Down The Hole DTH Button Bits DTH hammer Bits DTH Drill Bits DTH Bits

Product Specification

Down The Hole DTH Button Bits DTH hammer Bits DTH Drill Bits DTH Bits

Product specifications:

All products are compatible with many products manufactured by , Atlas Copco, etc, all our products are widely used in mining, tunneling, quarrying, construction, and civil engineering project.

DTH bits
1. manufacture as your requirement
2. bit diameter, face shape
3. carbide button shape
4. number of air hole

Bit face shape selection:

1. Drop Center Bit

For high penetration rates in soft to medium hard and fissured rock formations. Low to medium air pressures. Maximum hole deviation control.

2. Concave Face

The all-round application bit face specifically for medium hard and homogenerous rock formations. Good hole deviation control and good flushing capacity.

3. Convex Face

For high penetration rates in soft to medium-hard with low to medium air pressures. It is the most resistance to steel wash, and may reduce the load and wear on the gauge buttons, but poor hole deviation control.

4. Double Gauge Face

This kind of face shape is suitable for fast penetration rates in medium to hard rock formations. Designed for high air pressures and good resistance to steel wash step gauge bit.

5. Flat Face Bit

This kind of face shape is suitable for hard to very hard and abrasive rock formations in applications with high air pressures. Good penetration rates an resistance to steel wash.

Carbife button shape selection:

1. Domed/Round Button

Domed/Round Buttons are usually used as gauge buttons of DTH Bits, suitable for every abrasive and very hard formations.

2. Parabolic/Semi-Ballistic Buttons

Parabolic Buttons are usually used as gauge buttons and front buttons of DTH Bits, suitable for medium abrasive and hard formations.

3. Ballistic Button

Ballistic Buttons are usually used as front buttons of DTH Bits, suitable for medium abrasive and mesium hard formations. They can also be used as gauge buttons if the rock is soft.

4. Sharp Button

Sharp Buttons are usually used as front buttons of DTH Bits for soft formations where fast penetration rates are possible.

5. Flat Button

Flat buttons are usually used as protection buttons to reduce wear on rubbing surfaces of dth bits.

Product photos

Keywords:

dth bit
high air pressure dth hammers bits
faster drilling speed dth hammer bits
concave dth drill hammer bit
concave dth hammer bit
dth drill hammer bit
dth hammer drill bit
hammer drill bit
rock hammer drill bit
dth hammer bits
dth hammers and button bits
high air pressure drill bits producer
6.5"" dth drill bit
mining rock drill bit
dth drill bit
tungsten carbide drill bit
down the hole dth hammer drill bit
low air pressure drill bit
dth bits
dth dill bits and hammer
dth button bits
down the hole button bits
dth drill bits
down the hole drill bit
button bit
high quality dth drill bit
rock button dth drill bit
6" dth bits
mining drill bits
rock drilling bits
water well air rock down the hole dth drilling bits and hammer
deep well drill bit
button rock drill bit
atlas copco rock drill bit
cemented carbide dth button bits
carbide button for dth bits
drill bit 6.5"" for sale
down the hole dth hammer button drill bit
dth hammer button drill bit 6.5""
dth button bit
high air pressure down the hole (dth) bit
dhd350r drill bit 6.5""
cop54 drill bit 6.5""
mission50 drill bit 6.5""
dth drilling bits
high air pressure dth drilling bits
atlas copco button bit
high air pressure dth bits
down the hole dth button bit 165mm
dth hammer 6"" for sale
bit 165mm and dth hammer 6" for sale
dth hammer bit
dth hammers bit manufacture in china
dth hammer bit
button bit for dth hammer
hammer drill bits
water well drilling bits
high quality dth hammer bits
dth hammer bits dhd340a
button for dth bits
best quality dth hammer drill bit
drill bits for mining
dth hammer bit
high quality dth hammer drill bit
hard rock drilling bits
dth drill bit
dth mining bits
down the hole driling bit
tungsten carbide button for dth bits
soft rock dth drilling bit
drill bit manufacturer
high quality rock drill bits
mining rock button drill bit
3.5" series dth drill bits
dth hammers bit
dth drill button bits
dth rock drilling bit
mining dth hammer tool bits
dth hammer tool bits manufacturer
down the hole bits
drilling rig bits
dth drill bit and hammer
dth drill bit and dhd hammer
drill bit and dth hammer
down hole hammer
dth hammer button bits
down hole bit
down the hole bit
dth hammer drill
ingersoll rand dth bits
dth hammer button bit
dth bits for rock drilling
dth bit for water well drilling rig
110mm drilling machine parts/dth bit
90mm 100mm 110mm dth button bit/downhole drill tools for dth hammer
dth drilling bit
hammer bit dth bits
down the hole bit dth bits
dth hammer dth bit
100mm dth drill bits
dth button bit for rock drilling
down the hole hammer bit
dth hammer and bit
tungsten carbide dth drill bit
dth butter bit
dth rock button bit
carbide rock bits button bit
dth hammer bit for sale
carbide button dth hammers drill bits
carbide big dth drill bit
dth rock drill bits
low air pressure dth bit
3.5 inch dth drill bit
hammer button bit