a flip mechanism, then the mask sheet will be transported to the front of the ear belt machine above the mask plate through the conveyor belt, place the mask sheet into the mask plate of the earband machine by pressing down the cylinder, subsequent welding of the ear bands of the mask by the ear band machine, to complete the production of a flat outer ear mask product, the layout of the automatic line is as follows,the whole line is one - tow - two structure.
 
Product Features
 
1. Aluminium alloy structure is adopted, which is beautiful and firm without rust.
2. Computer PLC (Mitsubishi PLC) programming control, high stability, low failure rate and low noise.
3. Servo motor imported from Taiwan, stepper motor drive, high precision.
4. Photoelectric detection of raw materials to avoid mistakes and reduce waste.
5. The machine adopts pulleys and fixed feet, which is convenient and fast to move, strong fixation, and does not shake.
 
Technical parameters
 
Imput raw materials, automatic feeding, nose line cutting / feeding, hemming welding, folding scene, forming welding, photoelectric detection, automatic slicing, finished product output, receiving tray sorting, full automation
 

 
equipment use matters needing attention:
The machine should be installed on a flat and solid ground, and sufficient operation and maintenance space should be reserved around the machine

• Environmental conditions

1. Temperature: The normal ambient temperature must be 5°C ~ 40°C.
2. Humidity: 30% ~ 90%.
3. Keep away from paint (gasoline), chemicals, acid, alkaline and explosive or flammable materials.
4. Avoid neighbouring machines that can cause vibration. Ambient lighting: above 300LUX
 

• Installation notes

1. After the machine is positioned, adjust the foot cup of the machine and use the horizontal auxiliary tool until it is adjusted to the level.
2. Connect the power cord. This machine uses 220V single-phase, 50HZ power. It is strictly prohibited to connect 380V or other power sources that do not meet the requirements. Please pay special attention to the user! To ensure safety, the connection work must be completed by an electric professional, and a connection cable is provided. If self-equipped power plug is used, 2.5mm2 three-core cable must be used to correctly connect live wire (L), neutral wire (N) and ground wire (E).