Henan Wein Industry Co., Ltd.
| Payment Terms | L/C, T/T |
| Delivery Time | DEPEND ON ORDERED QUANTITY |
| Packaging Details | bundled with steel belts or in bulk |
| Pipe wall thickness | C |
| Application | water |
| Yield (≥ mpa) | 420Mpa |
| Hardness | 230HB |
| Joint type | T-type |
| length | 6 ，5.7,5.5 |
| Model Number | DN80-2600 |
| Certification | ISO2531,EN545/598,WRAS,SGS |
| Place of Origin | CHINA |
View Detail Information
Explore similar products
ISO 2531 Class K9 Ductile Iron Tube With External Zinc Spaying Bitumen Coating
Heat Treatment Ductile Iron Pipe Cement Lined K789 Or C253040 Class 450mm
6M Cement Lined Ductile Iron Pipe Zinc Spraying With ISO2531 Standard
High Strength Ductile Iron Cement Lined Pipe ISO2531 BSEN545 BSEN598 SGS
Product Specification
| Payment Terms | L/C, T/T | Delivery Time | DEPEND ON ORDERED QUANTITY |
| Packaging Details | bundled with steel belts or in bulk | Pipe wall thickness | C |
| Application | water | Yield (≥ mpa) | 420Mpa |
| Hardness | 230HB | Joint type | T-type |
| length | 6 ，5.7,5.5 | Model Number | DN80-2600 |
| Certification | ISO2531,EN545/598,WRAS,SGS | Place of Origin | CHINA |
| High Light | cement mortar lining steel pipe ，cement lined steel pipe | ||
ISO4179 Cement Lined Ductile Iron Pipe External Zinc and bitumen coating as per ISO8179
Ductile Iron Pipe overview:
Dutile iron pipe under EN598 standard shall be delivered with an external coating of zinc with finishing layer and an internal lining of high alumina cement mortar,This shall not preclude special coating arrangements for products which deviate from the requirements for specific design reasons. Pipes for sewers and drains shall be identified externally by one of the following colours: brown, red or grey. This is to allow easy identification of installed sewers and drains. Pipes specifically intended for rain water or surface water sewers (separate systems) may be identified by a different colour other than those used for potable water pipes.The iron thickness of fittings used for pressure sewers shall be in accordance with EN 545, The iron thickness of fittings used for gravity sewers shall be equal to or higher than those of pipes of the same DN.
Specifications:
Table 1 — Limit deviation on internal diameter
|
DN |
Limit deviation a mm |
| 80 to 1000 | - 10 |
| 1100 to 2000 | - 0,01 DN |
| a The lower limit only is given. | |
Pipes shall be supplied to the standardized lengths given in Table 2.
Table 2 — Standardized length of socket and spigot pipes
|
DN |
Standardized length Lu a m |
| 80 to 600 | 3 or 5 or 5,5 or 6 |
| 700 to 800 | 5,5 or 6 or 7 |
| 900 to 1400 | 6 or 7 or 8,15 |
| 1500 to 2000 | 8,15 |
Pipes shall be designed to a length taken in the range: standardized length plus or minus the permissible deviation; they shall be manufactured to this design length plus or minus the limit deviation .
The manufacturer shall make the information available as to his design lengths.
The length shall be measured according to 6.1.4 and shall be within the limit deviations.
Of the total number of socket and spigot pipes to be supplied in each diameter, the percentage of shorter pipes shall not exceed 10 %, in which case the length reduction shall be:
Packing: bundled with steel belts or in bulk
Shipment: in bulk or container.
Usage:
Much of the production of ductile iron is in the form of ductile cast iron pipe, used for water and sewer lines. Ductile cast iron pipe is stronger and easier to tap, requires less support and provides greater flow area compared with pipes made from other materials like PVC, concrete, polyethylene or steel. Ductile Iron Pipe is the most widely-used pipeline product in water supply and water drain/sewage projects.
Our advantages:
There are lots of qualified managers and technicians, and a well-trained team of after-sales service, which provides all services of manufacture, package, transportation and installation. We are looking forward to cooperating with friends from abroad and home creating a brighter future.
Company Details
Business Type:
Manufacturer,Importer,Exporter,Seller
Year Established:
2004
Total Annual:
5000000-10000000
Employee Number:
>100
Ecer Certification：
Active Member
HENAN WEIN INDUSTRY CO.,LTD. is located in the famous commercial and historical city—Zhengzhou, and its registered capital is RMB 5,000,000 Yuan.WEIN is a joint-stock company, which focuses on ductile iron pipes & fittings both in domestic and overseas market. Our company offers h... HENAN WEIN INDUSTRY CO.,LTD. is located in the famous commercial and historical city—Zhengzhou, and its registered capital is RMB 5,000,000 Yuan.WEIN is a joint-stock company, which focuses on ductile iron pipes & fittings both in domestic and overseas market. Our company offers h...
Get in touch with us
Leave a Message, we will call you back quickly!