Henan Wein Industry Co., Ltd.
| Payment Terms | L/C, T/T |
| Delivery Time | DEPEND ON ORDERED QUANTITY |
| Packaging Details | bundled with steel belts or in bulk |
| Material | Ductile Iron |
| Color | Black |
| Product name | Iso2531 C25 C30 C40 Ductile Iron Pipe |
| External coating | Zinc + Bitumen Painting |
| Internal coating | Mortar Cement Lining/High alumina cement mortar lining |
| Test | 100% Water Pressure Test |
| Model Number | DN80-2600 |
| Certification | ISO2531,EN545/598,WRAS,SGS |
| Place of Origin | CHINA |
View Detail Information
Explore similar products
ISO 2531 Class K9 Ductile Iron Tube With External Zinc Spaying Bitumen Coating
Heat Treatment Ductile Iron Pipe Cement Lined K789 Or C253040 Class 450mm
6M Cement Lined Ductile Iron Pipe Zinc Spraying With ISO2531 Standard
BSEN598 Internal Cement Lined Pipe Ductile Iron Centrifugal Cast For water
Product Specification
| Payment Terms | L/C, T/T | Delivery Time | DEPEND ON ORDERED QUANTITY |
| Packaging Details | bundled with steel belts or in bulk | Material | Ductile Iron |
| Color | Black | Product name | Iso2531 C25 C30 C40 Ductile Iron Pipe |
| External coating | Zinc + Bitumen Painting | Internal coating | Mortar Cement Lining/High alumina cement mortar lining |
| Test | 100% Water Pressure Test | Model Number | DN80-2600 |
| Certification | ISO2531,EN545/598,WRAS,SGS | Place of Origin | CHINA |
| High Light | cement mortar lining steel pipe ，cement mortar lined ductile iron pipe | ||
High Strength Ductile Iron Cement Lined Pipe ISO2531 BSEN545 BSEN598 SGS
Cement Lined Ductile Iron Pipe overview:
Ductile cast iron is kind of alloy of iron, carbon and silicon, in which graphite exists in the type of spherical, generally the size of graphite is 6-7 class, and spheriodization grade of the pipe should be controlled 1-3 class(spheroidization rate is not below 80%). Thus after spheroidization, ductile cast iron possesses the nature of iron as well as the characteristic of steel. After annealing, its microstructure contains ferrite and a little pearlite possessing excellent mechanical properties.
Specifications:
1) The standard of pipe: EN598,ISO 2531, EN545 , .
2) Pipe class: K/Cetc.
3) Pipe joint:T-type, K type joint, self-restrained joint
4) Internal lining: cement mortar lining as per ISO4179
5) Zinc coating: at least 130g/m2 as per ISO 8179
6) DN 80 - 2,600 mm
7) Bitumen painting: at least 70um as per ISO 8179
8) Gaskets are NBR rubber, natural rubber, SBR rubber or EPDM rubber ring as per ISO4633
9) DN 80 - 2,600 mm
10) High strength, lighter than gray iron, good corrosion resistance, no furring, small flow resistance, easy fixing, long life time
11) Checked by automatic inspection equipment
12) Mechanical properties
a) Tensile strength: ≥420MPa
b) Yield strength: ≥300Mpa
c) Hardness: ≤230HB
d) Elongation%: DN80 - 1000 ≥10 DN1200 - 2200 ≥7
External coating: Ductile iron pipeline systems can be installed in a wide range of external operating environments, these environments can be characterized according to their aggressively. Pipes shall normally be delivered internally and externally coated. Ductile iron pipeline systems can be installed in a wide range of external operating environments. Coatings specified by relevant International Standards are available as specified.
Internal lining:Ductile iron pipeline systems can be used to convey a wide range of raw waters and potable waters. These internal environments can be characterized by their aggressively. Relevant factors to be considered for cement mortar linings without seal coats are given; Linings specified by relevant International Standards are available as specified.
Packing: bundled with steel belts or in bulk
Shipment: in bulk or container
mechnical behavior:
| Ductile cast iron pipe | Common ash cast pipe | Steel pipe | ||
| Tensile strength(MPa) | ≥420 | 150--260 | ≥400 | |
| Ductility(%) | <1000(mm) | ≥10 | Neglected | ≥18 |
| >1000(mm) | ≥7 | Neglected | ≥18 | |
| Brinell hardness(HBS) | ≤230 | ≤230 | about 140 | |
| After annealing,the microstructure of ductile cast iron pipes is ferrite and a little pearlite,possessing excellent mechanical properties. | ||||
| The hydraulic test pressure of the ductile cast iron pipes is as follows: | |
| Nominal diameter(mm) | Hydraulic test pressure(MPa) |
| 80≤DN≤300 | 5.0 |
| 350≤DN≤600 | 4.0 |
| 700≤DN≤1000 | 3.2 |
| 1100≤DN≤2000 | 2.5 |
Usage:
Much of the production of ductile iron is in the form of ductile cast iron pipe, used for water and sewer lines. Ductile cast iron pipe is stronger and easier to tap, requires less support and provides greater flow area compared with pipes made from other materials like PVC, concrete, polyethylene or steel. Ductile Iron Pipe is the most widely-used pipeline product in water supply and water drain/sewage projects.
Our advantages:
There are lots of qualified managers and technicians, and a well-trained team of after-sales service, which provides all services of manufacture, package, transportation and installation. We are looking forward to cooperating with friends from abroad and home creating a brighter future.
Company Details
Business Type:
Manufacturer,Importer,Exporter,Seller
Year Established:
2004
Total Annual:
5000000-10000000
Employee Number:
>100
Ecer Certification：
Active Member
HENAN WEIN INDUSTRY CO.,LTD. is located in the famous commercial and historical city—Zhengzhou, and its registered capital is RMB 5,000,000 Yuan.WEIN is a joint-stock company, which focuses on ductile iron pipes & fittings both in domestic and overseas market. Our company offers h... HENAN WEIN INDUSTRY CO.,LTD. is located in the famous commercial and historical city—Zhengzhou, and its registered capital is RMB 5,000,000 Yuan.WEIN is a joint-stock company, which focuses on ductile iron pipes & fittings both in domestic and overseas market. Our company offers h...
Get in touch with us
Leave a Message, we will call you back quickly!