Product Specification

Trailer Electric type concrete pump with 100m pipe and accessories

Description of Electric Type Concrete Pump:

Concrete pump is consist of pump, hydraulic system and pipeline, it could convey ready concrete under pressure through the pipeline continuously and it mainly used in the building, bridge and tunnel construction etc.

our trailer concrete pump can convey concrete to construction site by flexible pipe layout, with function of safety operation, high efficiency, top quality, low investment, and low noise etc.

Main technical parameter of Electric type concrete pump:

I. Hydraulic system

1). The products adopts double-pump and double-circuit open hydraulic system. The pumping hydraulic circuit and S valve swing post hydraulic circuit work separately, which makes the system simple, component life extension, higher reliability, and is easy to fault judgment and ruled out.

2). In view of the weaknesses of big reversing impact of start system, technology is used to pumping hydraulic system to control pilot relief, which avoids the reversing impact and makes the main pumping hydraulic system more reliable and stable.

3). Pumping hydraulic system has safety overflow protection. At the same time, when system is over pressure, oil pump pressure automatically cuts off the interception device to make the main pump obtain more reliable protection.

4). Swinging oil-way adopts constant pressure pump to supply oil. It has great swinging strength and energy-saving function.

5). All pipe line adopt taper sealing or rectangle sealing, and pipe joint sealing is reliable.

II. Electric control system

The outstanding features of electric control system is advanced technology, easy operation and high reliability.

1). 90% of the electric elements are supplied by Mitsubishi Japan, which guarantees high reliability.

2). Compared with the domestic similar products, the electric control system is most simple, with the minimum quantity of components and highest reliability.

3). With wire remote control, it could be convenience to operate.

4). The adopted contact less commutation of proximity switch ensure the reversing reliable.

III. Mechanical (mixing) distributing valve system

1). The design of the main force-summing element, such as hopper and S valve, adopt the mechanical engineering mechanics calculating program. Through this subdivision mesh finite element calculation to its stress state, structure system, the condition of stress concentration, the hopper and S valve have good structure steel level and manufacture ability, which is useful to avoid the phenomenon of hopper distortion and S valve broken in the condition of high-rise pumping.

2). The agitator has unique structure, which totally separates the hydraulic motor and agitator bearing block. It will not influence the hydraulic motor even if there is seal abrasion and slurry leak. Meanwhile, using single motor can avoid the agitator’s mixing torque out of sync caused by bi-motor under the condition of the concrete material abnormal.

3). The service life of wearing parts such as spectacle plate and cutting ring is long after continuous technical research. On the best pumping condition, it can pump 20000m3.

Technical Parameters of Electric Drive Concrete Pump:

IV. Lubrication system

The lubrication system has concentrating automatic lubrication system; Pressure increment device and filter are fixed on output port of lubrication pump to ensure the lubrication system more reliable.

V. Cooling system

The big radiator equipment of forced cooling makes the working oil temperature of hydraulic system below 70℃ and ensures the host of the hydraulic system in a normal state.

Services:

1. installation, debugging, operators training;

2. maintenance:

A. when training your operators, our engineers will give them advice on how to operate the machines correctly;

B. we will send you the operation manual which can help you operate the machines properly, it can also help you to solve the common problems;

C. Call us at any time if you have problems about our concrete plants;

D. If needed, we will send engineers to your site to solve your problems.

3. providing some documents needed for your customs clearance, like commercial invoice, packing list, certificate of origin etc;

4. spare parts supply;

Welcome inquriy.