Powder Coating Spray Booth Dust Control 1.8mm Galvanized Sheet Load Bearing

Customized Spray Paint Booth Oven Electrostatic Painting Equipment Coating Vehicle
 
Key parts
 
1. Walls & Ceiling
- High-quality high-temperature resistant fireproof basalt rock wool board, plate thickness 50mm, double-sided 0.4/0.4mm steel plate, rock wool density 120kg/m³
- High-quality galvanized sheet bending and fastening
2. Basement system
- The surrounding is made of high-quality galvanized sheet.
- The load-bearing bracket is 1.8mm galvanized sheet with convex steel structure welded
- Steel grilles(30*4mm flat iron and 8 #threaded steel welding)*2rows
- Non-slip boards(painted by the tread plate)*3rows
3. Heating system
- Use far infrared heating
- The far-infrared electric heating pipes are fixed on both sides of the barn and at the rear
- Far infrared electric heater total power: 30KW, divided into 3 channels.
 
Paraments
 
Booth Dimensions
- Internal Size
6900×4000×2800 mm (L×W×H)
- External Size
(without metal basement)
7010×5650×3460 mm (L×W×H)
Foundation and Floor
- Loading Capacity of Galvanized Grating
650 kg/wheel
- Surface Area
2 rows of grids, 3 rows of checkered steel plates
- Metal Basement
350 mm Height, optional mounting with or without civil work
Fixed metal support
- Drive-in Ramps
2 units
Wall and Door
- Wall Panel
0.426 mm thickness galvanized steel plate
Double wall panels of galvanized steel sheet, thickness 50 mm, inside and outside white, insulated with Rock-wool, with tongue and groove interlocking System
- Roof Panel
0.426 mm thickness galvanized steel plate
Double wall panels of galvanized steel sheet, thickness 50 mm, inside and outside white, insulated with Rock-wool, with tongue and groove interlocking System
- Entry Door
1 Unit, 3200×2700 mm (W×H), 2+1 panels folded structure, size 800×500 mm observation windows with tempered glass
- Operator’s Door
1 Unit, 800×2000 mm (W×H) , observation windows with tempered glass
Pressure lock
Lighting
- Ceiling Lightings
8 Units, each 4×18 W, total 576 W, LED lamps
- Side Lightings
Exclude
- Brightness
> 800 Lux
- Protection Level
IP55
Filtration
- Pre-filter
Fiberglass, double filters, plate filter + pockets filter
- Ceiling Filters
EU5 Fine Filters, 6 Units
- Floor Filters
Fiberglass, Paint-Stop-Filters
- Activated Carbon Filter Cabinet
Exclude
Ventilation System
- Direct Drive Motor
(Fresh Air)
1×7.5 kW, 970 rpm, 380 V, 50 Hz, 3Ph, CE standard
- Direct Drive Motor
(Exhaust Air)
1×7.5 kW, 970 rpm, 380 V, 50 Hz, 3Ph, CE standard
- Fan Capacity
25,000m³/h, 650 Pa
- Air Flow Speed (no load)
+/- 0.25 m/s in empty
- Energy Recycling Cabinet
Exclude
- Air Ducts
8 meters straight ducts, 2 elbows, 2 reducers
Heating System
- Heating Exchanger
Stainless Steel 1Gr18Ni9Ti SUS304
- Heating Exchange capacity
200 kW (174,000 kcal/h)
- ΔT Temperature Increasing Capacity
20 °C (from -5°C to 15°C in painting phase)
- Max. Drying Temperature
80 °C
- Heating time
5-10 min (from 20 to 60°C in drying phase)
- Heating Type
Diesel burner, RIELLO G20 (optional gas burner)
Control Board
- Standard
In line with the European standard, Y-Δ soft start
- Function
Painting (Warm painting), Leveling, Drying, Light switch, Emergency stop, Failure warn, etc.
- Main Component
First quality brands like SIEMENS, OMRON, SCHNEIDER, etc.
- Control Mode
Traditional switch control panel
- Frequency Inverter
Exclude
- Self-protect Function
Overpressure Manometer, Safety Thermostat For Heating and Ventilator
Total Power
~ 14 KW